• Composites Research
• /
• 제16권2호
• /
• pp.26-32
• /
• 2003

레이저 융착된 광섬유의 절단 부위에 대한 보호를 위한 관심이 크게 높아지고 있다 일반적으로 절단된 광섬유의 융착부분은 다른 부위에 비해 상대적으로 매우 취약하며 이러한 이유로 광섬유를 광 통신망에 사용할 때 동일 부분에서의 손실이 추가적으로 일어날 수 있다 일반적으로 광섬유 융착 부위는 일반 광섬유의 파괴 강도에 비해 약 1/10인 0.4～l kg로 감소된다. 이러한 이유로 인해 광 융착 부위의 보강이 절실히 요구되고 있다. 그러나, 이러한 구조물의 대부분이 철심 형태의 구조물을 삽입한 슬리브로 보강됨에 따라 굽힘에 대해 효과적으로 대응하지 못할 뿐 아니라 일단 구조물이 굽혀졌을 경우에는 지속적인 광 손실을 발생시키는 요인이 된다. 이러한 문제점을 보완하기 위하여 복합재료로 제작된 코일형 스프링 구조물 형태의 슬리브가 제안되었다. 이러한 슬리브는 기존의 슬리브의 취약점이었던 직하중에 대해 서로 효과적으로 반응할 뿐 아니라 굽힘 및 인장/압축 하중에도 효과가 있음을 알 수 있었다.

• 멤브레인
• /
• 제24권4호
• /
• pp.292-300
• /
• 2014

내염소성을 갖는 염제거공정용 술폰화 폴리아릴렌 에테르 술폰 랜덤 공중합체(SPAES) thin film composite (TFC)막이 모노글라임 용매를 이용하여 제조되었다. 모노글라임은 선택층인 SPAES만을 용해시키며, 다공성 폴리술폰(예 : Udel$^{(R)}$)층에 대해 비용해성을 지녀, TFC 제조를 위한 선택적 용매로 사용될 수 있다. 또한 개미산이나 디에틸글리콜과는 달리, 환경적으로 무해하며, 매우 낮은 끊는점을 지녔다는 점이 또 다른 장점이 될 수 있다. 다공성 Udel$^{(R)}$ 지지체 위에 코팅시, 코팅용액이 기공구조에 침투하여 유수량을 감소시키는 기공투과현상이 발생하는데, 이를 최소화하기 위해 지지체를 이소프로필알콜과 글리세린 혼합액에서 전처리 후에, 코팅-건조 공정을 통해 결함이 없는 SPAES TFC로 제조된다. 또한, SPAES 선택층의 술폰화도, 고정이온의 염상태 및 물리-화학적 가교효과를 SPAES TFC막을 통한 투과거동과 관련하여 관찰하였다.

• Archives of Plastic Surgery
• /
• 제49권1호
• /
• pp.70-75
• /
• 2022

Background Fingertip injuries are very common; however, the reconstruction of volar pulp defects with nail bed defects is challenging in the absence of the amputated segment. We reconstructed fingertip amputations with nail bed defects using a new surgical approach: a subcutaneous flap and composite graft. Methods We treated 10 fingertip amputation patients without an amputated segment, with exposed distal phalangeal bone and full-thickness nail bed defects between February 2018 and December 2020. All patients underwent two-stage surgery: in the first stage, a subcutaneous flap was performed to cover the exposed distal phalanx, and in the second stage, a composite graft, consisting of nail bed, hyponychium, and volar pulp skin, was applied over the subcutaneous flap. Results All flaps survived and all composite grafts were successful. The wounds healed without any significant complications, including the donor site. The average follow-up duration was 11.2 months (range, 3-27 months). The new nail and the shape of the volar pulp were evaluated during follow-up. All patients were satisfied with their natural fingertip shapes and the new nails did not have any serious deformities. Conclusions A subcutaneous flap in combination with a composite graft fitting the shape of the defect could be another option for fingertip injuries without amputated segments.

• Composites Research
• /
• 제24권2호
• /
• pp.9-13
• /
• 2011

본 논문에서는 zinc blende계열의 결정구조를 갖는 실리콘 내부의 결함을 분석할 수 있는 대칭축 파라메터 (Symmetric axis parameter)방법을 이용하여, 탄성 및 소성 변형을 구별하는 방법을 제시하였다. 분자 동력학 해석프로그램인 LAMMPS를 사용하여, 실리콘에 대한 나노인덴테이션 해석을 수행하였다. 구형 인덴터 아래에 발생한 실리콘내부의 결함은 ring crack에서의 threefold 무늬와 전위발생경로를 보여주였다. 또한, 해석결과는 기존의 이론이나, 실험결과와도 일치하는 것을 확인하였다.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.171-186
• /
• 2020

This paper aims at providing insights on the use of thermosetting liner for the repair of offshore pipelines exposed to corrosion and leakage. The work which covers both experimental and numerical approaches were aspired due to the high cost of repair for pipelines, limitations of thermoplastic material and limited study of reinforced thermosetting liner. The experiment involves a destruction test called the burst test, carried out on an API 5L X42 carbon steel pipe under four case studies, namely (i) intact pipe, (ii) pipe with corrosion defect, (iii) pipe with corrosion defect and repaired with thermosetting liner and (iv) pipe with leakage and repaired with thermosetting liner. The numerical simulation was developed to first validate the experimental results and later to optimize the design of the thermosetting liner in terms of the number of layers required to restore the original strength of the pipe. The burst test shows an improvement in 23% of the burst capacity for the pipe with corrosion defects, after being repaired with a three-layer thermosetting liner. The parametric studies conducted showed that with an addition of thermosetting layers, the burst capacity improves by an average of 1.85 MPa. In conclusions, the improvement in strength can be further increased with increasing thickness of the thermosetting liner. The thermosetting liner was also determined to fail first inside the host pipe.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.245-251
• /
• 2018

Terahertz waves (T-ray) was extensively studied for the NDE (nondestructive evaluation) of characterization of trailing edges for a use of turbines composed with composite materials. The used NDE system were consisted of both CW(Continuous wave) and TDS (Time domain spectroscopy). The FRP composites were utilized for two kinds of both trailing edges of wind energy (non-conducting polymeric composites) and carbon fiber composites with conducting properties. The signals of T-ray in the TDS (Time domain spectroscopy) mode resembles almost that of ultrasound waves; however, a terahertz pulse could not penetrate a material with conductivity unlike ultrasound. Also, a method was suggested to obtain the "n" in the materials, which is called the refractive index (n). The data of refractive index (n) could be solved for the trailing edges. The trailing edges were scanned for characterization and inspection. C-scan and B-scan images were obtained and best optimal NDE techniques were suggested for complicated geometry samples by terahertz radiation. Especially, it is found that the defect image of T-ray corresponded with defect locations for the trailing edges of wind mill.

• 대한소아치과학회지
• /
• 제44권3호
• /
• pp.263-271
• /
• 2017

본 연구는 Molar-incisor hypomineralization(MIH)에 이환된 제1대구치를 그 결손의 크기 별로 분류를 시행하고, 수복치료 후 수복재료에 따른 예후 평가를 목적으로 수행되었다. MIH에 이환되어 맹출 후 치관 붕괴가 관찰된 제1대구치를 Class I에서 III까지 세 단계로 분류하고, 수복치료 이후 수행된 재치료 빈도를 Class와 수복재료별로 나누어 살펴보았다. MIH Class I 결손에서는 실런트, Class II 결손에서는 복합레진이 가장 높은 유지율을 보였다. Class III 결손에서는 기성금속관의 유지율이 가장 높게 나타났다.

• Archives of Reconstructive Microsurgery
• /
• 제9권1호
• /
• pp.6-14
• /
• 2000

Reconstruction of the composite mandibular defect resulting from ablative resection of tumor involved jaw has been challenging task to the plastic surgeon. A wide variety of different techniques were used with limited success until the advent of microsurgery. The high success rate of microsurgical procedures has allowed for significant improvement in both functional and aesthetic results. A variety of free flap donor sites have been used successfully for mandibular reconstruction. Between April of 1991 and August of 1998, 20 mandibular reconstructions were performed for oncologic defects. 4 patients underwent mandibular reconstruction with pectoralis major flap, 3 patients with free nonvascularized bone graft, 1 patient with metal plate. 12 patients underwent microvascular mandibular reconstruction(8: fibula, 4: ilium). The type of free flap was determined by the requirements of the defect. Satisfactory aesthetic and functional results were achieved in all cases without significant complications. So microvascular mandibular reconstruction should be considered as primary choice in all mandibular defect without hesitation.

• 대한두개안면성형외과학회지
• /
• 제21권5호
• /
• pp.309-314
• /
• 2020

Reconstructions of extensive composite scalp and cranial defects are challenging due to high incidence of postoperative infection and reconstruction failure. In such cases, cranial reconstruction and vascularized soft tissue coverage are required. However, optimal reconstruction timing and material for cranioplasty are not yet determined. Herein, we present a large skull defect with a chronically infected wound that was not improved by repeated debridement and antibiotic treatment for 3 months. It was successfully treated with anterolateral thigh (ALT) free flap transfer for wound salvage and delayed cranioplasty with a patient-specific polyetheretherketone implant. To reduce infection risk, we performed the cranioplasty 1 year after the infection had resolved. In the meantime, depression of ALT flap at the skull defect site was observed, and the midline shift to the contralateral side was reported in a brain computed tomography (CT) scan, but no evidence of neurologic deterioration was found. After the surgery, sufficient cerebral expansion without noticeable dead-space was confirmed in a follow-up CT scan, and there was no complication over the 1-year follow-up period.

• Composites Research
• /
• 제31권4호
• /
• pp.151-155
• /
• 2018

기계적 조인트와 접착 조인트는 구조물의 일반적인 접합 방법이다. 접착 조인트는 기계적 체결법에 비해 넓은 면적에 하중이 분포되고 우수한 피로 특성을 가진다. 이러한 특성에도 불구하고, 접착 조인트는 환경조건이나 작업자의 숙련도에 대한 접착 건전성이 크게 달라진다. 따라서 접착 조인트의 건전성을 평가 할 수 있는 기술이 필요하다. CNT를 접착제에 분산시켜 접착조인트의 전기적 특성을 측정하는 전기저항법은 결함을 검출하는 매우 유망한 기술이다. 본 논문에서는 초음파 분쇄기와 3-roll-mill을 이용하여 접착제에 CNT를 균일하게 분산시켰으며, 알루미늄-알루미늄 단일 접착 조인트를 제작하여 탄소나노튜브(CNT) 함량에 따른 정적 강도의 변화를 평가하고, 전기저항법을 이용하여 결함탐지능을 평가하였다.