• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.873-887
• /
• 2015

The continuous composite I-girder should have a sufficient rotation capacity (or ductility) to redistribute the negative bending moment into an adjacent positive bending moment region. However, it is generally known that the ductility of the high strength steel is smaller than that of conventional steel, and application of high strength steel can cause ductility problems in a negative moment region of the I-girder. In this study, moment redistribution of the continuous composite I-girder with high strength steel was studied, where high strength steel with yield stress of 690 MPa was considered (the ultimate stress of the steel was 800 MPa). The available and required rotation capacity of the continuous composite I-girder with high strength steel was firstly derived based on the stress-strain curve of high strength steel and plastic analysis, respectively. A large scale test and a series of non-linear finite element analysis for the continuous composite I-girder with high strength steel were then conducted to examine the effectiveness of proposed models and to investigate the effect of high strength steel on the inelastic behavior of the negative bending moment region of the continuous composite I-girder with high strength steel. Finally, it can be found that the proposed equations provided good estimation of the requited and available rotation capacity of the continuous composite I-girder with high strength steel.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.433-444
• /
• 2019

Shear studs are often used to connect steel girders and concrete deck to form a composite bridge system. The application of precast concrete deck to steel-concrete composite bridges can improve the strength of decks and reduce the shrinkage and creep effect on the long-term behavior of structures. How to ensure the connection between steel girders and concrete deck directly influences the composite behavior between steel girder and precast concrete deck as well as the behavior of the structure system. Compared with traditional multi-I girder systems, a twin-I girder composite bridge system is more simplified but may lead to additional requirements on the shear studs connecting steel girders and decks due to the larger girder spacing. Up to date, only very limited quantity of researches has been conducted regarding the behavior of shear studs on twin-I girder bridge systems. One convenient way for steel composite bridge system is to cast concrete deck in place with shear studs uniformly-distributed along the span direction. For steel composite bridge system using precast concrete deck, voids are included in the precast concrete deck segments, and they are casted with cast-in-place concrete after the concrete segments are erected. In this paper, several sets of push-out tests are conducted, which are used to investigate the heavier of shear studs within the voids in the precast concrete deck. The test data are analyzed and compared with those from finite element models. A simplified shear stud model is proposed using a beam element instead of solid elements. It is used in the finite element model analyses of the twin-I girder composite bridge system to relieve the computational efforts of the shear studs. Additionally, a parametric study is developed to find the effects of void size, void spacing, and shear stud diameter and spacing. Finally, the recommendations are given for the design of precast deck using void for twin I-girder bridge systems.

• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.139-149
• /
• 2022

To simplify the design and reduce the construction cost of traditional multi-girder structural systems, twin I-girder structures are widely used in many countries in recent years. Due to the concern on post-fracture redundancy, however, twin girder bridges are currently classified as fracture critical structures in AASHTO specifications for highway bridges. To investigate the after-fracture behavior of such structures, a composite steel and concrete twin girder specimen was built and an artificial fracture through the web and the bottom flange was created on one main girder. The static loading test was performed to investigate its mechanical performance after a severe fracture occurred on the main girder. Applied load and vertical displacement curves, and the applied load versus strain relationships at key sections were measured. To investigate the load distribution and transfer capacities between two steel girders, the normal strain development on crossbeams was also measured during the loading test. In addition, both shear and normal strains of studs were also measured in the loading test to explore the behavior of shear connectors in such bridges. The functions and structural performance of structural members and possible load transfer paths after main girder fractures in such bridges were also discussed. The test results indicate in this study that a typical twin I-girder can resist a general fracture on one of its two main girders. The presented results can provide references for post-fracture performance and optimization for the design of twin I-girder bridges and similar structures.

• 한국강구조학회 논문집
• /
• 제26권3호
• /
• pp.205-217
• /
• 2014

본 연구에서는 인장 플랜지에 HSB 고성능 강재를 적용한 강합성 복합단면 I-거더의 정모멘트에 대한 휨저항강도 및 연성 요구조건을 검토하였다. AASHTO LRFD 설계기준에서 강합성 거더의 정모멘트에 대한 공칭 휨저항강도 및 연성 요구조건은 소성모멘트와 소성 중립축을 이용하여 규정하고 있으며, 이때 소성모멘트와 소성중립축은 일반 강재에 대하여 유도된 값이다, 하지만 응력-변형률 거동에서 일반강재와 다르게 HSB 고성능 강재의 소성영역은 명확히 정의될 수 없다. 따라서 고성능 강재의 이상화된 응력-변형률 곡선을 통해 고성능 강재의 소성영역을 가정하여 소성모멘트를 정의하였으며, 다양한 치수를 갖는 임의의 단면에 대하여 수행된 수치 해석의 결과를 통해 인장 플랜지에 HSB 고성능 강재를 적용한 강합성 복합단면 I-거더의 연성 요구조건 및 공칭 휨저항강도 산정식을 제안하였다.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.51-61
• /
• 2018

A new I-girder consisted of top concrete-filled tubular flange and corrugated web has been proved to have high resistance to both global buckling of the entire girder and local buckling of the web. This study carries out theoretical analysis and experimental tests for this new I-girder to investigate the stress distribution in the flanges and in the corrugated web. Based on some reasonable assumptions, theoretical equations for calculating the normal stress in the flanges and the shear stress in the corrugated web are presented. To verify the accuracy of the presented equations, experimental tests on two specimens were carried out, and the experimental results of stress distribution were used to assess the theoretical prediction. Comparison between the two results indicates that the presented theoretical equations have enough accuracy for calculating the stress in the new I-girder, and thus they can be used reliably in the design stage.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.8-16
• /
• 2015

Prestressed concrete (PSC) is a method in which prestressed tendon is placed inside and/or outside the reinforced concrete member and the compressive force applied to the concrete in advance to enhance the engineering properties of concrete member which is weak under tension. In this paper we suggested the precast PSC girder assembled with segments of portable size and weight at the factory. The segments of precast PSC girder will be delivered and assembled as a unit of PSC girder at the site. Consequently, we suggested new-type of precast segmented PSC girder with different shapes of segment cross-section (i.e., I-shape, Box-shape). To mitigate the problems associated with the field splice between the segments of precast PSC girder anchor system is attached near the neutral axis of the girder and relatively uniform compression throughout the girder cross-section is applied. Prior to the experimental investigation, analytical investigation on the structural behavior of precast PSC girder was performed and the serviceability (deflection) and safety (strength) of the girder were confirmed. In addition, 4-point bending test on the girder was conducted to investigate the structural performance under bending. From the experimental investigation, it was found that the precast PSC girder spliced with 3 and 5 segments has sufficient in serviceability and safety conditions and it was also observed that the point where the segments spliced has no defects and the girder behaves as a unit.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1465-1486
• /
• 2016

Conventional plate I-girders are sensitive to local buckling of the web when they are subjected mainly to shear action because the slenderness of the web in out-of-plane direction is much bigger. The local buckling of the web can also cause the distorsion of the plate flange under compression as a thin-walled plate has very low torsional stiffness due to its open section. A new I-girder consisted of corrugated web, a concrete-filled rectangular tubular flange under compression and a plate flange under tension is presented to improve its resistance to local buckling of the web and distorsion of the flat plate flange under compression. Experimental tests on a conventional plate I-girder and a new presented I-girder are conducted to study the failure process and the failure mechanisms of the two specimens. Strain developments at some critical positions, load-lateral displacement curves, and load-deflection curves of the two specimens have all be measured and analyzed. Based on these results, the failure mechanisms of the two kinds of I-girders are discussed.

• 한국콘텐츠학회논문지
• /
• 제14권7호
• /
• pp.511-517
• /
• 2014

일반철도 및 고속철도를 포함한 철도교량의 상부구조로 현재 우리나라에서 주로 사용되고 있는 교량형식은 크게 박스 거더교와 I형 거더교로 구분된다. 박스 거더교는 동적 거동에 대한 안전성이 우수하기 때문에 주로 고속철도 교량으로 많이 사용된다. I형 거더교는 일반철도 교량으로 주로 사용되며, 일반 PSC 거더교 형태와 철골철근콘크리트로 합성화된 구조인 프리플렉스 거더교의 형태로 크게 구분되고 또한 새로운 형식도 지속적으로 개발되고 있는 추세에 있다. 본 연구에서는 현행 철도교설계기준에 의거하여 각 형식별로 경간장에 따라 거더 설계를 실시하여 적절한 형고를 분석하여 경간장에 따른 구조적 및 경제적 효율성을 비교분석하였다. 비교분석을 수행한 결과, 구조적 효율성의 측면에서는 프리플렉스 거더교 형태의 교량이 경간장에 따른 형고가 가장 낮은 것으로 나타났으며, 경제적 효율성의 측면에서는 일반 PSC 거더교 형태의 교량이 가장 효과적인 것으로 평가되었다.

• 한국철도학회논문집
• /
• 제11권5호
• /
• pp.471-476
• /
• 2008

일반철도 및 고속철도를 포함한 철도교량의 상부구조로 현재 우리나라에서 주로 사용되고 있는 교량형식은 크게 박스 거더교와 I형 거더교로 구분된다. 박스 거더교는 동적 거동에 패한 안전성이 우수하기 때문에 주로 고속철도 교량으로 많이 사용된다. 1형 거더교는 일반철도 교량으로 주로 사용되며, 일반 PSC 거더교 형태와 철골 철근콘크리트로 합성화된 구조인 프리플렉스 거더교의 형태로 크게 구분되고 또한 새로운 형식도 지속적으로 개발 되고 있는 추세에 있다. 본 연구에서는 현행 철도교설계기준에 의거하여 각 형석별로 경간장에 따라 거더 설계를 실시하여 적절한 형고를 분석하며, 개략적인 교량가설 공사비를 산출하여 사용 경간장에 따른 구조적 효율성 및 경제성을 비교분석하였다. 이에 따른 비교분석을 수행한 결과, 구조적 효율성의 측면에서는 프리플렉스 거더교 형태의 교량이 경간장에 따른 형고는 가장 갖은 것으로 나타났으며, 가설 공사비의 측면에서는 일반 PSC 거더교 형태의 교량이 가장 경제적인 것으로 평가되었다.

• Steel and Composite Structures
• /
• 제10권3호
• /
• pp.223-243
• /
• 2010

This paper reports recent developments concerning the application of Generalised Beam Theory (GBT) to the structural analysis of steel-concrete composite bridges. The potential of GBT-based semi-analytical or finite element-based analyses in this field is illustrated/demonstrated by showing that both accurate and computationally efficient solutions may be achieved for a wide range of structural problems, namely those associated with the bridge (i) linear (first-order) static, (ii) vibration and (iii) lateral-torsional-distortional buckling behaviours. Several illustrative examples are presented, which concern bridges with two distinct cross-sections: (i) twin box girder and (ii) twin I-girder. Allowance is also made for the presence of discrete box diaphragms and both shear lag and shear connection flexibility effects.