• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.558-565
• /
• 2019

In this study, dimethyl silicone oil and liquid paraffin were combined and subsequently emulsified; the resulting mixture was innovatively incorporated into desulfurized gypsum to resolve its drawback of a poor water resistance. The waterproof mechanism of the composite emulsion and liquid paraffin emulsion with mass fractions of 1%, 2%, 3%, and 4% were investigated. The effect of the desulfurized gypsum on the waterproof performance and basic mechanical properties were also investigated. The configuration of the composite waterproofing agent was characterized by FTIR and ¹HNMR. The results showed that, compared with the traditional liquid paraffin emulsion-based waterproofing agent, the softening coefficient of the silicone oil paraffin composite emulsion-based water-repellent agent was increased by 60% and attained a value of 0.89. Combined with the waterproof mechanism and microscope morphology analysis of gypsum hydration products, the improvement in the water resistance of water resistance was primarily attributed to the formation of a silicone hydrophobic membrane between the crystals of the gypsum block; this ensured that water could not penetrate the crystal.

• 폴리머
• /
• 제25권5호
• /
• pp.617-624
• /
• 2001

음이온계 유화제를 사용하여 monomer pre-emulsion을 제조한 다음 ammonium persulfate를 개시제로 하여 단계 중합법에 의해 새로운 입자의 생성이 적고 중합 과정에서 안정성이 우수한 poly(methyl methacrylate)(PMMA)/polystyrene (PSt) 라텍스를 제조하였다. 본 연구에서는 shell 중합시에 새로운 입자의 생성이 적고 중합 중 안정성이 우수한 라텍스를 제조하기 위해 개시제농도, 유화제농도, 중합온도가 PMMA/PSt와 PSt/PMMA의 core-shell 구조에 미치는 영향을 알아보았다. 중합한 라텍스를 입도분석기 (particle size analyzer: PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계 (differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 필름 조막성 (minimum film formation temperature: MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 또 다른 특성을 확인하였다.

• 공업화학
• /
• 제29권6호
• /
• pp.682-689
• /
• 2018

본 연구에서는 중심합성계획모델을 사용하여 닥나무 추출물을 함유한 cosmeceuticals 유화액의 안정성 조건을 설정하였다. 중심합성계획모델을 이용한 유화 최적화 조건으로 계량인자는 유화제와 유화안정제의 농도로, 반응치는 ESI와 PDI로 설정하였으며 ESI의 목표값은 60% 이상, PDI의 목표값은 최소값으로 하였다. 유화 최적화 결과 유화제와 유화안정제의 농도는 각각 3.73, 3.07 wt%이었으며, 이때 예상 반응치 ESI는 60%, PDI는 0.585로 산출되었다. 유화제와 유화안정제의 농도가 증가할수록 제조한 유화액의 안정성은 증가하는 경향을 보였으며, 두 가지의 계량인자 중 ESI에 가장 큰 영향을 미치는 인자는 유화제였으며, PDI에 대한 두 인자의 영향은 유사하게 나타났다. 중심합성계획모델의 실험조건으로 제조한 cosmeceuticals 유화액의 ESI는 적어도 약 45% 이상의 안정성을 보였으나 제조 후 4주 뒤에는 모두 분리되었다. 유화제의 농도가 3.72 wt% 이상일 때 ESI의 값은 60% 이상으로 나타났으며, 유화안정제의 농도가 증가할수록 층 분리 속도는 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3303-3306
• /
• 2014

A facile and effective approach has been developed to prepare hybrid hollow microspheres, via consecutive processes of pickering mini-emulsion polymerization for core-shell formation, and calcination of the sacrificial core. The resulting hollow composite particles have mono-layered shells. The morphology and size characteristics of synthesized composite particles were investigated, using dynamic light scattering (DLS) and scanning electron microscopy (SEM) measurements.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.593-601
• /
• 1987

A thermodynamic model to predict the stability of the water-in-oil type emulsion and the size of the droplets in stable emulsions was developed. Using this model, the effects of various factors government the droplet size in the metal salt solution-kerosene-span 80 system for the preparation of Al2O3-ZrO2 composite powders were investigated. It was shown that the given emulsion systems were thermodynamically unstable in every case but could be kinetically meta stable. When radius ofthe droplet was below nm, the increase in entropy change due to the configurational contribution of small droplets dominated the total free energy change for emulsification. The optimum conditions under which smaller deoplet was obtained were proposed and the validity of the model was proved with diameters of the droplet and composite powders experimentally determined.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.487-494
• /
• 1990

$Al_2O_3$-20w/o $ZrO_2$ composite powders were prepared by the emulsion-coprecipitation method and the effects of preparative conditions on powder characteristics were investigated. In the preparation of $Al_2O_3$-$ZrO_2$ composite powders, toluene was used instead of kerosene as the oil phase in emulsions. After coprecipitation, the emulsion was easily broken into a single liquid phase by adding methanol, and then precipitates could be effectively collected by filteration. The fact that all $ZrO_2$ phases present at room temperature in composite powders calcined at $1100^{\circ}C$ after washed by methanol had a tetragonal structure confirmed that methanol-washing enhanced the dispersibility of fine $ZrO_2$ particles in $Al_2O_3$ matrix. $Al_2O_3$-$ZrO_2$ composite powders were spherical particles of 0.2${\mu}{\textrm}{m}$ diameter. Pellets sintered at $1650^{\circ}C$ for 2hrs showed the relative theoretical density of 97.3% and the fracture toughness of 5.01MN/$m^{3/2}$.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.69-75
• /
• 2004

In this study, various model composite latexes were synthesized using n-butyl acrylate and methyl methacrylate as comonomers by seeded multi-staged emulsion polymerization. Monodispersed model composite latex particles with size of 190 nm and polydispersity index of 1.05, which have various morphology including random copolymer particle, soft-core/hard-shell particle, hard-core/soft shell particle, and gradient-type copolymer particle, homopolymers particles were prepared. The designed morphology of model composite particles were confirmed.

• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.284-292
• /
• 1988

Alumina-zirconia composite powders for the purpose of improving fracture toughness and thermal shock resistance of alumina were prepared by the emulsion-kerosene drying method. The average particle size of composite powders was less then 1 $\mu\textrm{m}$ and their shapes were spherical. It was shown that the average particle size of composite powders decreased with the concentration of metal-salt in solution and the amount of span 80 added when preparing emulsions. The structure of all zirconia in composite powders heat-treated at 1200$^{\circ}C$ was a tetragonal form at room temperature. This result implied that fine zirconia particles were homogeneously dispersed in the alumina matrix.

• 공업화학
• /
• 제32권5호
• /
• pp.562-568
• /
• 2021

천연 밀배아유와 복합 sugar ester를 이용하여 밀배아유 원료 O/W (oil in water) 유화액을 제조하였다. HLB 값, 유화제의 첨가량 및 유화시간이 O/W wheat germ oil 유화액의 평균 입자크기, 유화점도 및 ESI에 미치는 영향을 조사하였으며, 반응표면분석방법인 중심합성계획모델에 의해 제조된 유화과정의 파라미터를 모의하고 최적화하였다. O/W wheat germ oil 유화액의 제조를 위한 최적의 공정조건은 HLB 값(hydrophile-lipophile balance value)은 8.4, 유화제의 첨가량은 6.4 wt%, 유화시간은 25.4 min이며, 최적조건에서 중심합성계획(central composite design, CCD-RSM) 모델을 통한 예측 반응치는 7일 후의 유화액을 기준으로 MDS (mean droplet size)= 206 nm, 점도 = 8125 cP, ESI 98.2%이었다. 또한 실제 실험을 통해 얻어진 유화액의 MDS, 점도 및 ESI는 각각 209 nm, 7974 cP 및 98.7%로 나타났다. 따라서 중심합성계획 모델을 통해 밀배아유 원료 유화액의 안정성을 평가하는 최적화 과정을 설계할 수 있었다.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.110-118
• /
• 2015

In this study, diethylaminoethyl methacrylate-styrene-butadiene terpolymer (DEAEMA-SBR), in which diethylaminoethyl methacrylate (DEAEMA) was introduced to the SBR molecule as a third monomer, was synthesized by cold emulsion polymerization. It is expected that amine group introduced to a rubber molecule would improve dispersion of silica by the formation of hydrogen bond (or ionic coupling) between the amine group and silanol groups of silica surface. The chemical structure of DEAEMA-SBR was analyzed using proton nuclear magnetic resonance spectroscopy (H-NMR), Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). Then, various properties of DEAEMA-SBR/silica composite such as crosslink density, bound rubber content, abrasion resistance, and mechanical properties were evaluated. As a result, bound rubber content and crosslink density of DEAEMA-SBR/silica compound were higher than those of the SBR 1721 composite. Abrasion resistance and moduli at 300% elongation of the DEAEMA-SBR/silica composite were better than those of SBR 1721 composite due to the high bound rubber content and crosslink density. These results are attributed to high affinity between DEAEMA-SBR and silica. The proposed study suggests that DEAEMA-SBR can help to improve mechanical properties and abrasion resistance of the tire tread part.