• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.45-54
• /
• 2011

This paper discuss about structure modification method of the reciprocating compressor to reduce its vibration and noise in small refrigeration system. The structure modification is applied using analytic FE models and then applying suggested Component Mode Synthesis(CMS) algorithms. The efficient CMS algorithms to a compressor's fixed base design problem are analytically tried and verified from some experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.837-842
• /
• 2009

The efficient dynamic modeling of a satellite with flexible solar arrays is established by using the component mode synthesis technique. A flexible satellite model can be defined as the assembly of two sub-structures, central body and solar array. The reduced models of each substructure, which are expressed in each local frame, are coupled with respect to the satellite reference frame. The dynamic modeling method is applied to the numerical example of a satellite with a single solar array, and is verified by investigating the transfer function results with considering the solar array rotation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.241-248
• /
• 1987

The theoretical backgrounds of the several methods were surveyed and reviewed to fin out the adequate one to determine equivalent modal damping values in solving the dynamic problem of soil-structure interaction by mode superposition method. Furthermore the rigorous damping matrix of equation of motion was obtained through component mode synthesis technique and used in direct integration of the equation. The analytical results by direct integration method were compared with those of mode superposition approach using the various sets of equivalent modal damping values calculated by the methods to be reviewed. Two types of superstructures and four kinds of subsurface conditions were considered and combined to make soil-structure coupled models. It was realized that dissipating energy method gives the equivalent modal damping values which lead the most similar results to direct integration ones. In case of fixed base, the responses of all methods except stiffness weighted approach are almost equal to those of direct integration method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.700-708
• /
• 2014

Jet engine modulation(JEM) is a frequency modulation phenomenon of the radar signal induced by electromagnetic scattering from a rotating jet engine turbine. Although JEM can be used as a representative radar target recognition method by providing unique information on the target, its recognition performance may be degraded in the observation range of weakly present JEM. Hence, this paper presents a method for extracting the JEM component by decomposing the radar signal into intrisic mode functions(IMFs) via complex empirical mode decomposition(CEMD) and by combining them based on signal eccentricity. Its application to various signals demonstrated that the proposed method improved the clarity of JEM analysis and could extend the effective observation range of JEM.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.606-612
• /
• 2016

A Captive Flight Test(CFT) is used to verify the performance of missile component such as seeker and guiding algorithm of missile. Recently most of surface to air missile adapts multi-mode guidance method which include command guidance and active/passive guidance. A CFT system for missile system adapting multi-mode guidance method consists of pod equipment, command transmitting system and measuring system. In this paper, we proposed CFT system and testing method for missile which adapt multi-mode guidance, and system integration procedure by using distributed missile system integration method and procedure. The proposed CFT system and system integration method was applied to CFT of surface to air missile, and brought successful result.

• Communications for Statistical Applications and Methods
• /
• v.22 no.2
• /
• pp.159-172
• /
• 2015

This paper considers the problem of reconstructing an underlying signal from noisy data. This paper presents a reconstruction method based on synchrosqueezed wavelet transform recently developed for multiscale representation. Synchrosqueezed wavelet transform based on continuous wavelet transform is efficient to estimate the instantaneous frequency of each component that consist of a signal and to reconstruct components. However, an objective selection method for the optimal number of intrinsic mode type functions is required. The proposed method is obtained by coupling the synchrosqueezed wavelet transform with cross-validation scheme. Simulation studies and musical instrument sounds are used to compare the empirical performance of the proposed method with existing methods.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.71-78
• /
• 1998

The eigenvalue problem is presented for the building with added viscoelastic dampers by using component mode method. The Lagrange multiplier formulation is used to derive the eigenvalue problem which is expressed with the natural frequencies of the building, the mode components at which the dampers are added, and the viscoelastic property of the damper. The derived eigenvalue problem has a nonstandard form for determining the eigenvalues. Therefore, the problem is examined by the graphical depiction to give new insight into the eigenvalues for the building with added viscoelastic dampers. Using the present approach the exact eigenvalues can be found and also upper and lower bounds of the eigenvalues can be obtained.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.91-98
• /
• 1994

An efficient optimization procedure combining the frequency approximation technique and the component-mode synthesis method is proposed for the structural dynamic optimization of the large structures subject to prescribed natural frequency constraints. Frequency constraints are approximated by using the first-order sensitivities with respect to both design parameters and their reciprocals. The component-mode synthesis method proposed by the authors in Ref.[8] is used for the repetitive detail finite-element analysis and sensitivity analysis. The validity of the proposed optimization procedure is confirmed through the numerical implementation of some examples. The presented approximation technique requires much smaller number of repetitive analysis than that using the sensitivities with respect to design parameters only, and further improvement in the numerical efficiency is achieved by the adoption of the introduced component-mode synthesis.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.684-694
• /
• 2021

Resting-state Functional Magnetic Resonance Imaging(fMRI) data detects the temporal correlations in Blood Oxygen Level Dependent(BOLD) signal and these temporal correlations are regarded to reflect intrinsic cortical connectivity, which is deactivated during attention demanding, non-self referential tasks, called Default Mode Network(DMN). The relationship between fMRI and anatomical connectivity has not been studied in detail, however, the preceded studies have tried to clarify this relationship using Diffusion Tensor Imaging(DTI) and fMRI. These studies use method that fMRI data assists DTI data or vice versa and it is used as guider to perform DTI tractography on the brain image. In this study, we hypothesized that functional connectivity in resting state would reflect anatomical connectivity of DMN and the combined images include information of fMRI and DTI showed visible connection between brain regions related in DMN. In the previous study, functional connectivity was determined by subjective region of interest method. However, in this study, functional connectivity was determined by objective and advanced method through Independent Component Analysis. There was a stronger connection between Posterior Congulate Cortex(PCC) and PHG(Parahippocampa Gyrus) than Anterior Cingulate Cortex(ACC) and PCC. This technique might be used in several clinical field and will be the basis for future studies related to aging and the brain diseases, which are needed to be translated not only functional connectivity, but structural connectivity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.394-402
• /
• 2009

To investigate the heavy-weight impact noise of apartment houses, numerical analysis was performed. The analysis acoustic pressure consider acoustic mode by finite element method. The variables considered effecting on the acoustic pressure are the Acoustic mode, acoustic damping, and the impulse load. The heavy-weight impact noise is a changeable value in the room. Since the most part of the frequency component of heavy-weight impact noise has low frequency. The noise in low frequency is related to the vibration of structure, the reflection of acoustic wave caused by wall and the standing wave called by acoustic mode. The prediction by the numerical analysis was verified with test result of the heavy weight-impact noise at apartment houses.