• 제목/요약/키워드: component method

검색결과 6,504건 처리시간 0.038초

발수 성분을 포함하는 프로필렌글리콜(PG) 기반 고속철도차량용 제·방빙액의 특성 (Properties of De/Anti-icing Fluid for High Speed Railway Rolling Stock Based on Propylene-glycol Containing Water Repellent Agent)

  • 박진명;김태현;양정무;윤차중;이홍기
    • 공업화학
    • /
    • 제34권1호
    • /
    • pp.69-74
    • /
    • 2023
  • 화학적 제빙 방법으로 프로필렌글리콜 제빙액은 동절기 고속철도차량 하부 및 대차부에 부착되는 설빙으로 인한 결빙을 녹이는데 적용가능하다. 프로필렌글리콜 제빙액을 운행 전 고속철도차량에 철도차량 하부 및 대차부에 미리 살포하여 눈의 부착을 최소화하면 해빙 효율을 더 높일 수 있다. 고속철도의 경우 프로필렌글리콜 제빙액을 살포하여도 고속으로 운행 시 대차 표면에서 제빙액은 거의 소실되기 때문에 눈의 부착으로 인한 결빙에 대한 방빙성능은 떨어진다. 본 연구에서는 동절기 고속철도차량 하부 및 대차부에 부착되는 설빙으로 인한 결빙을 방지하기 위해 표면의 결빙을 방지하는 발수 성분을 포함하는 프로필렌글리콜 제·방빙액의 특성을 연구하였다. 발수제의 종류에 따른 점도, 융빙성능, 접촉각 및 방빙성능에 대한 비교 평가를 실시하여 고속철도차량 제·방빙액으로 최적의 물질을 찾고자 하였다. 평가 결과 에톡시실란 타입의 발수제 성분을 포함하는 제·방빙액이 가장 적합한 것으로 확인하였다.

추출용매에 따른 팔각회향의 주성분 함량비교 (Comparison of Major Compounds in Illicii Veri Fructus by Extraction Solvents)

  • 이아영;김효선;최고야;천진미;문병철;김호경
    • 대한본초학회지
    • /
    • 제28권6호
    • /
    • pp.47-51
    • /
    • 2013
  • Objectives : The Illicii Veri Fructus was not only traditional medicine but also food in Asia. The aim of this study was selection of optimum solvent in the fruit of Illicii Veri Fructus because an appropriate solvent affect a medicinal effect. Methods : Illicii Veri Fructus was carried out ultrasonic-assisted extraction as various solvents. Two main compounds, p-anisaldehyde and anethole, were successfully analyzed by high performance liquid chromatography-photodiode array detector (HPLC-PDA) and carried out method validation according to ICH guideline. The optimum solvent selected by comparing with yields of two main ingredients. Results : The p-anisaldehyde and anethole were detected at approximately 8.0 min and 19.8 min, respectively. It was all below 5.0% that RSD of retention time and peak area for two main peaks. Calibration curves of two compounds were good linearity as $R^2$ >0.9999. All of the precisions and accuracy were good intra-day and inter-day as below 5.0% RSD. Limited of detection (LOD) of p-anisaldehyde and anethole were analyzed as $0.134{\mu}g/mL$ and $4.286{\mu}g$, respectively. Limited of quantification (LOQ) of two compounds were $0.407{\mu}g$ and $12.989{\mu}g$, respectively. As a result of this study, p-anisladehyde was detected as 0.209 ~ 0.467%, however anethole was not detected in the distilled water. Conclusions : Anethole was main component as 5.329 ~ 6.815% except for water extraction. Methanol extraction among various solvents was detected the highest contents of p-anisaldehyde and anethole as 0.467(${\pm}0.008$)% and 6.815(${\pm}0.220$)%, respectively.

하이브리드형 무인 항공 전자탐사시스템 자료의 분석 및 해석기술 개발 (Development of Data Analysis and Interpretation Methods for a Hybrid-type Unmanned Aircraft Electromagnetic System)

  • 김영수;강현우;방민규;설순지;김보나
    • 지구물리와물리탐사
    • /
    • 제25권1호
    • /
    • pp.26-37
    • /
    • 2022
  • 최근의 정보기술발달에 힘입어 소형 무인 비행체를 활용한 각종 물리탐사 방법들이 제안되고 그 해석방법들에 대한 연구가 소개되고 있다. 이 연구에서는 한국지질자원연구원에서 개발 중인 송수신 분리형 무인 항공 전자탐사 장비를 소개하고 획득한 자료의 타당성 검증을 위해 수행된 시험자료를 분석하여 해석하는 방법을 제안하는 연구를 수행하였다. 특히, 수신기가 드론에 매달린 채로 탐사가 수행되기 때문에 발생되는 흔들림 성분의 영향을 고찰하고 회전변환을 이용하여 보정하였다. 한편, 비행체에 의한 탐사는 송수신기 간의 거리, 고도 등 여러 탐사 변수들이 실시간으로 변하게 되고 획득한 자료는 지상 탐사보다 더 많은 잡음을 포함하게 되어 전통적인 해석방법으로의 해석에 많은 어려움이 따른다. 따라서, 이 연구에서는 획득한 전자탐사자료를 이용하여 빠르게 겉보기 비저항을 예측할 수 있는 순환 인공 신경망 모델을 구축하였으며, 현장자료의 분석을 통해 얻어진 잡음들을 수치모델링을 통해 생성한 학습자료에 포함시켜 잡음이 포함된 자료의 예측성능을 향상시켰다. 학습된 순환 신경망 모델을 시험탐사 현장자료에 적용시킨 결과 지상탐사 및 전기비저항 탐사 결과와 유사한 겉보기 비저항을 예측함을 확인하였다.

Innovative Technologies in Higher School Practice

  • Popovych, Oksana;Makhynia, Nataliia;Pavlyuk, Bohdan;Vytrykhovska, Oksana;Miroshnichenko, Valentina;Veremijenko, Vadym;Horvat, Marianna
    • International Journal of Computer Science & Network Security
    • /
    • 제22권11호
    • /
    • pp.248-254
    • /
    • 2022
  • Educational innovations are first created, improved or applied educational, didactic, educative, and managerial systems and their components that significantly improve the results of educational activities. The development of pedagogical technology in the global educational space is conventionally divided into three stages. The role of innovative technologies in Higher School practice is substantiated. Factors of effectiveness of the educational process are highlighted. Technology is defined as a phenomenon and its importance is emphasized, it is indicated that it is a component of human history, a form of expression of intelligence focused on solving important problems of being, a synthesis of the mind and human abilities. The most frequently used technologies in practice are classified. Among the priority educational innovations in higher education institutions, the following are highlighted. Introduction of modular training and a rating system for knowledge control (credit-modular system) into the educational process; distance learning system; computerization of libraries using electronic catalog programs and the creation of a fund of electronic educational and methodological materials; electronic system for managing the activities of an educational institution and the educational process. In the educational process, various innovative pedagogical methods are successfully used, the basis of which is interactivity and maximum proximity to the real professional activity of the future specialist. There are simulation technologies (game and discussion forms of organization); technology "case method" (maximum proximity to reality); video training methodology (maximum proximity to reality); computer modeling; interactive technologies; technologies of collective and group training; situational modeling technologies; technologies for working out discussion issues; project technology; Information Technologies; technologies of differentiated training; text-centric training technology and others.

3D Printing 기술을 활용한 Digital Craft 융합적 사례 연구 (A Study on the Digital Craft Convergence Cases Using 3D Printing Technology)

  • 장지수;정진헌
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권3호
    • /
    • pp.105-110
    • /
    • 2022
  • 4차 산업혁명이라는 흐름에 따라 서로 다른 분야의 결합을 통해 새로운 분야가 생기는 융복합의 시기를 맞아 예술 분야 중 크래프트 영역의 확장성에 관해 연구하고자 하였다. 연구 내용은 디지털 크래프트의 정의와 가치에 대한 이론적 배경을 토대로 3D 프린팅 기술을 활용한 크래프트 사례를 분석한 것이다. 연구 결과, 3D 프린팅 기술을 활용한 크래프트 작품은 융합적 표현 방식에 따라 크게 네 가지의 형태로 나누어 볼 수 있었다. 첫 번째로 혼합형은 전통 크래프트 형식에서 크게 벗어나지 않으면서도 조화롭게 제작된 것이 가장 큰 특징이었다. 두 번째로 부품형은 일정한 형태와 세밀한 작업이 장점인 디지털 기술의 특징이 가장 잘 나타난 형태로 제작되었다. 세 번째로 구조형은 3D 프린터로 출력한 결과물을 베이스로 하여 전통 크래프트 기법이 덧입혀져 아날로그 감성이 묻어나는 작품이 되었다. 네 번째로 연결형은 본 연구의 분석 사례 중에서 독창성과 고유성이 가장 크게 엿보인 작품이었다. 디지털 기술이 널리 활용되고 있는 만큼, 효과적인 작업 방향성에 관하여 지속적인 연구가 필요하다고 판단된다.

복합재료를 적용한 1MW급 조류 발전 터빈 블레이드의 설계와 구조 안전성 평가 (Design and Structural Safety Evaluation of 1MW Class Tidal Current Turbine Blade applied Composite Materials)

  • 정해창;최민선;양창조
    • 해양환경안전학회지
    • /
    • 제28권7호
    • /
    • pp.1222-1230
    • /
    • 2022
  • 로터 블레이드는 조류발전 터빈의 매우 중요한 구성 요소로서, 해수의 높은 밀도로 인해 큰 추력(Trust force)와 하중(Load)의 영향을 받는다. 따라서 블레이드의 형상 및 구조 설계를 통한 성능과 복합소재를 적용한 블레이드의 구조적 안전성을 반드시 확보해야 한다. 본 연구에서는 블레이드 설계 기법인 BEM(Blade Element Momentum) 이론을 이용해 1MW급 대형 터빈 블레이드를 설계하였으며, 터빈 블레이드의 재료는 강화섬유 중의 하나인 GFRP(Glass Fiber Reinforced Plastics)를 기본으로 CFRP(Carbon Fiber Reinforced Plastics)를 샌드위치 구조에 적용해 블레이드 단면을 적층(Lay-up)하였다. 또한 유동의 변화에 따른 구조적 안전성을 평가하기 위해 유체-구조 연성해석(Fluid-Structure Interactive Analysis, FSI) 기법을 이용한 선형적 탄성범위 안의 정적 하중해석을 수행하였으며, 블레이드의 팁 변형량, 변형률, 파손지수를 분석해 구조적 안전성을 평가하였다. 결과적으로, CFRP가 적용된 Model-B의 경우 팁 변형량과 블레이드의 중량을 감소시켰으며, 파손지수 IRF(Inverse Reserce Factor)가 Model-A의 3.0*Vr를 제외한 모든 하중 영역에서 1.0 이하를 지시해 안전성을 확보할 수 있었다. 향후 블레이드의 재료변경과 적층 패턴의 재설계뿐 아니라 다양한 파손이론을 적용해 구조건전성을 평가할 예정이다.

전문가집단을 통해 본 '농촌다움' 인식에 관한 기초연구: 델파이와 AHP분석을 중심으로 (A Basic Study on 'Ruralism' Perception through Expert Group: Focusing on Delphi and AHP Analysis)

  • 도지윤;서기춘;정명철;최진아
    • 환경영향평가
    • /
    • 제32권4호
    • /
    • pp.251-259
    • /
    • 2023
  • 본 연구는 새로운 시대에 변화하는 농촌다움의 새로운 규정과 범주를 위한 기초적 방향을 목적으로 수행되었다. 체계적 문헌고찰을 토대로 농촌다움의 정의, 기준, 범위, 구성요소 항목으로 구분하여 델파이 분석과 AHP분석을 실시한 결과는 다음과 같다. 첫째, 대부분의 농촌을 표상하는 연구를 통해 농촌다움이 가장 이슈가 된 키워드임을 파악할 수 있었으며, 농촌의 다양한 범위를 각각 연구하고 있어 이를 포괄하지 못하는 연구가 대다수임을 알 수 있었다. 둘째, 델파이 조사를 통하여 농촌다움의 규정 및 범주 설정을 위한 항목분류와 명확한 개념 정립을 위한 근거자료로 활용될 수 있는 키워드를 도출할 수 있었다. 셋째, 계층적 의사결정법을 통하여 항목별 기준선이 될 수 있는 우선순위 도출뿐만 아니라 경관적인 요인이 농촌다움을 형성하는 가장 중요한 것임을 파악할 수 있었다. 본 연구는 농촌다움 개념 정립을 위한 기초자료로 최소한의 기준선을 제공한 것에 의의가 있으며, 전문가 집단에 의존한 한계점을 극복하기 위하여 다양한 관점에서의 검토가 추가된다면 미래지향적인 농촌다움을 설정할 수 있을 것으로 판단된다.

연구학교 보고서에 나타난 중학교 과학과 과정중심평가의 특징 (Characteristics of Process-Focused Assessment in Science Classes from the Research Middle School Reports)

  • 김종희;박지영;유난숙;주민선
    • 대한지구과학교육학회지
    • /
    • 제16권2호
    • /
    • pp.182-195
    • /
    • 2023
  • 이 연구에서는 과정중심평가의 특징이 중학교 과학 교육 현장에서는 어떻게 구현되고 있는지를 살펴보기 위해 연구학교 보고서를 분석하였다. 과정중심평가 운영 지표 또는 진단 도구를 제시한 6개의 선행연구 분석을 통해서 과정중심평가의 특징에 대한 분석 관점(수업과 평가의 통합, 평가 요소와 평가 방법, 피드백 내용과 시기, 학습자의 성장 관리)을 추출하였다. 그 분석틀을 이용하여 교육부 및 시·도 교육청 주관으로 운영한 7개 중학교의 과정중심평가 연구학교 결과 보고서를 분석하였다. 연구 결과, 수업과 평가의 통합 측면에서는 과정중심평가를 운영할 때 교육과정의 성취기준에 기반하여 수업과 평가 계획이 잘 구현되고 있었으며, 모든 보고서에서는 과정중심평가를 수행평가로 인식하고 있었다. 평가 요소와 평가 방법 측면에서는 지식에 대한 평가 요소가 주를 이루고 있고, 역량을 계획 단계에서는 제시하고 있으나 수업 실행에서는 다루지 않는 경우가 많았다. 그리고 평가 방법은 교사 중심의 관찰 평가와 보고서 평가에 치우쳐져 있고, 각 평가 요소에 대해 채점 기준의 설정이 미흡했다. 피드백 내용과 시기 측면에서 피드백은 주로 성취도 확인 측면에서 제공하였으며 학습과정에서 부족한 부분에 대한 비계를 적절한 시기에 제공한 사례는 찾지 못하였다. 학습자의 성장 관리 측면에서 과학 수업을 통해 함양된 역량은 생활기록부의 과목별 세부 특기사항에 기재하는 형태로 관리하고 있었으며, 학습자의 역량 성장 과정을 체계적으로 관리하고 평가의 결과를 교사의 수업 개선에 반영하는 내용은 보고서에 거의 나타나지 않았다.

향토성에 의한 울산덧배기춤의 형상화에 관한 연구 (A Study on its Formation of the Ulsan Dutbeki Dance: Focusing on Local Features in the Ulsan District.)

  • 최흥기
    • 공연문화연구
    • /
    • 제41호
    • /
    • pp.187-218
    • /
    • 2020
  • 덧배기는 경상도에서 풍속으로 전래된 향토춤이다. 이 연구는 울산지역의 덧배기춤이 향토성에 의해 어떻게 형상화되었는지를 고찰하였다. 그 진행으로 첫 장은 울산지역의 향토성에 의한 풍속을 지역적으로 한반도 동남부 해안지역의 풍속, 역사적으로 군사문화에서 전래된 풍속, 그리고 사회적으로 마을 동제와 들놀음에서 전래된 풍속, 울산사람들이 가진 말투와 몸짓에서 본 풍속 등에서 고찰하였다. 다음 장은 지역적 풍속에 의한 울산덧배기춤의 형상화를 환경적으로 군사 문화적인 풍속에서 무예의 숭상과 군사훈련과 연관된 울산덧배기의 형상, 지리적으로 경상도 해안지역의 특성에 의한 울산덧배기 춤의 형상, 그리고 사회적으로 울산마을축제에서 주민들의 몸짓에서 본 울산덧배기의 형상으로 고찰하였다. 이 연구에서 경상도 지역 간의 향토성과 덧배기 춤 유산의 비교는 차후 연구에서 연계한다. 연구 성과는 울산덧배기 춤의 형상화를 지역 향토성에서 전래된 풍속으로 고찰한 것이다.

Partial Sequencing and Characterization of Porcine DNA Methyltransferase I cDNA

  • Lee, Y.Y.;Kim, M.S.;Park, J.J.;H.Y. Kang;Y.M. Chang;Yoon, J.T.;K.S. Min
    • 한국발생생물학회:학술대회논문집
    • /
    • 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
    • /
    • pp.84-84
    • /
    • 2003
  • DNA methylation is involved in epigenetic processes such as X-chromosome inactivation, imprinting and silencing of transposons. DNA methylation is a highly plastic and critical component of mammalian development The DNA methyltransferases (Dnmts) are responsible for the generation of genomic methylation patterns, which lead to transcriptional silencing. The maintenance DNA methyltransferase enzyme, Dnmt 1, and the de novo methyltransferase, Dnmt3a and Dnmt3b, are indispensable for development because mice homozygous for the targeted disruption of any of these genes are not viable. The occurrence of DNA methylation is not random, and it can result in gene silencing The mechanisms underlying these processes are poorly understood. It is well established that DNA methylation and histone deacetylation operate along a common mechanistic pathway to repress transcription through the action of methyl-binding domain proteins (MBDs), which are components of, or recruit, histone deacetylase (HDAC) complexes to methylated DNA. As a basis for future studies on the role of the DNA-methyl-transferase in porcine development, we have isolated and characterized a partial cDNA coding for the porcine Dnmt1. Total RNA of testis, lung and ovary was isolated with TRlzol according to the manufacture's specifications. 5 ug of total RNA was reverse transcribed with Super Script II in the presence of porcine Dnmt 1 specific primers. Standard PCRs were performed in a total volume of 50 ul with cDNA as template. Two DNA fragmenets in different position were produced about 700bp, 1500bp and were cloned into pCR II-TOPO according to the manufacture's specification. Assembly of all sequences resulted in a cDNA from 158bp of 5'to 4861bp of 3'compare with the known human maintenance methyltransferase. Now, we are cloning the unknown Dnmt 1 region by 5'-RACE method and expression of Dnmt 1 in tissues from adult porcine animals.

  • PDF