• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.35-44
• /
• 2017

A gamma-ray peak of $^{226}Ra$ (186.2 keV) overlaps with one of $^{235}U$ (185.7 keV) in a gamma-ray spectrometry system. Though reference peaks of $^{235}U$ can be used to correct the peak interference of $^{235}U$ in the analysis of $^{226}Ra$, this requires a complicated calculation process and a high limit of quantitation. On the other hand, evaluating $^{226}Ra$ using the correction constant in the overlapped peak can make a rapid measurement of $^{226}Ra$ without the complicated calculation process as well as overcome the disadvantage in the indirect measurement of $^{214}Bi$, which means the confinement of $^{222}Rn$ gas in a sample container and a time period to recover the secular equilibrium. About 93 samples with 6 species for raw-materials and by-products were prepared to evaluate the activity of $^{226}Ra$ using the correction constant. The results were compared with the activity of $^{214}Bi$, which means the indirect measurement of $^{226}Ra$, to validate the method of the direct measurement of $^{226}Ra$ using the correction constant. The difference between the direct and indirect measurement of $^{226}Ra$ was generally below about ${\pm}20%$. However, in the case of the phospho gypsum, a large error of about 50% was found in the comparison results, which indicates the disequilibrium between $^{238}U$ and $^{226}Ra$ in the materials. Application results of the contribution ratio of $^{226}Ra$ were below about ${\pm}10%$. The direct measurement of $^{226}Ra$ using the correction constant can be an effective method for its rapid measurement of raw materials and by-products because the activity of $^{226}Ra$ can be produced with a simple calculation without the consideration of the integrity of a sample container and the time period to recover the secular equilibrium.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.4
• /
• pp.333-345
• /
• 2003

We conducted a survey on Japanese women's consciousness of food culture and their traditional food consumption by self filling-out questionnaire during January, 2000 for the period of a month, For the survey we selected 250 women residing in Kyoto, Japan. For the statistic work we used SAS package system, and t-test, $\cal{X}^2-test$ and Duncan's multiple range test were also used to verify the results significance. The purpose of this survey lies in gathering a basic data on the comparative direction of Korean and Japanese women's food culture in the future 1. Comparing the preferred food purchase place, In case of Korean women, traditional market was comparatively more preferred while Japanese women relatively preferred convenience store (p<0.001). 2. In case of Japanese women, they answered there is no difference from ordinary days on New Year's Day (71%) and Christmas (40%) while 38% answered they prepare food at home. 40% said they prepare food on parents-in-law's birthday, and 41% said no difference from ordinary days. 52% said they prepare food at home on husband's birthday. For their own birthday, 32% said yes to preparing food at home while 45% said no difference and 22.3% said eating out. For children's birthday 65% said preparing at home, 16.3% said no difference and 14.9% said eating out. 3. Comparing the conception on traditional food, Korean women answered 'complicated' (77%) most while 'simple' (5%) least, which indicates their demands for simplified recipes. In case of Japanese women, 'complicated' (44%) was most while 'scientific' (6%) was least which indicates their demands for scientific way of recipes. There were differences shown by age (p<0.001) and the older the more said 'simple' or 'logical' (p<0.01). 4. As the reason for the complicity of traditional food recipes, Koreans said 'too many hand skill' (60%) most while 'too many spices' (8%) least. For Japanese, 'various kind of the recipe' (55%) was most while 'too many hand skill' (7%) was least. There were significant differences shown by academic background (p<0.01) and income(p<0.01), and the lower the academic background, the more said 'too many spices' as the reason for the complicity in making traditional food. Generally, the lesser the income, the more tendency to say 'various kinds of the recipe'. 5. In case of Koreans, 'the recipe is difficult' (56%) was high while 'uninterested' (9%) was low in answer which showed differences by academic background (p<0.05), and in case of Japanese, 'no time to cook' (44%) was high while 'uninterested' (7%) was low. 6. The following is the reasons for choosing traditional food as a snack for children. In case of Koreans, they answered as 'traditional food' (34%), 'made from nutrious and quality materials' (27%), 'for education' (22%) and 'suites their taste' (17%) revealing 'traditional food' is highest. In case of Japanese, it was revealed in the order of 'made from nutrious and quality materials' (36.3%), 'traditional food' (25.2%), 'suites their taste' (22.6%), 'for education' (12.8%) and 7. Comparing the most important thing for the popularization of traditional food in the world, Koreans answered 'taste and nutrition' (45%) most while 'shape and color' (6%) least. In case of Japanese, 'taste and nutrition' (75%) was answered most while 'hygienic packaging' (4%) was least. Both considered 'taste and nutrition' as most important thing for the popularization of traditional food in the world. 8. In case of Koreans, they answered they learn how to make traditional food 'from mother' (47%), 'media' (18%), 'school' (15%), 'from mother-in-law' (14%), 'private cooking school' (4%) and 'close acquaintances' (2%). In case of Japanese, they said mostly learn 'from mother', but it was also shown that the lower the academic background the lesser the tendency of learning 'from mother' but 'from school' (p<0.001). 9. About the consumption of traditional fermented food, Koreans said they make kimchi (90%), pickled vegetables (39%), soy sauce (33%), bean paste (38%), salted fishery (12%) and traditional liquors (14%) at home while 67% for salted fishery and 48% for traditional liquors answered they buy rather than making at home. On the other hand, Japanese answered they mostly buy kimchi (60%), soy sauce (96%), bean paste(91%), natto(92%), salt fermented fish foods (77%) and traditional alcoholic beverage (88%) to eat. This difference was shown very distinct between Korean and Japanese women (p<0.001). 10. About the most important thing in food, Koreans answered in the order of 'liking and satisfaction' (33%), 'for health' (32%), 'for relieve hunger' (18%) and 'convenience' (17%). In case of Japanese, it was revealed in the order of 'for health' (61%), 'liking and satisfaction' (20%), 'to relieve hunger' (16%) and 'convenience' (3%). This shows that Japanese women take comparably more importance to health than Korean women. The conception of food was shown different between Korean and Japanese women (p<0.001), and Koreans showed level 4-5 of food culture while Japanese showed level 5.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.1
• /
• pp.76-83
• /
• 2001

Background : Coal workers' pneumoconiosis is a fibrotic lung disease resulting from chronic inhalation of coal dust. The precise mechanism of lung fibrosis in coal workers' pneumoconiosis is uncertain. However, a relationship between the stimulation of fibroblast proliferation and collagen production by mediators released from in flammatory and resident lung cells is thought to be a major factor. The transforming growth factor-$\beta$(TGF-$\beta$), a multifunctional cytokine and growth factor, plays a key role in the scarring and fibrotic processes due to its ability to induce extracellular matrix proteins and modulate the growth and immune function of many cell types. To determine the involvement of TGF-$\beta$ in the development of lung fibrosis in coal workers' pneumoconiosis, the TGF-${\beta}_1$ level in plasma was measured in patients with coal workers' pneumoconiosis. Methods : Plasma was collected from 40 patients with coal workers' pneumoconiosis (20 with simple coal workers' pneumoconiosis and 20 with complicated coal workers' pneumoconiosis) and from 10 normal controls. The ELISA method was used to measure the plasma TGF-${\beta}_1$ concentration. Results : Compared to the control group ($0.63{\pm}01.8$ ng/mL), there was no significant difference in the plasma TGF-${\beta}_1$ level in patients with simple coal workers' pneumoconiosis ($0.64{\pm}0.17$ ng/mL) (p>0.05). However, in patients with complicated coal workers' pneumoconiosis the plasma TGF-${\beta}_1$ level ($0.79{\pm}0.18$ ng/mL) was significantly higher than in patients with simple coal workers' pneumoconiosis and the control group (p<0.05). Conclusion : The data suggests that TGF-${\beta}_1$ has some influence in the development of lung fibrosis in coal workers' pneumoconiosis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.278-283
• /
• 2000

As information communication technology developed we could check our blood pressure, pulsation electrocardiogram, SpO2 and blood test easily at home. To check our health at ordinary times is able though interlocking the house medical instrument with the wireless public data network This service will help the inconvenience to visit the hospital everytime and will save the individual's time and cost. In each house an organism data which is detected from the human body will be transmitted to the distance hospital and will be essentially applied through wireless public data network The medical information transmit system is utilized by wireless close range network It would transmit the obtained organism signal wirelessly from the personal device to the main center system in the hospital. Remote telemetry system is embodied by utilizing wireless media access protocol. The protocol is embodied by grafting CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) protocol falling mode which is standards from IEEE 802.11. Among the house care telemetry system which could measure blood pressure, pulsation, electrocardiogram, SpO2 the study embodies the ECC(electrocardiograph) measure part. It within the ECC function into the movable device and add 900㎒ band wireless public data interface. Then the aged, the patients even anyone in the house could obtain ECG and keep, record the data. It would be essential to control those who had a health-examination heart diseases or more complicated heart diseases and to observe the latent heart disease patient continuously. To embody the medical information transmit system which is based on wireless network. It would transmit the ECG data among the organism signal data which would be utilized by wireless network modem and NCL(Native Control Language) protocol to contact through wireless network Through the SCR(Standard Context Routing) protocol in the network it will be connected to the wired host computer. The computer will check the recorded individual information and the obtained ECC data then send the correspond examination to the movable device. The study suggests the medical transmit system model utilized by the wireless public data network.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.283-296
• /
• 1997

Stomatognathic system is a complex one that is composed of TMJ, neuromuscular system, teeth and connective tissue, and all its components are doing their parts to maintain their physiological relationships. Mandible, in particular, performs various functions such as mastication, speech, and deglutition, the muscular activities that determine such functions are signalled by numerous types of proprioceptors that exist in periodontal membrane, TMJ, and muscles to be controlled by complicated pathways and mechanics of peripheral and central nervous system. Orthodontic treatment, especially when accompanied by orthognathic surgery, brings dramatic changes of stornatognat is system such as intraoral proprioceptors and muscle activities and thus, changes in patterns of mandibular function result The author tried to analyze changes in patterns of mandibular movement and physiologic activities of surrounding muscles in Skeletal Class III ortlrognathic surgery patients who presently show a great increase in numbers. The purpose of this study was to draw some objective guidelines in evaluating funclierual aspects of orthognathic surgery patients. Mandibular functional analysis using Biopak was performed for skeletal Class III prognathic patients who underwent IVRO(lntraoral Vertical Ramus Osteotmy), and the following results were obtained: 1. Resting EMG was greater in pre-surgical group than the control group, and it showed gradual decrease after the surgery. Clenching EMG of masseter and anterior temporalis of pre-surgical group was smaller than those of control group, they also increased post-surgically, and significant difference was found between pre-surgical and post-surgical(6 months) groups. 2. Resting EMG of anterior ternporalis was greater than that of all the other muscles, but there was no significant difference. Clenching EMG of anterior temporalis and masseter were greater than those of the other muscles with statistical difference. In swallowing, digastric muscle showed the highest EMG with statistical significance. 3. Limited range of mandibular movement was shown in pre-surgical group. Significant increase in maximum mouth opening was observed six months post-surgically, and significant increase in protrusive movement was observed three months post-surgically.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2011

The present survey was conducted to provide basic information on automatic milking system (AMS) in relation to purchase motive, milk yield and quality, customer satisfaction, difficulties of operation and customer suggestions, etc. Purchase motives of AMS were insufficient labor (44%), planning of dairy experience farm (25%), better performance of high yield cows (19%) and others (6%), respectively. Average cow performance after using AMS was 30.9l/d for milk yield, 3.9% for milk fat, 9,100/ml for bacterial counts. Sixty-eight percentage of respondents were very positive in response to AMS use for their successors but 18% were negative. The AMS operators were owner (44%), successor (44%), wife (6%) and company worker (6%), respectively. The most difficulty (31%) in using AMS was operating the system and complicated program manual. The rate of response to system error and breakdown was 25%. The reasons for culling cow after using AMS were mastitis (28%), reproduction failure (19%), incorrect teat placement (12%), metabolic disease (7%) and others (14%), respectively. Fifty-six percentages of the respondents made AMS maintenance contract and 44% did not. Average annual cost of the maintenance contract was 6,580,000 won. Average score for AMS satisfaction measurement (1 to 5 range) was 3.2 with decrease of labor cost 3.7, company A/S 3.6, increase of milk yield 3.2 and decrease of somatic cell count 2.8, respectively. Suggestions for the higher efficiency in using AMS were selecting cows with correct udder shape and teat placement, proper environment, capital and land, and attitude for continuous observation. Systematic consulting was highly required for AMS companies followed by low cost for AMS setup and systematization of A/S.

• Journal of Educational Research in Mathematics
• /
• v.24 no.3
• /
• pp.333-357
• /
• 2014

This study resulted from a study regarding creative STEAM System based upon an experiment with the center of gravity. The results of the study are constructed by a fusion of mathematics and physics, showing that they are the same as mathematical calculations. Also, students can find that center of gravity of an object is in equilibrium on a metal rod when the center of gravity exactly is placed on the rod. The fact that an experimental results are correspond to calculations can maximize the effectiveness of teaching. And also this study has the following effectiveness. First, the exact construction and calculations arouses good competition among students. Second, this experiment can give students a motivation for study and increase their thinking in classes because the theoretical background of center of gravity experiment is basically attributed to math and science classes in school. This study includes three different types of center-of-gravity experiments. One is a simple type of experiment in which center of gravity exists inside of an object. Another is a complicated one in which the center of gravity is also inside of an object. However, the third type is an experiment in where the center of gravity is outside of an object. Therefore, it gives students an opportunity to discuss how to confirm equilibrium on a metal rod when the object has its center of gravity outside. Having discussions in class will allow students to have a critical way of thinking. In addition, searching for a way to solve a problem will increase creativity of students as well. And the last type is finding the center of gravity of a big acrylic panel where multiple objects are on the panel. According to the survey and interview conducted by students who participated in this program, teaching based on creative STEAM system helps students to get a better understanding and more fast acquisition of knowledge. We can expect that a well-planned creative STEAM system through a continuous study will be both effective and efficient in educating critical and creative students.

• SUVANNABHUMI
• /
• v.3 no.1
• /
• pp.47-66
• /
• 2011

Malay society is rooted on the Islamic concept. That Islam influenced every corner of that Malay society which had ever been an edge of the civilizations of the Indus and Ganges. Once the letters of that Hindu religion namely Sanscrit was adopted to this Malay society for the purpose of getting the Malay language, that is, Bahasa Melayu down to the practical literation but in vain. The Sanscrit was too complicated for Malay society to imitate and put it into practice in everyday life because it was totally different type of letters which has many of the similar allographs for a sound. In the end Malay society gave it up and just used the Malay language without using any letters for herself. After a few centuries Islam entered this Malay society with taking Arabic letters. It was not merely influencing Malay cultures, but to the religious life according to wide spread of that Islam. Finally Arabic letters was to the very means that Malay language was written by. It means that Arabic letters had been used for Arabic language in former times, but it became a similar form of letters for a new language which was named as Malay language. This Arabic letters for Arabic language has no problems whereas Arabic letters for Malay language has some of it. Naturally speaking, arabic letters was not designed for any other language but just for Arabic language itself. On account of this, there occurred a few problems in writing Malay consonants, just like p, ng, g, c, ny and v. These 6 letters could never be written down in Arabic letters. Those 6 ones were never known before in trying to pronounce by Arab people. Therefore, Malay society had only to modify a few new forms of letters for these 6 letters which had frequently been found in their own Malay sounds. As a result, pa was derived from fa, nga was derived from ain, ga was derived from kaf, ca was derived from jim, nya was derived from tha or ba, and va was derived from wau itself. Where must these 6 newly modified letters be put on this Arabic keyboard? This is the very core of this working paper. As a matter of course, these 6 letters were put on the place where 6 Arabic signs which were scarecely written in Malay language. Those 6 are found when they are used only in the 'shift-key-using-letters.' These newly designed 6 letters were put instead of the original places of fatha, kasra, damma, sukun, tanween and so on. The main differences between the 2 set of 6 letters are this: 6 in Arabic orginal keyboard are only signs for Arabic letters, on the other hand 6 Malay's are real letters. In others words, 6 newly modified Malay letters were substituted for unused 6 Arabic signs in Malay keyboard. This type of newly designed Malay Jawi Script keyboard is still used in Malaysia, Brunei and some other Malay countries. But this sort of keyboard also needs to go forward to find out another way of keyboard system which is in accordance with the alphabetically ordered keyboard system. It means that alif is going to be typed for A key, and zai shall be typed when Z key is pressed. This keyboard system is called 'Malay Jawi-English Rumi matching keyboard system', even though this system should probably be inconvenient for Malay Jawi experts who are good at Arabic 'alif-ba-ta'order.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.3 s.10
• /
• pp.151-163
• /
• 2003

In this study, the algorithm of groundwater flow process was established for koreanized groundwater program development dealing with the geographic and geologic conditions of the aquifer have dynamic behaviour in groundwater flow system. All the input data settings of the 3-DFM model which is developed in this study are organized in Korean, and the model contains help function for each input data. Thus, it is designed to get detailed information about each input parameter when the mouse pointer is placed on the corresponding input parameter. This model also is designed to easily specify the geologic boundary condition for each stratum or initial head data in the work sheet. In addition, this model is designed to display boxes for input parameter writing for each analysis condition so that the setting for each parameter is not so complicated as existing MODFLOW is when steady and unsteady flow analysis are performed as well as the analysis for the characteristics of each stratum. Descriptions for input data are displayed on the right side of the window while the analysis results are displayed on the left side as well as the TXT file for this results is available to see. The model developed in this study is a numerical model using finite differential method, and the applicability of the model was examined by comparing and analyzing observed and simulated groundwater heads computed by the application of real recharge amount and the estimation of parameters. The 3-DFM model is applied in this study to Sehwa-ri, and Songdang-ri area, Jeju, Korea for analysis of groundwater flow system according to pumping, and obtained the results that the observed and computed groundwater head were almost in accordance with each other showing the range of 0.03 - 0.07 error percent. It is analyzed that the groundwater flow distributed evenly from Nopen-orum and Munseogi-orum to Wolang-bong, Yongnuni-orum, and Songja-bong through the computation of equipotentials and velocity vector using the analysis result of simulation which was performed before the pumping started in the study area. These analysis results show the accordance with MODFLOW's.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.213-226
• /
• 2011

In global supply chain, the scheduling problems of large products such as ships, airplanes, space shuttles, assembled constructions, and/or automobiles are complicated by nature. New scheduling systems are often developed in order to reduce inherent computational complexity. As a result, a problem can be decomposed into small sub-problems, problems that contain independently small scheduling systems integrating into the initial problem. As one of the authors experienced, DAS (Daewoo Shipbuilding Scheduling System) has adopted a two-layered hierarchical architecture. In the hierarchical architecture, individual scheduling systems composed of a high-level dock scheduler, DAS-ERECT and low-level assembly plant schedulers, DAS-PBS, DAS-3DS, DAS-NPS, and DAS-A7 try to search the best schedules under their own constraints. Moreover, the steep growth of communication technology and logistics enables it to introduce distributed multi-nation production plants by which different parts are produced by designated plants. Therefore vertical and lateral coordination among decomposed scheduling systems is necessary. No standard coordination mechanism of multiple scheduling systems exists, even though there are various scheduling systems existing in the area of scheduling research. Previous research regarding the coordination mechanism has mainly focused on external conversation without capacity model. Prior research has heavily focuses on agent-based coordination in the area of agent research. Yet, no scheduling domain has been developed. Previous research regarding the agent-based scheduling has paid its ample attention to internal coordination of scheduling process, a process that has not been efficient. In this study, we suggest a general framework for agent-based coordination of multiple scheduling systems in global supply chain. The purpose of this study was to design a standard coordination mechanism. To do so, we first define an individual scheduling agent responsible for their own plants and a meta-level coordination agent involved with each individual scheduling agent. We then suggest variables and values describing the individual scheduling agent and meta-level coordination agent. These variables and values are represented by Backus-Naur Form. Second, we suggest scheduling agent communication protocols for each scheduling agent topology classified into the system architectures, existence or nonexistence of coordinator, and directions of coordination. If there was a coordinating agent, an individual scheduling agent could communicate with another individual agent indirectly through the coordinator. On the other hand, if there was not any coordinating agent existing, an individual scheduling agent should communicate with another individual agent directly. To apply agent communication language specifically to the scheduling coordination domain, we had to additionally define an inner language, a language that suitably expresses scheduling coordination. A scheduling agent communication language is devised for the communication among agents independent of domain. We adopt three message layers which are ACL layer, scheduling coordination layer, and industry-specific layer. The ACL layer is a domain independent outer language layer. The scheduling coordination layer has terms necessary for scheduling coordination. The industry-specific layer expresses the industry specification. Third, in order to improve the efficiency of communication among scheduling agents and avoid possible infinite loops, we suggest a look-ahead load balancing model which supports to monitor participating agents and to analyze the status of the agents. To build the look-ahead load balancing model, the status of participating agents should be monitored. Most of all, the amount of sharing information should be considered. If complete information is collected, updating and maintenance cost of sharing information will be increasing although the frequency of communication will be decreasing. Therefore the level of detail and updating period of sharing information should be decided contingently. By means of this standard coordination mechanism, we can easily model coordination processes of multiple scheduling systems into supply chain. Finally, we apply this mechanism to shipbuilding domain and develop a prototype system which consists of a dock-scheduling agent, four assembly- plant-scheduling agents, and a meta-level coordination agent. A series of experiments using the real world data are used to empirically examine this mechanism. The results of this study show that the effect of agent-based platform on coordinated scheduling is evident in terms of the number of tardy jobs, tardiness, and makespan.