• 한국디지털건축인테리어학회논문집
• /
• 제13권2호
• /
• pp.5-16
• /
• 2013

With regard to the new town developments which have supplied lots of houses in a short period of time in Korea this study aims to evaluation and finding out problems of the developments finally to suggest the direction. A new town's competitiveness model set in the previous paper takes a role of research frame to recognize the problems and to show the direction. The model explains that new town's competitiveness is composed of 4 factors; Self-sufficiency, Innovativenss, Identity and Sustainability. Problems of the developments are as follows; incongruity of spatial structure especially in the capital region, deficiency of self-sufficiency resulted from single-use development, restriction on mixed development by a number of regulations in capital region, low business value, grand scale of land compensation, house oriented planning guidance, unfair share of infrastructure fee, and physical structure depending mainly on fossil energy. Based on this recognition this study conclusively suggests corresponding direction such as role performance as a means of urban growth management, promotion of quality of life by accumulating social capital, introduction of socially sustainable management program for the new towns, discovery and creation of town's value, reexamination of self-sufficiency's meaning or target, selective deregulation of metropolitan development, institutional strategy for cost reduction, changeover from house index to urban function oriented index, and pursuit of low-carbon green town.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.134-139
• /
• 2013

When the accident occurred in power distribution system, it needs to control efficiently the fault current according to the fault angle and location. The flux-lock type superconducting fault current limiters (SFCL) can quickly limit when the short circuit accidents occurred and be made the resistance after the fault current. The flux-lock type SFCL has a single triggering element, detects and limits the fault current at the same time regardless of the size of the fault current. However, it has a disadvantage that broken the superconductor element. If the flux-lock type SFCL has separated structure of the triggering element and the limiting element, when large fault current occurs, it can reduce the burden of power and control fault current to adjust impedance. In this paper, this system is composed by triggering element and limiting element to analyze operation of limiting current. When the fault current occurs, we analyzed the limiting and operating current characteristics of the two triggering current level, and the compensation characteristics of bus-voltage sag according to the fault angle and location.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1163-1168
• /
• 2009

The power quality of wind energy becomes more and more important in connecting wind-farms to the grid, especially weak grid. This paper presents the simulation of a wind farm of a permanent magnet synchronous generator (PMSG) and a doubly fed induction generator (DFIG). Flicker mitigation is performed by using PMSG as a static synchronous compensator (STATCOM) to regulate the voltage at the point of common coupling (PCC). A benefit of the measure is that integrating two function of to control the active power flow and to reduce the voltage flicker in a wind farm. Simulation results show that controlling PMSG is an effective and economic measure in reducing the flicker during continuous operation of grid connected wind turbines regardless of short circuit capacity ratio, turbulence intensity and grid impedance angle.

• ETRI Journal
• /
• 제38권2호
• /
• pp.217-226
• /
• 2016

We propose an architecture that reduces the power consumption and active area of such a modulator through a reduction in the number of active components and a simplification of the topology. The proposed architecture reduces the power consumption and active area by reducing the number of active components and simplifying the modulator topology. A novel second-order loop filter that uses a single operational amplifier resonator reduces the number of active elements and enhances the controllability of the transfer function. A trapezoidal-shape half-delayed return-to-zero feedback DAC eliminates the loop-delay compensation circuitry and improves pulse-delay sensitivity. These simple features of the modulator allow higher frequency operation and more design flexibility. Implemented in a 130 nm CMOS technology, the prototype modulator occupies an active area of $0.098mm^2$ and consumes 5.23 mW power from a 1.2 V supply. It achieves a dynamic range of 62 dB and a peak SNDR of 60.95 dB over a 15 MHz signal bandwidth with a sampling frequency of 780 MHz. The figure-of-merit of the modulator is 191 fJ/conversion-step.

• 항공우주기술
• /
• 제2권1호
• /
• pp.108-116
• /
• 2003

본 연구는 통신위성 전력제어장치(Power control&Distribution Unit)의 설계 및 해석에 관한 내용을 기술한다. 위성체 전력제어장치는 임무기간동안 각 서브시스템과 탑재체에 충분한 전력을 공급하여야 하며, 또한 우주환경 하에서 높은 신뢰성 및 성능이 요구된다. 전력제어 및 분배장치의 제어회로를 위해 버스전압검출 및 필터회로, 오차신호 증폭회로 그리고 SAS 및 BPC 오차신호 회로가 포함되었다. 설계된 제어보상회로에 대한 주파수 응답특성분석을 통해 각 회로의 위상여유와 이득이 분석되었다. 또한 배터리 충/방전을 위한 BPC회로 분석을 통해 배터리 충전 연속모드, 배터리 방전 연속/불연속 모드에서의 입출력 전달함수가 제시되었다.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.1-13
• /
• 2009

Photovoltaic conditioning systems normally use a maximum power point tracking (MPPT) technique to deliver the highest possible power to the load continuously when variations occur in the insolation and temperature. A unique method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter considering input capacitor. This paper aims at modeling boost converter including fairly large equivalent series resistance(ESR) of input reservoir capacitor by state-space-averaging method and PWM switch model and compares both methods using Bode plots. In the future, properly designed controller for compensation will be constructed in 3kw real system for maximum photovoltaic power tracking control.

• 한국컴퓨터정보학회논문지
• /
• 제23권3호
• /
• pp.93-100
• /
• 2018

Cyber defamation is the act of damaging the reputation of the other person on the Internet, and the act of attacking by the commenting the article through a word or blog. The reason why punishment is stronger than general contempt is that the nature of crime about defamation is worse than contempt. Also, punishment intensity is higher than defamation because the nature of cyber information spreads widely. Honor is not only a question of self-esteem or identity, but also a function that economically reduces the cost of seeking information or socially trustworthy. Through these two functions, it has been developed as a legal system to protect the honor as well as asking the legal sanction for defamation. However, although honor is used in various meanings in everyday life, the honor of legal level is understood in a more limited sense. It is because the law cannot actively lead and protect all honor feelings for one's feelings or mood occurred by hurt. However, if the social evaluation of a group or individual is undermined through a certain distortion of the truth, the law will actively intervene. However, due to the ambiguity of the legal sanctions standards and the identification of the parties involved in the defamation of cyberspace, it was difficult to solve the problems related to defamation in fact. Therefore, this paper will try to find out the problems of civil legal remedy due to the cyber defamation, and seek a solution for civil legal remedy.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.187-194
• /
• 2002

A study on machining electrode for LED (Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacturing semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on geometry of the shaped end-mill and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooling and maching error can make the electrode accurately by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.154-162
• /
• 2002

The effect of nonlinear friction in the low velocity is dominant in precise controlled mechanisms and it is difficult to model. This paper is concerned with the compensation for friction using the variable structure system approach as nonmodel based method. The problem of chattering in the sliding mode controller is suppressed by the implementation of the boundary layer concept. And the estimation for friction using sliding mode observer makes the upper bound of matched uncertainty reduced. Accordingly, the effect of chattering can be more suppressed. And the sliding surface is constructed by adding an integral component to the switching function that is made by using error dynamics. This sliding surface guarantees the good tracking performance. Experimental results for a XY table system show that the proposed method has a good performance especially in the low velocity.

• 소성∙가공
• /
• 제26권1호
• /
• pp.18-27
• /
• 2017

A comparative study was performed on strain-compensated Arrhenius-type constitutive models established with two regression methods: polynomial regression and regression Kriging. For measurements at high temperatures, experimental data of 70Cr3Mo steel were adopted from previous research. An Arrhenius-type constitutive model necessitates strain compensation for material constants to account for strain effect. To associate the material constants with strain, we first evaluated them at a set of discrete strains, then capitalized on surrogate modeling to represent the material constants as a function of strain. As a result, disparate flow stress models were formed via the two different regression methods. The constructed constitutive models were examined systematically against measured flow stresses by validation methods. The predicted material constants were found to be quite accurate compared to the actual material constants. However, notable mismatches between measured and predicted flow stresses were revealed by the proposed validation techniques, which carry out validation with not the entire, but a single tensile test case.