• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.11
• /
• pp.54-63
• /
• 1997

The 1-D finite-element mehtod is applied for designing double-clad otpical fibers with dispersion-compensation capability. design parameters allowing only a $LP_{01}$ single mode are treated and macro-bending loss are taken into consideration. Design parameters are extracted to have the compensation ratio $(L_{SMF}/L_{DCF})$ of 6.2 for core structure with step-index profile, and of 5.2 for core with triangular-index profile.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.55.3-55.3
• /
• 2017

We present the preliminary result of our Lagrangian perturbation theory for the large-scale structure formation, in the presence of the cold dark matter (CDM) and the baryonic fluid. In the linear order, two mutually independent pseudo-particles can describe the evolution of density fluctuations and the accuracy of the calculation is better than the 4-mode (growing, decaying, streaming, compensated) Eulerian linear perturbation theory. In the $2^{nd}$ order, the separability of pseudo-particles is not as straightforward as in the linear order, and the related difficulty in developing the $2^{nd}$ order theory will also be presented.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.444-453
• /
• 1992

이 논문은 스텝게이지와 마이크로 컴퓨터를 이용하여 온라인으로 3차원좌표측정기의 오차를 보정하는 시스템에 관한 것이다. 이때 사용하는 스텝게이지는 미리 교정을 실시하여 그 교정데이타를 컴퓨터상에 저장하고 있다. 측정기의 작업영역안에서 어떠한 방향으로 스텝게이지가 놓여 있어도 초기점을 지정하면 CNC타입의 코드를 자동으로 생성하여 스텝게이지 측정을 실시하며 그 측정결과는 3차원 좌표측정기의 오차를 보정하는데 사용된다. 결과적으로 경제적이고 실용적인 오차보정 시스템을 구현할 수 있다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.13-18
• /
• 1998

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this paper, the methodology of freeform surface generation using measured data on the machine tool is presented. The reliability of measured points data is obtained by measuring error compensation. The compensated data are formulated through Non-uniform G-spline surface modeling. In order to improve the surface fairness, the generated model si smoothened by parameterization The validity and usefulness of the proposed method are examined through computer simulation and experiments on the machine tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.412-417
• /
• 1992

In this paper, we present a method to design a coupled autopilot for STT missiles which have severe aerodynamic cross-coupling. The aerodynamic model is derived in the meneuver plane and, based on that model, an autopilot scheduled by the normal acceleration and the estimated bank angle is designed. Bank angle is obtained by a simple estimator. With the proposed autopilot, it is shown by computer simulations that induced moments are properly compensated and the performance is supiorior to the conventional autopilot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.636-643
• /
• 1998

This paper is presents multivariable control scheme for industrial robot manipulators. The control scheme consists of two loops. The modeling error between linearized robot model and actual robot model is compensated in error compensation loop. The PID control loop is designed for pole assignment to stability of robot system and utilized for trajectory tracking. Alternatively computer simulation results are given for illustration purpose of suggested controller.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.809-815
• /
• 2007

This paper proposes the analysis on new equipment for power quality in electrified railway. The proposed equipment consists of series and parallel inverter. Each inverter is connected by capacitor as dc link. This structure can be compensated for active and reactive power in catenary through transformer.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2014

In this paper we discussed Euler-Maruyama method for stochastic differential equations with jump diffusion. We give a convergence result for Euler-Maruyama where the coefficients of the stochastic differential equation are locally Lipschitz and the pth moments of the exact and numerical solution are bounded for some p > 2.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.66-74
• /
• 1994

A loop-shaping LQ controller is synthesized for tandem cold mills. And a new loop- shaping technique is suggested for LQ controller design. The suggested loop-shaping LQ control system is compared with the standard loop-shaping LQ control system. The simulation results show that the theickness and interstand tension control accuracy of tandem cold mills can be improved by the compensated loop-shaping LQ controller.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.135-140
• /
• 2010

We propose a variational wave function for the ground state of the magnetic heavy fermion (HF) systems, in which both the Kondo and the RKKY interactions are variationally incorporated and the local f-orbital state exists as a linear combination of a full local moment state and a fully compensated state (mixed wave state). We describe the mechanism for the mixed wave ground state based on the large-N treatment of the Kondo lattice Hamiltonian added with RKKY interaction. With the mixed wave ground state we can explain several puzzling experiments in magnetic HF compounds such as a small value of local moment, coexistence of the antiferromagnetic (AFM) and the paramagnetic (PM) phases, local quantum criticality, etc.