• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.54.1-54.1
• /
• 2015

We report results of investigation of amplitude calibration for very long baseline interferometry (VLBI) observations with Korean VLBI Network (KVN). Amplitude correction factors are estimated based on comparison of KVN observations at 22 GHz correlated by Daejeon hardware correlator and DiFX software correlator in Korea Astronomy and Space Science Institue (KASI) with Very Long Baseline Array (VLBA) observations at 22 GHz by DiFX software correlator in National Radio Astronomy Observatory (NRAO). We used the observations for compact radio sources, 3C 454.3 and NRAO 512 which are almost unresolved for baselines in a range of 350-477 km. VLBA visibility data of the sources observed with similar baselines as KVN are selected, fringe-fitted, calibrated, and compared in their amplitudes. We found that visibility amplitudes of KVN observations should be corrected by factors of 1.14 and 1.40 when correlated by DiFX and Daejeon correlators, respectively. These correction factors are attributed to the combination of two steps of 2-bit quantization in KVN observing systems and characteristics of Daejeon correlator.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.275-285
• /
• 2012

In this study, we present preliminary results of precise orbit determination (POD) using satellite laser ranging (SLR) observations for International Laser Ranging Service (ILRS) Associate Analysis Center (AAC). Using SLR normal point observations of LAGEOS-1, LAGEOS-2, ETALON-1, and ETALON-2, the NASA/GSFC GEODYN II software are utilized for POD. Weekly-based orbit determination strategy is applied to process SLR observations and the post-fit residuals check, and external orbit comparison are performed for orbit accuracy assessment. The root mean square (RMS) value of differences between observations and computations after final iteration of estimation process is used for post-fit residuals check. The result of ILRS consolidated prediction format (CPF) is used for external orbit comparison. Additionally, we performed the precision analysis of each ILRS station by post-fit residuals. The post-fit residuals results show that the precisions of the orbits of LAGEOS-1 and LAGEOS-2 are 0.9 and 1.3 cm, and those of ETALON-1 and ETALON-2 are 2.5 and 1.9 cm, respectively. The orbit assessment results by ILRS CPF show that the radial accuracies of LAGEOS-1 and LAGEOS-2 are 4.0 cm and 5.3 cm, and the radial accuracies of ETALON-1 and ETALON-2 are 30.7 cm and 7.2 cm. These results of station precision analysis confirm that the result of this study is reasonable to have implications as preliminary results for administrating ILRS AAC.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.125-134
• /
• 2003

Standard estimation methods for linear mixed models are sensitive to influential observations. However, tools and concepts for linear mixed model diagnostics are rudimentary until now and research is heavily demanded in linear mixed models. In this paper, we consider two diagnostics to evaluate the effects of individual observations in the estimation of fixed effects for linear mixed models. Those are Cook's distance and COVRATIO. Results of our limited simulation study suggest that the Cook's distance is not good statistical quantity in linear mixed models. Also calibration point for COVRATIO seems to be quite conservative.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.35.4-35.4
• /
• 2019

Understanding the interplay between galaxies and dark matter in the universe is one of key challenges in modern astrophysics. This provides an important test of structure formation scenarios and cosmological models. I discuss three aspects of this test: (1) comparing the matter distribution from galaxy redshift surveys with that from weak-lensing surveys, (2) statistical comparison of large-scale structures between observations and cosmological simulations, and (3) multi-wavelength study of galaxies. These tests underscore the importance of combining photometric and spectroscopic surveys in observations along with cosmological simulations for exploring and understanding the structure formation.

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.759-774
• /
• 2006

We employed two data assimilation techniques including MM5 Four Dimensional Data Asssimilation (FDDA) and Local Analysis and Prediction System (LAPS) to find out the effects of the changed inetial conditions on the wind fields simulation according to the objective analysis methods. We designed 5 different modeling cases. EXP B used no data assimilation system. Both EXP Fl using surface observations and EXP F2 with surface and upper-air observations employed MM5 FDDA. EXP Ll using surface observations and EXP L2 with surface and upper-air observations used LAPS. As results of, simulated wind fields using MM5 FDDA showed locally characterized wind features due to objective analysis techniques in FDDA which is forcefully interpolating simulated results into observations. EXP Fl represented a large difference in comparison of wind speed with EXP B. In case of LAPS, simulated horizontal distribution of wind fields showed a good agreement with the patterns of initial condition and EXP Ll showed comparably lesser effects of data assimilation of surface observations than EXP Fl. When upper-air observations are applied to the simulations, while MM5 FDDA could hardly have important effects on the wind fields simulation and showed little differences with simulations with merely surface observations (EXP Fl), LAPS played a key role in simulating wind fields accurately and it could contribute to alleviate the over-estimated winds in EXP Ll simulations.

• The Bulletin of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.39.2-39.2
• /
• 2005

• Atmosphere
• /
• v.26 no.4
• /
• pp.523-540
• /
• 2016

The effects of satellite observations on large-scale atmospheric circulations in the reanalysis data are investigated by comparing the latest Japanese Meteorological Association's reanalysis data (JRA-55) and its family data, JRA-55 Conventional (JRA-55C). The latter is identical to the former except that satellite observations are excluded during the data assimilation process. Only conventional datasets are assimilated in JRA-55C. A simple comparison revealed a considerable difference in temperature and zonal wind fields in both the stratosphere and troposphere. Such differences are particularly large in the Southern Hemisphere and whole stratosphere where conventional ground-based measurements are limited. The effects of satellite observations on the zonal-mean tropospheric circulations are further examined in terms of the Hadley cell, eddy-driven jet, and mid-latitude storm tracks. In both hemispheres, JRA-55C exhibits slightly weaker and narrower Hadley cell than JRA-55. This is consistent with a weaker diabatic heating in JRA-55C. The eddy-driven jet shows a small difference in its latitudinal location only in the Southern Hemisphere. Likewise, while the Northern-Hemisphere storm tracks are quantitatively similar in the two datasets, Southern-Hemisphere storm tracks are relatively weaker in JRA-55C than in JRA-55. Their difference is comparable to the uncertainty between reanalysis datasets, indicating that satellite data assimilation could yield significant corrections in the zonal-mean circulation in the Southern Hemisphere.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.73-73
• /
• 2014

Several geometrical models (e.g., cone and flux rope models) have been suggested to infer 3-D parameters of CMEs using multi-view observations (STEREO/SECCHI) and single-view observations (SOHO/LASCO). To prepare for when only single view observations are available, we have made a test whether the cone model parameters from single-view observations are consistent with those from multi-view ones. For this test, we select 35 CMEs which are identified as CMEs, whose angular widths are larger than 180 degrees, by one spacecraft and as limb CMEs by the other ones. For this we use SOHO/LASCO and STEREO/SECCHI data during the period from 2010 December to 2011 July when two spacecraft were separated by $90{\pm}10$ degrees. In this study, we compare 3-D parameters of these CMEs from three different methods: (1) a triangulation method using the STEREO/SECCHI and SOHO/LASCO data, (2) a Graduated Cylindrical Shell (GCS) flux rope model using the STEREO/SECCHI data, and (3) an ice cream cone model using the SOHO/LASCO data. The parameters used for comparison are radial velocities, angular widths and source location (angle ${\gamma}$ between the propagation direction and the plan of the sky). We find that the radial velocities and the ${\gamma}$-values from three methods are well correlated with one another (CC > 0.8). However, angular widths from the three methods are somewhat different. The correlation coefficients are relatively not good (CC > 0.4). We also find that the correlation coefficients between the locations from the three methods and the active region locations are larger than 0.9, implying that most of the CMEs are radially ejected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.849-853
• /
• 2005

Signal detectors often utilize nonlinear statistics of observations rather than the observation as they are. The sign statistic, a typical example of the nonlinear statistics, for example, relies oかy on the sign information of observations. In this letter, a qualitative analysis is presented that the correlation coefficients between the statistics and original observations can be used to predict the asymptotic performance of a detection schemes utilizing the nonlinear statistics.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.113-114
• /
• 2015

Recent high-resolution, high-sensitivity observations of protostellar jets have shown many to possess an underlying 'wiggle' structure. HH 211 is one such example where recent sub-mm observations revealed a clear reflection-symmetric wiggle. An explanation for this is that the HH211 jet source is moving as part of a protobinary system. Here we test this assumption by simulating HH211 through 3D hydrodynamic simulations using the pluto code with a molecular chemistry and cooling module, and initial conditions based on an analytical model derived from SMA observations. Molecular chemistry allows us to accurately plot synthetic molecular emission maps and position-velocity diagrams for direct comparison to observations, enabling us to test the observational assumptions and put constraints on the physical parameters of HH211. Our preliminary results show that the reflection-symmetric wiggle can be recreated through the assumption of a jet source being part of a binary system.