• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.17-24
• /
• 2023

A post-processing technique for the measurement signal of a solenoid-type sensor is introduced. The solenoid-type sensor nondestructively evaluates an external tendon of prestressed concrete using the total flux leakage (TFL) method. The TFL solenoid sensor consists of primary and secondary coils. AC electricity, with the shape of a sinusoidal function, is input in the primary coil. The signal proportional to the differential of the input is induced in the secondary coil. Because the amplitude of the induced signal is proportional to the cross-sectional area of the tendon, sectional loss of the tendon caused by ruptures or corrosion can be identified by the induced signal. Therefore, it is important to extract amplitude information from the measurement signal of the TFL sensor. Previously, the amplitude was extracted using local maxima, which is the simplest way to obtain amplitude information. However, because the sampling rate is dramatically decreased by amplitude extraction using the local maxima, the previous method places many restrictions on the direction of TFL sensor development, such as applying additional signal processing and/or artificial intelligence. Meanwhile, the proposed method uses amplitude demodulation to obtain the signal amplitude from the TFL sensor, and the sampling rate of the amplitude information is same to the raw TFL sensor data. The proposed method using amplitude demodulation provides ample freedom for development by eliminating restrictions on the first coil input frequency of the TFL sensor and the speed of applying the sensor to external tension. It also maintains a high measurement sampling rate, providing advantages for utilizing additional signal processing or artificial intelligence. The proposed method was validated through experiments, and the advantages were verified through comparison with the previous method. For example, in this study the amplitudes extracted by amplitude demodulation provided a sampling rate 100 times greater than those of the previous method. There may be differences depending on the given situation and specific equipment settings; however, in most cases, extracting amplitude information using amplitude demodulation yields more satisfactory results than previous methods.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.57-70
• /
• 2009

Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.120-129
• /
• 2023

To evaluate the vertical loads on railway bridges, conventional load tests are typically conducted. However, these tests often entail significant costs and procedural challenges. Railway conditions involve nearly identical load profiles due to standardized rail systems, which may appear straightforward in terms of load conditions. Nevertheless, this study aims to validate load tests conducted under operational train conditions by comparing the results with those obtained from conventional load tests. Additionally, static and dynamic structural behaviors are extracted from the measurement data for evaluation. To ensure the reliability of load testing, this research demonstrates feasibility through comparisons of existing measurement data with sensor attachment locations, train speeds, responses between different rail lines, tendency analysis, selection of impact coefficients, and analysis of natural frequencies. This study applies to the Dongho Railway Bridge and verifies the applicability of the proposed method. Ten operational trains and 44 sensors were deployed on the bridge to measure deformations and deflections during load test intervals, which were then compared with theoretical values. The analysis results indicate good symmetry and overlap of loads, as well as a favorable comparison between static and dynamic load test results. The maximum measured impact coefficient (0.092) was found to be lower than the theoretical impact coefficient (0.327), and the impact influence from live loads was deemed acceptable. The measured natural frequencies approximated the theoretical values, with an average of 2.393Hz compared to the calculated value of 2.415Hz. Based on these results, this paper demonstrates that for evaluating vertical loads, it is possible to measure deformations and deflections of truss railway bridges through load tests under operational train conditions without traffic control, enabling the calculation of response factors for stress adjustments.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.147-163
• /
• 2022

The relocation policy of public Institutions throughout provincial areas that implemented for the purpose of "balanced national development" finished in 2019 with the last relocation of the Korea Institute of Science & Technology Evaluation and Planning, which moved to Chungbuk Innovation City. Electric power public corporations also completed relocation program over eight regions across the nation. This study was conducted empirically to identify the structural relationship between the public service motivation and job attitude. In this, the relationship of organizational change, particularly occurred by the regional relocation, with the psychological state of these organization members (experienced direct changes and got substantial impacts in various aspects such as psychological, economic and living environment, etc.,) was studied. This study aims to seek early organizational stabilization ideas for electric power public corporations after relocation, and to present some implications that can contribute to the secondary relocation of public institutions to local areas. This study shows the statistically significant relationship between the psychological state occurred by relocation and organizational commitment. The result shows that the higher the expectation levels, the higher the degree of organizational commitment, while anxious psychological state has no relation with that. Additionally, expectation level has no significant functional relation with turnover intention. Followings are the major conclusions revealed in this study; The stronger the anxious psychological state, the higher the turnover inducement goes up. The higher the expectation levels, the higher the public service motivation grows, and the higher the anxiety psychological state, the public service motivation lowers. The organizational commitment grows according to the public service motivation proportionally, but the turnover inducement intention is weak. The moderating effect of public service motivation between the expectation of organizational change and turnover intention was not significant, but it was analyzed that the moderating effect of public service motivation formed a significant relationship with other anxiety psychology. The expectation levels of employees of electric power public corporations has grown up after moving to provincial areas. Relationship between the expectation mind and the turnover inducement has decreased after local relocation.

• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.1
• /
• pp.5-30
• /
• 2024

The purpose of this study is to extract topics from experimental data using the topic modeling methods(LDA, Top2Vec, and BERTopic) and compare the characteristics and differences between these models. The experimental data consist of 55,442 papers published in 85 academic journals in the field of library and information science, which are indexed in the Web of Science(WoS). The experimental process was as follows: The first topic modeling results were obtained using the default parameters for each model, and the second topic modeling results were obtained by setting the same optimal number of topics for each model. In the first stage of topic modeling, LDA, Top2Vec, and BERTopic models generated significantly different numbers of topics(100, 350, and 550, respectively). Top2Vec and BERTopic models seemed to divide the topics approximately three to five times more finely than the LDA model. There were substantial differences among the models in terms of the average and standard deviation of documents per topic. The LDA model assigned many documents to a relatively small number of topics, while the BERTopic model showed the opposite trend. In the second stage of topic modeling, generating the same 25 topics for all models, the Top2Vec model tended to assign more documents on average per topic and showed small deviations between topics, resulting in even distribution of the 25 topics. When comparing the creation of similar topics between models, LDA and Top2Vec models generated 18 similar topics(72%) out of 25. This high percentage suggests that the Top2Vec model is more similar to the LDA model. For a more comprehensive comparison analysis, expert evaluation is necessary to determine whether the documents assigned to each topic in the topic modeling results are thematically accurate.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.365-378
• /
• 2020

Purpose This study was performed to determine whether the T1 relaxation time of gadoxetic acid-enhanced liver MR imaging is useful for detecting and staging liver fibrosis in patients with chronic liver disease. Materials and Methods One hundred and three patients with suspected focal liver lesion underwent MR imaging and Fibroscan. Fibroscan was chosen as the reference standard for classifying liver fibrosis. T1 relaxation times were acquired before (preT1), 20 minutes after (postT1) contrast administration, and reduction rate of T1 relaxation time (rrT1) on transverse 3D VIBE (volumetric interpolated breath-hold examination) sequence using 3T MR imaging. The optimal cut-off values for the fibrosis staging were determined with ROC analysis. Results PreT1 and postT1 increased and rrT1 decreased constantly with increasing severity of liver fibrosis according to the METAVIR score (F0-F4). There were statistically significant differences between F2 and F3 in preT1 (F2, 836.0 ± 74.7 ms; F3, 888.6 ± 77.5 ms, p < 0.05) and between F3 and F4 in postT1 (F3, 309.0 ± 80.2 ms; F4, 406.6 ± 147.7 ms, p < 0.05) and rrT1 (F3, 65.4 ± 7.7%; F4, 57.3 ± 11.4%, p < 0.05). ROC analysis revealed that combination test (preT1 + postT1) was the best test for predicting liver fibrosis. Conclusion PreT1 and postT1 increased constantly with increasing severity of liver fibrosis. T1 mapping in gadoxetic acid-enhanced liver MR imaging could be a helpful complementary sequence to determine the liver fibrosis stage.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.35-43
• /
• 2024

Numerous methods have been applied to assess the antibacterial effectiveness of hand hygiene products. However, the different results obtained through various evaluation methods have complicated our understanding of the real efficacy of the products. Few studies have compared test methods for assessing the efficacy of hand hygiene products. In particular, reports on ex vivo pig skin testing are limited. This study aimed to compare and characterize the methodologies applied for evaluating hand hygiene products, involving in vitro, ex vivo, and in vivo approaches, applicable to both leave-on sanitizers and wash-off products. Our further aim was to enhance the reliability of ex vivo test protocols by identifying influential factors. We performed an in vitro method (EN1276) and an in vivo test (EN1499 and ASTM2755) with at least 20 participants, against Serratia marcescens or Escherichia coli and Staphylococcus aureus. For the ex vivo experiment, we used pig skin squares prepared in the same way as those used in the in vivo test method and determined the optimal treated sample volumes for sanitizers and the amount of water required to wash off the product. The hand sanitizers showed at least a 5-log reduction in bacterial load in the in vitro test, while they showed little antibacterial activity in the in vivo and ex vivo tests, particularly those with a low alcohol content. For the hand wash products, the in vitro test was limited because of bubble formation or the high viscosity of the products and it showed low antibacterial activity of less than a 1-log reduction against E. coli. In contrast, significantly higher log reductions were observed in ex vivo and in vivo tests, consistently demonstrating these results across the two methods. Our findings revealed that the ex vivo and in vivo tests reflect the two different antibacterial mechanisms of leave-on and wash-off products. Our proposed optimized ex vivo test was more rapid and more precise than the in vitro test to evaluate antibacterial results.

• Food Science and Preservation
• /
• v.31 no.3
• /
• pp.474-485
• /
• 2024

The purposes of this study were to isolate the potential Lacticaseibacillus spp. from the feces of infants before weaning, to investigate the safety of antibiotics resistance and beta-haemolysis, and to evaluate the anti-bacterial and anti-inflammatory effects between the selected strains and Oenanthe javanica (Oj) fermented by them. As a result of analyzing the intestinal microbial community among the stools of four infants, the genus Bifidobacterium was the most dominant, but Lacticaseibacillus (L.) rhamnosus was the most frequently isolated because of the easy culture. Nine test strains, including Lactobacillus rhamnosus LGG (ATCC 53103) as the positive control, were sensitive against 8 kinds of antibiotics without vancomycin in comparison with the cut-off values at the European Food Safety Authority (EFSA), and there was no hemolysis. In the antibacterial activity experiment, the Lacticaseibacillus rhamnosus L22-FR28 (L28, KACC 92513P) strain and Oj+L28 ferment showed significantly (p<0.05) higher activities than LGG against Bacillus cereus and Staphylococcus aureus. Additionally, these decreased the activity of the NF-kB/AP-1 transcription factor and inhibited the nitric oxide and cytokines (TNF-α and IL-6) produced in macrophage RAW cells stimulated by lipopolysaccharide (LPS). Consequently, the L. rhamnosus L28 strain and Oenanthe javanica+L. rhamnosus L28 (Oj+L28) ferment selected with the high anti-inflammatory effect will improve health functionality after more research, such as the verification of animal level and identification of mechanism on an anti-inflammatory.

• Journal of Korea Port Economic Association
• /
• v.40 no.2
• /
• pp.21-38
• /
• 2024

The current situation of ports and related industries is transitioning from quantitative growth in increased cargo volume and expansion of port facilities to qualitative growth in the role of ports through the creation of high value-added. Ports are now recognized as playing an important role in economic growth and development by generating high value-added, not just by increasing the amount of cargo and expanding port facilities. This study evaluated the importance of factors affecting the improvement of the Busan Port's marine equipment industry by using the Analytic Hierarchy Process(AHP) to derive the priority of improvement measures by factor and evaluate the importance of factors affecting the marine equipment industry. The factors that should be considered when selecting improvement measures for the marine equipment industry were selected as four factors: strengthening price competitiveness, increasing government and local government interest, strengthening promotion, and establishing a global network. The main sub-factors were composed of eight detailed evaluation factors by selecting two factors for each layer. The analysis was designed by dividing the factor hierarchy for selecting improvement measures for the marine equipment industry into three levels and creating survey questions for pairwise comparison. The priority of the analysis results using AHP showed that the factor with the highest priority was strengthening price competitiveness, followed by increasing government and local government interest, establishing a global network, and strengthening promotion. According to the analysis results for the second-level sub-factors, among the factors for strengthening price competitiveness, low distribution costs and storage costs were considered most important, followed by avoiding excessive competition among marine equipment companies. Among the factors for increasing government and local government interest, improving customs procedures and tariff refund procedures were considered most important, followed by strengthening incentives from the government and Busan City. Among the factors for establishing a global network, promoting large-scale marine equipment companies was considered most important, followed by actively participating in international marine equipment-related associations. Among the factors for strengthening promotion, active use of the Internet was considered most important, followed by holding domestic and international exhibitions. Based on this study, we hope to help activate Busan Port's market by enhancing its competitiveness through revitalizing its marine equipment industry, generating water traffic, and creating new value-added.