• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1150-1155
• /
• 2006

In a heating control system, the indoor temperature controller transfers temperature signals inputed from the temperature sensor and the user to the valve controller. The valve controller recieves these signals then the valve controller controls the valve driving motor on two position control and controls the indoor temperature. When setting up a new valve driving motor from a long distance it is necessary to set up a new valve controller. But occasionary, due to construction, it is impossible to wire between the existing valve controller and the new valve controller. In this situation, the new and existing valve controllers can communicate via power line communication. In this paper it is proposed heating control system controls on two position control via power line communication.

• 제어로봇시스템학회논문지
• /
• 제7권2호
• /
• pp.102-108
• /
• 2001

In this paper, an active noise controller for a communication headset was designed. In a communication headset, there exist information signals such as voices from the end for the communication line as well as also, undesirable noises with are induced by external noise sources such as engine noises. Therefore, it is necessary to reduce the external noises for clear hearing of the communication signals. This problem was solved by robust H(sub)$\infty$ controller to reduce noise and a compensator for information signals The designed controller was implemented using TMS320C31 DSP Op-amp, and several experiments were performed to verify its performance. The results showed that the controller reduces the undesirable noises sufficiently, while communication signals are not reduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.91-93
• /
• 2007

This paper presents multi-PI controller of IPMSM drive using fuzzy and neural-network. In general, PI controller in computer numerically controlled machine process fixed gain. To increase the robustness, fred gain PI controller, Multi-PI controller proposes a new method based fuzzy and neural-network. Multi-PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국ITS학회 논문지
• /
• 제18권6호
• /
• pp.43-59
• /
• 2019

현재 국내에서 사용되고 있는 교통신호제어기는 220V의 고전압을 신호등에 일대일로 직접 전달하는 스위치 제어 방식이다. 이러한 방식은 교통신호제어기와 신호등들을 연결하는 데 상대적으로 많은 케이블이 소요되고, 또한 감전에 대한 우려가 있다. 이에 따라 도로교통공단에서는 경찰청 교통신호제어기 표준규격서에 디지털 통신 방식을 이용한 디지털 교통신호제어기의 규격을 추가하였다. 본 연구에서는 이러한 표준규격서를 바탕으로 디지털 교통신호제어기를 개발하고자 하였다. 또한 디지털 교통신호제어기와 아날로그 교통신호제어기가 혼재되어 있어도 현재 운영 중인 신호제어시스템에서 운영이 가능함을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.53-55
• /
• 2006

This paper presents self tuning PI controller of IPMSM drive using neural network. NNPI controller is developed to minimize overshoot, rise time and settling time following sudden parameter changes such as speed, load torque and inertia. Also, this paper is proposed speed control of IPMSM using neural network and estimation of speed using artificial neural network(ANN) controller. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.88-90
• /
• 2007

This paper is proposed high performance speed control using AFNN controller. The design of the speed controller based on adaptive fuzzy-neural networks(AFNN) controller that is implemented using fuzzy control and neural networks. The control performance of the AFNN controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.582-588
• /
• 2001

The Multiple Model/Controller IMC(MMC-IMC) is a model-based control method which uses a set of model/controller pairs rather than a single model/controller to handle all possible operating conditions in the IMC control structure. During operation, one model/controller pair that best fit, for current plant situation is chosen by the switching algorithm. The major drawback of the switching controller is the bad transient performance due to the model error and the use fo linear controller for nonlinear plants. In this paper, we propose a method that transient response of the MMC-IMC using two recurrent neural networks. Simulation result shows that the proposed method represents better performance than the usual MMC-IMC`s.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1459-1461
• /
• 2005

This paper is proposed an efficiency optimization control algorithm for a synchronous reluctance motor which minimizes the copper and iron losses. The design of the speed controller based on fuzzy-neural networks(FNN) controller that is implemented using fuzzy control and neural networks. The control performance of the adaptive FNN controller is evaluated by analysis for various operating conditions. Simulation results are presented to show the validity of the proposed algorithm

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1453-1455
• /
• 2005

This paper presents self tuning PI controller of IPMSM drive using neural network. Self tuning PI controller is developed to minimize overshoot, rise time and settling time following sudden parameter changes such as speed, load torque and inertia. Also, this paper is proposed speed control of IPMSM using neural network and estimation of speed using artificial neural network(ANN) controller. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.583-585
• /
• 1999

This paper presents the controller of multiple DC motors using the network. This controller has been built with 16-bits one chip microprocessor (87C196CA) which includes the integrated CAN serial communication and position control for two motors. Since only one microprocessor is needed, the proposed controller is not only cost effective but also powerful. The system is composed of one main controller, trajectory planner, and the other sub controller, position controller. The main controller which has been built using Visual Basic programming on the Pentium PC, generates the trajectory and then transmits it to the sub controller. The trajectory transmitted from the PC will be processed by the sub controller. Two motors are controlled using the conventional position control, PID, to reach them the same target position but with different velocities at the same time. The communications between the main controller and sub controller is performed through the RS-232 or the CAN communication The CAN would be safer and faster than serial communication network since it has non-destructive bitwise arbitration specification. In this paper, we consider the CAN communications generally and then show the usefulness of the proposed controller by demonstrating position control of two DC motors.