• 한국대기환경학회지
• /
• 제30권5호
• /
• pp.411-422
• /
• 2014

In this study, spatial and temporal variations of radiative forcing (RF) and mean temperature changes due to greenhouse gases ($CO_2$, $CH_4$, and $N_2O$) emitted from commercial aircraft were examined based on the simplified expression at the airports in Korea during 2009~2010. The radiative transfer model (SBDART) was used to compare with the RF and mean temperature changes calculated from the simplified expressions for greenhouse gas $CO_2$. The RF simulated by the SBDART was about 67% higher than that of the simplified expression, on average. The highest mean RF (up to $9.0mW/m^2$ for $CO_2$) and mean temperature changes (up to $9.7{\times}10^{-5}^{\circ}K/day$ for $CO_2$) for all GHGs occurred at Ulsan airport during the study period, whereas the lowest RF and temperature changes at Yangyang (for $CO_2$) and Sacheon airports (for $CH_4$ and $N_2O$). In the case of $CH_4$ and $N_2O$, their effects to the RF and mean temperature change were negligible compared to $CO_2$.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.113-124
• /
• 2012

Reliable estimation of energy load inside the greenhouse and the selection of cooling and heating facilities are very important preceding factors to save energy as well as initial and maintenance costs of operating a greenhouse. Recently, building energy simulation (BES) technique to simulate a model similar to the actual conditions through a variety of dynamic simulation methods, and predict and analyze the flow of energy is being actively introduced and developed. As a fundamental research to apply the BES technique which is mainly used for analysis of general buildings, to greenhouse, this research designed four types of naturally-ventilated greenhouses using one of commercial programs, TRNSYS, and then compared and analyzed their energy load properties, by applying meteorological data collected from six regions in Korea. When comparing the greenhouse load of each region depending on latitude and topographical characteristics through simulation, Chuncheon had nearly 9~49 % higher heating load per year than other regions, but its annual cooling load was the reverse to it. Except for Jeju, 1-2W type greenhouses in five regions showed about 17 % higher heating load than a widespan type greenhouse, and 1-2W type greenhouses in Chuncheon, Suwon, Cheongju, Daegu, Cheonju and Jeju had 23 %, 20 %, 17 %, 16 %, 18 % and 20 % higher cooling load respectively than a wide span-type one. Glasshouse and vinyl greenhouse showed 8~11 % and 10~12 % differences respectively in heating load, while 2~10 % and 7~10 % differences in cooling load respectively.

• 생물환경조절학회지
• /
• 제20권2호
• /
• pp.72-77
• /
• 2011

본 연구는 국내 상업용 온실 피복재의 관류열전달계수를 산정히는데 필요한 기초자료를 제공하기 위하여 최근 국내에 많이 보급되어 사용되고 있는 플라스틱필름으로 피복된 온실에 대해 관류열량을 측정하고 관류열전달계수의 변화를 분석하였으며 그 결과를 요약하면 다음과 같다. 온실 내외부 온도차에 따른 관류열전달계수의 변화를 분석한 결과 피복의 층수에 따라 안정된 관류열전달계수를 나타내게 되는 온실 내외부 온도차의 값이 다르게 나타났기 때문에 온실 피복재에 대한 관류열전달계수를 결정할 때에는 피복층수별로 안정된 값을 나타내는 온실 내외부 온도차 범위에서의 관류열전달계수를 채택하여야할 것이다. 온도차이에 따른 관류열전달계수의 변화 경향은 기존의 연구결과와 잘 일치하였으나 안정된 값을 나타내는 온도차이의 구체적인 값은 다르게 나타났기 때문에 이에 대한 추가적인 연구가 필요할 것으로 판단된다. 풍속에 따른 관류열전달계수의 증가율은 연구자에 따라 많은 차이가 있음을 알 수 있었으며, 이중피복온실이나 커튼을 설치한 온실과 같이 보온성을 높인 온실은 일중피복온실에 비해 풍속에 따른 관류열 손실이 더 작다는 사실을 확인할 수 있었다. 관류열전달계수의 기존 연구결과들을 분석한 결과 연구자에 따라 값이 차이가 있었기 때문에 국내 온실의 정확한 난방부하량을 산정하는데 필요한 적절한 관류열전달계수를 제시하기 위해서는 우선 측정을 위한 표준화된 환경기준이 마련될 필요가 있으며, 또한 국내에서 실제로 사용되고 있는 주요 피복재별로 구체적인 관류열전달계수가 구해져야 할 것이다.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.492-500
• /
• 2019

본 연구에서는 $9.2MW_e$의 상용규모 순환유동층 보일러에서 화학첨가제 사용에 따른 미세입자 저감에 대한 영향을 확인하였다. 또한 화력 발전소에서 화석연료의 연소 중 발생하는 미세입자를 포집하기 위하여 간단하고 효과적인 포집설비를 개발하였다. 연소 배가스 중 PM 10이하의 입자를 감소시키기 위하여 화학첨가제를 사용하였으며, 사용한 화학첨가제는 borax solution을 사용하였다. 포집된 미세입자 중 PM 10이하의 입자 거동을 확인하기 위하여 입도분석기와 SEM 분석을 통해 확인하였다. Borax solution은 배가스중에 용융된 미네랄을 흡수하여 미세입자를 성장시키는 경향이 있는 것을 알 수 있었다. 결과적으로 borax solution을 사용함으로써 $10{\mu}m$ 이하의 미세입자가 감소되었음을 확인할 수 있었다.

• Asian Journal of Atmospheric Environment
• /
• 제8권1호
• /
• pp.48-58
• /
• 2014

Energy efficiency is vital to improve energy security, environmental and social sustainability, and economic performance. Improved energy efficiency also mitigates climate change by lowering greenhouse gas (GHG) emissions. Buildings are the single largest industrial consumer of energy and are therefore key to understanding and analyzing energy consumption patterns and the opportunities for saving energy at the district level in urban environments. This study focused on two representative boroughs in the major metropolitan area of Seoul, South Korea as a case study: Gandong-gu, a typical residential district, and Jung-gu, a typical commercial district. The sources of the energy supplied to the boroughs were determined and consumption patterns in different industry sectors in Seoul used to identify current patterns of energy consumption. The study analyzed the energy consumption patterns for five different building categories and four different sectors in the building using a bottom-up energy modeling approach. Electricity and gas consumption patterns were recorded for different building categories and monthly ambient temperatures in the two boroughs. Finally, a logarithmic equation was developed to describe the correlation between commercial activity and cooling energy intensity in Jung-gu, the commercial district. Based on these results, recommendations are made regarding the current energy consumption patterns at the district level and government energy policies are suggested to reduce energy consumption and, hence, greenhouse gas emissions, in both commercial and residential buildings.

• Journal of Ginseng Research
• /
• 제29권4호
• /
• pp.182-184
• /
• 2005

A new cultural practice for commercial production of American ginseng by organically grown in a shaded greenhouse under controlled environment conditions has been developed. This new procedure will shorten the dormant period and reduce the cultivation period from 4 years in conventionally grown ginseng to 2 years.

• Journal of Biosystems Engineering
• /
• 제37권4호
• /
• pp.245-251
• /
• 2012

Purpose: Provision of accurate temperature measurement is an essential element to ensure a precise control in greenhouse environment. This study was organized to compare the effects of six solar radiation shields with different shapes for temperature measurement and find the most appropriate shield for greenhouse environment. Methods: A fan-aspirated radiation shield was designed and manufactured. Using the fan-aspirated radiation shield and five other shapes i.e., the cup shape, horizontal pipe, vertical pipe, parallel boards and commercial shields, temperature measurement was conducted over the lawn surface as well as greenhouse indoor environment. The measurement height varied at 0.5, 1.0 and 1.5 m from the floor. Results: The measured temperatures by the fan-aspirated radiation shield were 1.30-$1.49^{\circ}C$ lower than the values recorded by other different-shaped shields at 1.5 m of measurement height. As the measurement height decreases, observed differences between measured temperatures of the fan-aspirated radiation shield and other shields demonstrate a declining trend. However, at low measurement heights, the radiation emitted from the bottom surface would be the source of error in temperature measurement. Conclusions: The fan-aspirated radiation shield is a required tool for exact measurement of air temperature in greenhouse temperature control.

• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.444-452
• /
• 2011

In this study the characteristics of natural ventilation of Venlo-type greenhouse with continuous roof vents were analyzed using commercial computational fluid dynamics (CFD) code. Developed CFD simulation model was verified by comparison with experimental data. Simulation errors were 1.9-46.0% for air velocity and 1.7-11.2% for air temperature at each measurement point. CFD simulations were conducted to estimate the effect of roof vents opening direction, opening angle, outside wind velocity and wind directions on ventilation rate and climate condition in greenhouse. The results of this study showed that ventilation rate of the present greenhouse was increased linearly in proportion to the increase of roof vent opening angle and outside wind velocity over 2.0 m/s. According to the analysis on the effects of different roof vent opening direction, simultaneous opening of wind and leeward vents showed the highest ventilation rate and lowest mean temperature in greenhouse.

• Current Research on Agriculture and Life Sciences
• /
• 제30권1호
• /
• pp.27-33
• /
• 2012

본 연구는 우리나라 플라스틱온실 피복재의 피복방법 및 관리방법을 개선할 수 있는 방안을 구명하는데 필요한 자료를 제공하기 위하여 상업용으로 운영되고 있는 대표적인 구조 및 피복형태의 온실에 대하여 겨울철 온실 내부의 광합성유효광량자속을 측정하고 변화를 분석하였으며 결과를 요약하면 다음과 같다. 일일적산 광합성유효광량자속의 월중 변화를 분석한 결과 모든 온실에 있어서 광량변화의 경향이 일조시간의 변화 경향과 대체로 잘 일치하는 것으로 나타났으나, 온실 간에 일일적산 광량의 차이는 상당히 큰 것으로 나타났으며, 겨울철에는 모든 온실이 토마토 생육에 필요한 적정 광량에 미치지 못하는 것으로 나타났다. 월평균 일일적산 광합성유효광량자속의 연중변화를 분석한 결과 실험온실 모두 투과광량을 높이기 위하여 겨울철에도 내부피복재를 대부분 개방하였기 때문에 내부피복재의 오염으로 인한 광투과율의 저하는 미미하였으며 주로 외부피복재의 오염으로 인해 투과광량이 감소하는 것으로 분석되었다. PO필름으로 피복된 단동온실의 광 투과 성능이 매우 우수하다는 사실을 확인할 수 있었다. 피복재를 더 효율적으로 사용하기 위해서는 피복재의 교체시기를 겨울철광량이 부족한 시기가 시작되기 전인 10월 또는 11월경으로 하는 것이 바람직할 것으로 판단되었다. 온실간 광량의 차이가 최대 40%정도까지 나기 때문에 투과광량이 낮은 온실은 즉시 피복재를 교체하여 광투과율을 높이는 것이 경제적일 것으로 판단되었다. 온실의 투과광량 감소요인을 분석한 결과 투과광량을 감소시키는 내부요인은 보온커튼, 내부피복재, 결로받이 등인 것으로 분석되었다. 광폭형 단동온실의 경우에는 비교적 넓은 온실 폭의 중앙에 보온커튼과 내부피복재를 걷어 두고 있기 때문에 온실 전체 폭에 비해 걷혀 있는 보온커튼과 내부피복재의 폭이 비교적 작아 다른 온실에 비해 광 손실이 상대적으로 적을 것으로 분석되었다. 종합적으로 비교해 볼 때 광폭형 단동온실이 광 투과 측면에서 가장 우수한 것으로 나타났고 내부피복재를 중앙에서 권취하여 개방하는 형태의 온실이 가장 바람직하지 못한 것으로 분석되었다.

• 한국대기환경학회지
• /
• 제29권3호
• /
• pp.287-296
• /
• 2013

To decompose carbon dioxide, which is a representative greenhouse gas, a plasma torch was designed and manufactured. To examine the characteristics of carbon dioxide decomposition via plasma discharge, a case wherein pure carbon dioxide was supplied and a case wherein methane and/or $TiCl_4$ were injected as additives were investigated and compared. The carbon dioxide and methane conversion rate, energy decomposition efficiency, produced gas concentration, carbon monoxide and hydrogen selectivity, carbon-black and $TiO_2$ were also investigated. The maximum carbon dioxide conversion rate was 28.9% when pure carbon dioxide was supplied; 44.6% when $TiCl_4$ was injected as am additive; and 100% percent when methane was injected as an additive. Therefore, this could be explained that the methane injection showed the highest carbon dioxide decomposition. Furthermore, the carbon-black and $TiO_2$ were compared with each commercial materials through XRD and SEM. It was found that the carbon-black that was produced in this study is similar for commercial materials. It was found that the $TiO_2$ that was produced in this study is suitable for photocatalyst and pigment because it has mixed anataze and rutile.