• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.570-575
• /
• 2008

Flows are studied to understand the flow structure in the narrow region that any experimental approaches are hard to access, Effects on the vehicle commodities from the flows are anticipated in the point of aerodynamics and aero-acoustics. PowerFLOW, which was well validated commercial software, was used to simulate the flow field in the small region, for example, the inner region of the fender panel, the inner region around the front door and the inner region of the trunk lid. Flows in the narrow region could be origins of door sealing problem and dust piling problem.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.123-129
• /
• 2007

A 2-step process for the safe destruction of chemical wafare agents(agent hydrolysis followed by supercritical water oxidation) was studied to obtain kinetic data for the pilot plant design. This process is simple to operate by using commercial equipments and could be applied as an alternative technology to incineration. Sarin(GB) and sulfur mustard(HD) were hydrolysed in sodium hydroxide and water respectively and their hydrolysates and OPA, which is binary agent for GB were oxidized in a continuous flow supercritical water oxidation system. Destruction efficiencies of the materials were above 99.99% in supercritical water.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.237-240
• /
• 2004

For the paralleled operation of DC/DC converters, the current sharing between each modules is the most important for the reliability of the power system. Interleaving method is commonly used with many paralleling schemes for the reduction of the ripple in the output voltage of paralleled converters and there are many commercial IC for interleaving application appliable. But for all of them, it is impossible to detect the number of module in operating and then change the phase of them automatically. In this paper, a novel paralleling method is proposed for the converter parallel operation, which detects the number of modules in active and sets the phases of PWM signals applied to each modules autonomously. This can greatly improve the output voltage ripple and reliability of the system. The expandibility of modular number can be done very easily by just adding several parts.

• Korean Journal of Organic Agriculture
• /
• v.12 no.3
• /
• pp.249-264
• /
• 2004

High yield arable and crop farming demands a temporally and quantitatively determined application of plant nutrients according to field and culture. The nutrients may come from commercial fertilizers or from animal wastes. Regarding the dangers to soil, water and air, which come from current agricultural application measures for nitrogen, a sectoral approach for a nonpolluting liquid manure utilization can-not be used ally longer. An integrated system approach has to be found, leading to a drastic improvement of nutrient utilization and hence to a considerably reduced nutrient use. This can be only expected, if the organic manure can be applicated at times, when losses through leaching and volatilization can be minimized.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.99-103
• /
• 1962

The usefulness of a propionylated paper chromatography to the identification of various insoluble organic antioxidants in rubber vulcanizates was studied. Purified commercial antioxidants and commercially mixed antioxidants could be identified by the propionylated paper chromatography. Antioxidants were identified by the propionylated paper chromatography from acetone extract of pure gum vulcanizates, which were either unaged or aged in Geer-Oven. The $R_f$ values from acetone extracts of vulcanizates were a little lower than those purified samples, but the colours and shapes of the spots support the identification. No spot could be obtained by the method from the aged vulcanizate containing antioxidant 200 (2,6 Di-tert-butyl-p-cresol). This indicates that the antioxidant was converted or decomposed to other compound after aging. It was concluded from the above results that the propionylated paper chromatography is useful to identify the antioxidants from vulcanizates and presents a key for elucidating the mechanism of the inhibition.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.157-160
• /
• 2010

Management of indoor air quality of underground subway station is an important issue since the limited natural ventilation, limited sunshine incoming, and highly moistured atmosphere. The improvement in IAQ of platform is expected because most stations were installed with platform screen door currently, however, the poor air quality in tunnel might be affecting subway cabin indoor. In this study, we developed the air quality assessment model based on computational fluid dynamics. The geometry of air ventilation unit, seat, LCD monitors, and passengers were modeled using commercial software (Design Modeler) and fluid pattern and pollutants trajectories were analyzed by using CFX. We predicted the thermal comfort by predicted mean vote (PMV), distribution of CO2 and PM10 concentration. It is expected that this model can be used for the performance test of air cleaners which are under development.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.415-419
• /
• 2008

In this study, analysis of water mist behavior is performed using numerical simulation. Water mist is characterized by the droplet flow which is one of the multiphase flows and is discrete fluid droplets in continuous air. It is important to choose the proper diameter of droplet-size and the distance between the fire location and the position of water mist because it depends on the buoyancy from fire. Therefore the behavior of water mist with fire should be simulated by FLUENT, a commercial computational fluid dynamics(CFD) program, with Lagrangian discrete phase model. (DPM)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.635-641
• /
• 2011

In ultrasonic testing of dissimilar metal welds, application of phased array technique in terms of incident beam focusing is not easy because of complicated material structures formed during the multi-pass welding process. Time reversal(TR) techniques can overcome some limitations of phased array since they are self-focusing that does not depend on the geometrical and physical properties of testing components. In this paper, we test the possibility of TR focusing on a defect within anisotropic, heterogeneous austenitic welds. A commercial simulation software is employed for TR focusing and imaging of a side-drilled hole. The performance of time reversed adaptive focal law is compared with those of calculated focal laws for both anisotropic and isotropic welds.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.132-136
• /
• 2005

It is widely accepted that the reading mechanism of Super-RENS(super-resolution near field structure) and Super-ROM(super-resolution read only memory) is closely related with non-linear temperature dependent material properties such as refractive indices, phase change. Furthermore, the dynamic change of the temperature distribution also an essential part of reading mechanism of Super-RENS/ROM. Therefore, the knowledge of the temperature distribution as a function a time is one of the important keys to reveal the physics of reading mechanism in Super-RENS/ROM. We calculated time-dependent temperature distribution in a 3-dimensional Super-ROM disk structure when moving laser beam is irradiated. With a help of commercial software FEMLAB which employed finite element method, we simulated the temperature distribution of ROM structure whose pit diameter is 120-nm with 50-nm depth. Energy absorption by moving laser irradiation, time variations of heat transfer processes, heat fluxes, heat transfer ratios, and temperature distributions of the complicate 3-dimensional ROM structure have been obtained.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.52-57
• /
• 2009

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, lead, zinc, aluminum, nickel and magnesium in this article. Domestic demand and production in recent years and current status on the recycling of the scraps of these non-ferrous metals are introduced briefly here.