• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1045-1054
• /
• 2002

Urban atmospheric conditions are usually settled as warmer, drier and dirtier than those of rural counterpart owing to reduction of green space and water space area heat retention in surfaces such as concrete and asphalt, and abundant fuel consumption. The characteristics of urban climate has become generally known as urban heat island. The purpose of this study is to investigate the temporal and spatial distribution of the heat emission from human activity, which is a main factor causing urban heat island. In this study, the anthropogenic heat fluxes emitted from vehicles and constructions are estimated by computational grid mesh which is divided by 1km $\times$ 1km. The anthropogenic heat flux by grid mesh can be applied to a numerical simulation model of the local circulation model. The constructions are classified into 9 energy-consumption types - hospital, hotel, office, department store, commercial store, school, factory, detached house and flat. The vehicles classified into 4 energy-consumption types - car, taxi, truck and bus. The seasonal mean of anthropogenic heat flux around central Daegu exceeded $50 W/m^2$ in winter. The annual mean anthropogenic heat flux exceeded $20 W/m^2$. The values are nearly equivalent to the anthropogenic heat flux in the suburbs of Tokyo, Japan.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.505-517
• /
• 2016

The structural integrity of a dual-purpose metal cask currently under development by the Korea Radioactive Waste Agency (KORAD) was evaluated, through numerical simulations and a model test, under high-speed missile impact reflecting targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from literature. In the impact scenario, a missile flying horizontally hits the top side of the cask, which is freestanding on a concrete pad, with a velocity of 150 m/s. A simplified missile simulating a commercial aircraft engine was designed from an impact loade-time function available in literature. In the analyses, the dynamic behavior of the metal cask and the integrity of the containment boundary were assessed. The simulation results were compared with the test results for a 1:3 scale model. Although the dynamic behavior of the cask in the model test did not match exactly with the prediction from the numerical simulation, other structural responses, such as the acceleration and strain history during the impact, showed very good agreement. Moreover, the containment function of the cask survived the missile impact as expected from the numerical simulation. Thus, the procedure and methodology adopted in the structural numerical analyses were successfully validated.

• Advances in concrete construction
• /
• v.7 no.2
• /
• pp.65-74
• /
• 2019

This paper reports on the results of a parametric study, which examines the effects of varying aspect ratios on the dynamic response of cylindrical silos directly supported on the ground under earthquake loading. Previous research has shown that numerical models can provide considerably realistic simulations when it comes to the behavior of silos by using correct boundary conditions, appropriate element types and material models. To this end, a three dimensional numerical model, taking into account the bulk material-silo wall interaction, was produced by the ANSYS commercial program, which is in turn based on the finite element method. The results obtained from the numerical analysis are discussed comparatively in terms of dynamic material pressure, horizontal displacement, equivalent base shear force and equivalent bending moment responses for considered aspect ratios. The effects experienced because of the slenderness of the silo in regards to the seismic response were evaluated along with the effectiveness of the classification system proposed by Eurocode in evaluating the loads on the vertical walls. Results clearly show that slenderness directly affects the seismic response of such structures especially in terms of behavior and the magnitude of the responses. Furthermore the aspect ratio value of 2.0, given as a behavioral changing limit in the technical literature, can be used as a valid limit for seismic behavior.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.4
• /
• pp.89-98
• /
• 2022

The recent earthquake in Korea caused a lot of damage to reinforced concrete (RC) columns with non-seismic details. The nonlinear analysis enables predicting the hysteresis behavior of RC columns under earthquakes, but the analytical model used for the columns must be accurate and practical. This paper studied the nonlinear analysis models built into a commercial structural analysis program for the existing RC columns. The load-displacement relationships, maximum strength, initial stiffness, and energy dissipation predicted by the three analysis models were compared and analyzed. The results were similar to those tested in the order of the fiber, Pivot, and Takeda models, whereas the fiber model took the most time to build. For columns subjected to axial load, the Pivot model could predict the behavior at a similar level to that of the fiber model. Based on the above, it is expected that the Pivot model can be applied most practically for existing RC columns.

• Steel and Composite Structures
• /
• v.48 no.2
• /
• pp.131-143
• /
• 2023

The CFRP bar was used to achieve more ductile and durable headed-stud shear connectors in composite components. Three series of push-out tests were firstly conducted, including specimens reinforced with pure steel fibers, steel and CFRP bars. The distributed stress was measured by the commercial PPP-BOTDA (Pre-Pump-Pulse Brillouin optical time domain analysis) optical fiber sensor with high spatial resolution. A series of numerical analyses using non-linear FE models were also made to study the shear force transfer mechanism and crack response based on the test results. Test results show that the CFRP bar increases the shear strength and stiffness of the large diameter headed-stud shear connection, and it has equivalent reinforcing effects on the stud shear capacity as the commonly used steel bar. The embedded CFRP bar can also largely improve the shear force transfer mechanism and decrease the tensile stress in the transverse direction. The parametric study shows that low content steel fibers could delay the crack initiation of slab around the large diameter stud, and the CFRP bar with normal elastic modulus and the standard reinforcement ratio has good resistance to splitting crack growth in headed stud shear connectors.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.47-56
• /
• 2004

To determine the pure bond strength between substrate and its overlayed concrete material, a direct pull-off test method was introduced by using a bi-material cylinder with which a penny-shaped crack was mountained at its interface. First, to evaluate the stress magnification or concentration at the interface, the energy release rates of a penny-shaped interface crack in remote tension loading on a bi-material cylinder were determined in terms of different modulus ratios and undonded area ratios(crack ratios) using a commercial finite element program. Then the energy release rates were calibrated as non-dimensional values in consideration of structural dimensions and applied forces. And to evaluate whether this new pull-off test method gives sound test results, three different sizes of unbended area ratios were incorporated along their interface in bi-material cylinders(sulphur polymer concrete + old concrete). Test results showed that all specimens were broken off at their interfaces as intended. Also the FEM analyses and test results indicated that a bi-material specimen with unbended area ratio of 0.4$\sim$0.6 is suitable for best accurate testing.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.114-120
• /
• 2007

Two feeding experiments were conducted to evaluate the effects of the experimental extruded pellet (EP), commercial EP and raw fish-based moist pellet (MP) on growth of growing flounder (Paralichthys olivaceus). In experiment 1, two replicate groups of the fish (average body weight of $115{\pm}3.2\;g$) were fed one of five experimental diets (EP1-EP5) and MP in circular concrete tanks (4.6 m $\phi$, 0.6 m depth) for 78 days. In experiment 2, in order to evaluate EP in the commercial scale ($8\;m\;{\times}\;8\;m$), flounder (average body weight of $137{\pm}11.4\;g$) were fed one of five EPs (EP1-EP5) used in experiment 1, commercial EP (EP6) and two MEPs (MEP4 and MEP6) as moist pellet types which were made from EP4 and EP6, respectively, by being sprayed with a mixture of water and additives for 80 days. In experiment 1, weight gain of fish fed the all EPs was not significantly different from that of MP. Feed efficiency of fish fed the EP4 was highest, and protein efficiency ratio of fish fed the EP4 and EP5 was significantly higher than that of fish fed the MP (P<0.05). Significant differences were observed in the contents of moisture and crude lipid in the muscle, and moisture in the liver of fish (P<0.05). In experiment 2, weight gain of fish fed the EP4 and MEP4 were highest and feed efficiency showed high tendency in EP4, MEP4 and MEP6. Fish fed the MEP6 showed higher weight gain and feed efficiency compared to those of fish fed the EP6, but there was no difference in those of fish fed EP4 and MEP4. Based on the results of this study, dietary formulations used in EPs could be most recommendable applied in the practical extruded pellet feeds for flounder grown from 114 g to 350 g.

• Journal of Arbitration Studies
• /
• v.20 no.3
• /
• pp.25-46
• /
• 2010

In spite of great interest and recent innovation of the legislative system in the Arbitration and other Alternative Dispute Resolution(ADR) system, In Japan there have been only a few case in which International commercial dispute was settled through the Arbitration compared to other countries. However, we can easily expect that foreign arbitral awards which need to be recognized and enforced in Japan will gradually increase and this makes it very important for us to review the Japanese legislative system regarding recognition and enforcement of foreign arbitral awards. In this paper, I focused on the relations between applicable laws(including convention) regarding recognition and enforcement of foreign arbitral awards in Japan and some issues concerning refusal of recognition and enforcement of foreign arbitral awards. Japan is a member state of several multilateral conventions concerning recognition and enforcement of foreign arbitral awards including the New York Convention of 1958 and at least 20 bilateral agreements which include provisions in relate to the recognition and enforcement of arbitral awards. Therefore there are some legal issues about the priority application between multilateral and bilateral agreements in relate to Article 7(1) of the New York Convention. In Japan, as I mentioned in this paper, there are incoherent opinions concerning this issue. To solve it substantially it would seem appropriate to build up concrete and explicit provisions concerning the application of priority between multilateral and bilateral agreements. On the other hand, in relate to the application between the New York Convention and National Law, it is necessary to take general approach regarding the priority application between Convention (Treaty) and National Law, considering the national application of conventions under the Constitutional System of each country. Among the grounds for non-recognition/enforcement, there are the ones that are decided under the law of the requested country, for instance, arbitrability and public policy. It would therefore be possible that some foreign arbitral awards would not be recognized in Japan especially relating to the arbitrability because its scope in Japan is not so large. Regarding the enforcement of awards annulled in their place of origin, some positive opinions in recent Japanese legal discussions, say that annulled awards should be enforced as a counter strategy of developed countries and judiciary discretion of the requested country would be needed. As mentioned in this paper, the recognition and enforcement of foreign arbitral awards is closely related to judicial policy of the requested country as the recognition and enforcement of foreign judgment is. Even though there existed uniform rules on recognition and enforcement of foreign arbitral awards like the New York convention, each country has different internal legal status of conventions under its own Constitutional System and tends to interpret the provisions based in its own profit. Therefore, it is necessary to review, in the light of conflict of laws, the national legislative system including legal status of conventions of the requested countries concerning recognition and enforcement of foreign arbitral awards.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.241-250
• /
• 2009

This study was conducted to develop an prototype automatic feeder (AF) for growing-finishing pigs. The main components of AF were a feed storage hopper, a feeding motor, a feed agitator, a control box and a programmable IC, which were controlled by a personal computer. The powder type feed transfer rate of AF was average $9.83{\pm}0.4\;g\;s^{-1}$. In feeding test, growing pigs (Landrace) of about 43 kg live weight were used in the study, and was fed over a 6 weeks in pens with solid concrete floors. For feeding trials with AF, the operation time of the feeding motor was set to 2, 3, 4, 5, and 6 seconds per feeding. Pigs frequently used AF from 05:00 to 11:00 and from 11:00 to 17:00 without relationship to the operation time of the feeding motor. The AF operation time of the feeding motor to minimize feed loss was between 2 and 4 seconds. Pigs fed with AF had same or slightly higher average daily gam (0.8~0.9 kg) than that with a commercial feeder, and average daily feed intake (2.76~2.93 kg) and feed conversion ratio (3.10~3.66) of pigs fed with AF were same or lower than those with the commercial feeder except the operation time of the feeding motor set to 6 seconds. As a result, AF would help to use and improve the productivity of growing-finishing pigs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.144-148
• /
• 1999

This study was conducted to test actual oxygen consumption rates of Nile tilapia (Oreochromis niloticus) at a commercial scale high density culture tank in the recirculating culture system, with a special emphasis on the oxygen consumption rate of this species with different daily feeding frequencies. Nile tilapia, an average of 400 g and a total wright of 390 kg, were stocked in a circular concrete tank of 2.9 m in diameter and 0.8 m in depth, in a recirculating culture system. The fish were fed commercial diet 1, 2, 5, and 9 times per day between 09:00 h and 19:00 h. feed was evenly supplied where the fish were fed more than once a day. Dissolved oxygen of influent and effluent water was monitored every 50 seconds by a computer with electrodes for 24 hours. The standard metabolic rate of tilapia was $39.31{\pm}4.4mg\;O_2/kg$ fish/hr in the present study. The maximum oxygen consumption was reached between 30 to 50 minutes after feeding. The maximum oxygen consumption levels of 1, 2, 5, and 9 feeding times per day were 161.2, 123.4, 111.1 and 111.1 mg $O_2/kg$ fish/hr, respectively. While the mean oxygen consumption levels of 1, 2, 5, and 9 feeding times per day were $79.9{\pm}21.5,\;81.3{\pm}14.8,\;84.2{\pm}9,9$ and $98,9{\pm}11.0mg\;O_2/kg$ fish/hr, respectively. These results show that oxygen consumption rates are not much different between the feeding frequencies. These results could be used to design to provide desirable oxygen supply system in the recirculating high-density tilapia culture system.