• 한국분무공학회지
• /
• 제21권3호
• /
• pp.144-154
• /
• 2016

This review will be concentrated on the spray characteristics of biobutanol and its blends fuels in internal combustion engines including compression ignition, spark ignition and gas turbine engines. Butanol can be produced by fermentation from sucrose-containing feedstocks, starchy materials and lignocellulosic biomass. Among four isomers of butanol, n-butanol and iso-butanol has been used in CI and SI engines. This is due to higher octane rating and lower water solubility of both butanol compared with other isomers. The researches on the spray characteristics of neat butanol can be classified into the application to CI and SI engines, particularly GDI engine. Two empirical correlations for the prediction of spray angle for butanol as a function of Reynolds number was newly suggested. However, the applicability for the suggested empirical correlation is not yet proved. The butanol blended fuels used for the investigation of spray characteristics includes butanol-biodiesel blend, butanol-gasoline blend, butano-jet A blend and butanol-other fuel blends. Three blends such as butanol/ethanol, butanol/heptane and butanol/heavy fuel oil blends are included in butanol-other fuel blends. Even though combustion and emission characteristics of butanol/diesel fuel blend in CI engines were broadly investigated, study on spray characteristics of butanol/diesel fuel blend could not be found in the literature. In addition, the more study on the spray characteristics of butanol /gasoline blend is required.

• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.430-438
• /
• 2008

Siberian spruce, found in the northern temperature and boreal regions of the earth, is usable biomass as fuels. In this study, parameters of thermochemical degradation by pyrolysis-liquefaction reaction of siberian spruce such as the effect of reaction temperature, reaction time and degradation products and energy yields were investigated. The liquid products from pyrolysis-liquefaction of siberian spruce contained various kinds of cyclicketones, cresols, dimethyl phenols and benzenediols. Combustion heating value of liquid products from pyrolysis-liquefaction conversion processes was in the range of $7,650{\sim}7,800cal/g$. The energy yield in pyrolysis-liquefaction of siberian spruce was as high as 69.5% after 40min of reaction at $400^{\circ}C$. The liquid products from the thermochemical conversion of siberian spruce could be used as high octane value fuels and fuel additives.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.55-63
• /
• 2009

In this study, thermochemical degradation by acetone solvolysis reaction of siberian spruce wood was investigated for a temperature range of $200{\sim}400^{\circ}C$. The liquid products by acetone solvolysis from siberian spruce wood produced various kinds of aliphatics, cyclic compounds and aromatics included phenols etc. Combustion heating value of liquid products by acetone solvolysis conversion processes was in the range of $8,010{\sim}8,180cal/g$. The energy yield in acetone solvolysis of siberian spruce wood was as high as 74.2% after 40min of reaction at $400^{\circ}C$. The liquid products from the thermochemical conversion of siberian spruce wood could be used as high-octane-value fuels and fuel additives.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.44-49
• /
• 2001

Reduced chemical kinetics mechanism has been derived, which can be applicable for autoignition model of hydrocarbon fuels, and contains 23 reactions and 18 species. The present model is validated with the experimental data, where the ignition delays of several hydrocarbon fuels, such as n-heptane, i-octane, n-decane and DME(dimethylether) are measured as equivalence ratios are varied. Especially, the effects of different fuels on ignition delays can be explained by changing the rate constants of three reactions among the present model. As a result, the proposed model can be applicable to two stage ignition model of Diesel combustion.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.1-9
• /
• 1999

Liquid Petroleum Gas (LPG) has been widely used for commercial light-duty vehicles worldwide. Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline , it becomes more popular fuel for reducing exhaust emissions. In tihs study, mathematical models of air intake and fuel delivery system are presented, and a PI-controller is designed for air-fuel ratio control. Hardware and software of an engine control module (ECM) are designed for an LPG engine. The ECM is built using a Motorola MC68HC05. In order to control the air-fuel ratio at stoichiometry, the PI-control algorithm is implemented in the ECM. The experiment results show the proto LPG ECM and its control scheme perform well to meet the stoichiometric air-duel ratio requirement.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.30-35
• /
• 1999

Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.517-520
• /
• 2001

Fossil fuels such as coal and crude oil contain various organic sulfur compounds. Combustion of these fuels emit sulfur oxides which are considered as msjor air pollutants causing acid rain problem. Among various organic sulfur compounds, aromatic sulfur compounds of thiophenes which constitute major sulfur fractions of heavy oils are not easily removed by hydrodesulfurization. Many peroxidase and hemoproteins are known to oxidize dibenzothiophene (DBT) to dibenzothiophene-sulfoxide(DBT - sulfoxide) then dibenzothiophene- sulfone (DBT-sulfone). The oxidation of DBT by the immobilized hemoproteins in n-octane was increased significantly when the hemoproteins were deposited on celites of the particle size between 0.75 - 1.0 mm and a conventional substrates. such as t-butyl hydroperoxide and cumene hydroperoxide. In anhydrous organic solvents with log P values larger than 4.0 DBT was completely oxidized by cumene hydroperoxide catalyzed by cytochrome c deposited on celites.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.178-185
• /
• 1998

To reduce the particulate matter and nitrogen oxides from diesel engine, many studies are proceeding and being accomplished practically. In this situation CNG engine has important meaning both as a clean fuel and an alternative energy. In order to present the direction and application of CNG, we simulated various operating conditions, that is, spark timing, compression ratio and fuel composition etc. Thus we try to understand how those affect performance and exhaust characteristics. The simulation program results found that the optimum combustion start angle was 21$^{\circ}$ at 1800rpm and fuel composition affects performance and emissions, also we could understand the formation of emission as crank angle is changed.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.23-30
• /
• 2010

Trends of the automotive market require the application of new engine technologies, which allows for the use of different types of fuel. Since ethanol is a renewable source of energy and it contributes to lower $CO_2$ emissions, ethanol produced from biomass is expected to increase in use as an alternative fuel. It is recognized that for spark ignition (SI) engines ethanol has advantages of high octane number and high combustion speed. In spite of the advantages of ethanol, fuel supply system might be affected by fuel blends with ethanol like a wear and corrosion of electric fuel pumps. So the on-board hydrogen production out of ethanol reforming can be considered as an alternative plan. This paper investigates the influence of ethanol fuel on SI engine performance, thermal efficiency and emissions. The results obtained from experiments have shown that specific fuel consumption has increased by increasing ethanol amount in the blend whereas decreased by the use of hydrogen-enriched gas. The combustion characteristics with hydrogen-enriched gaseous fuel from ethanol reforming are also examined.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.451-464
• /
• 2014

본 연구에서는 HCCI엔진의 과급조건에서 EGR의 영향에 대하여 수치해석적인 방법으로 연구하였다. 수치해석은 CHEMKIN-PRO에 있는 single-zone model을 사용하였고 연료로는 N-heptnae, Iso-octane 그리고 PRF50을 사용하였다. 사용된 연료의 화학반응 매커니즘과 열역학적 변수들은 Lawrence Livermore National Laboratory(LLNL)의 모델을 사용하였다. 연소상의 변화는 열효율에 큰 영향을 미치게 되므로 이영향을 배제하기 위해 본 연구에서는 CA50을 $365^{\circ}CA$($5^{\circ}CA$ aTDC)로 일정하게 고정하였다. 연구결과 EGR의 영향으로 줄어든 산소의 영향에 의해 저온산화반응과 NTC, 고온산화반응이 모두 약화되고 열발생률이 감소하는 것을 확인할 수 있었다. 과급과 EGR을 함께 사용하게 되면 과급에 의해 증가한 산소량과 연료의 영향으로 인해 연소가 강화되어 저온산화반응, NTC, 고온산화반응이 강화되고 열 발생률이 증가하는 것을 확인할 수 있었다. EGR만을 사용하는 경우 IMEP가 감소하는 경향을 나타내지만 과급과 EGR을 함께 사용하는 경우 과급의 영향으로 인해 IMEP가 크게 증가하여 낮은 압력상승률과 높은 출력을 함께 얻을 수 있는 것을 확인하였다.