• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.469-477
• /
• 2007

Most multimedia source coders exhibit unequal bit error sensitivity. Efficient transmission system design should therefore incorporate the use of matching unequal error protection (UEP). In this paper, we present and evaluate a flexible space-time coding system with unequal error protection. Multiple transmit and receive antennas and bit-interleaved coded modulation techniques are used combined with rate compatible punctured convolutional codes. A near optimum iterative receiver is employed with a multiple-in multiple-out inverse mapper and a MAP decoder as component decoders. We illustrate how the UEP system gain can be achieved either as a power or bandwidth gain compared to the equal error protection system (EEP) for the identical source and equal overall quality for both the UEP and EEP systems. An example with two/three transmit and two receive antennas using BPSK modulation is given for the block fading channel.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.100-106
• /
• 2013

In this paper, in order to analyze lightning impulse response characteristics in combined installations of SPDs and RCDs, surge protection coordination between SPDs and RCDs are experimentally investigated by using the combination wave generator. Six different types of single-phase residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBOs) being present on the domestic market are tested according to KS C IEC 61009-1 standard. As a result, when a class I SPD is located on the source side of an RCBO, all kinds of specimens are able to provide the proper coordination between the SPD and RCBOs without nuisance tripping, unintended operation or damage due to test impulse currents. However, in the case that the class II SPD is located on the load side of RCBOs, a lot of L-N mode injected currents is split into the RCBO, and a few RCBOs are damaged. Coordination between SPDs and RCDs is not valid and a role of SPDs is of no use. When combining SPDs with RCDs, it is necessary to select SPDs and RCDs in consideration of the protection voltage level of metal oxide varistor embedded in RCDs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.492-497
• /
• 2019

This study analysed the legal concept of personal information(PI), which was not differentiated from behavioral information, and established it clearly for invigorating online targeted advertising(OTA), which draw attention in big data era; by selecting Guidelines of Assessment of Data Breach Incident Factors and Guidelines of Measures for No-Identifying Personal Information based on Personal Information Protection Act(PIPA) and Enforcement Decree of the PIPA. As a result, PI was defined as any kind of information relating to (1)a living individual(not group, corporate body or things etc.); (2)makes possibly identify the individual by his or her identifiers such as name, resident registration number, image, etc. (not included if not identify the individual); and (3)including information like attribute values which makes possibly identify any specific individual, if not by itself, but combined with other information which can be actually collected and combined). Specifically, PI includes basic, proper distinguishable, sensitive and other PI. It is suggested that PI concept should be researched continually with digital technology development; the effectiveness of the Guidelines of PI Protection in OTA, the legal principles of PI protection from not only users' but business operators' perspectives and the differentiation between PI and behavioral information in OTA should be researched.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.443-445
• /
• 2000

This paper describes the assessment of proper location of lightning arrester in combined transmission line which is connected with overhead line and underground cable. The modeling for simulation is established using the actual system in ATP Draw and EMTP. Simulation is carried out to find out the best point to install the arrester in given the model system. And also voltage and current is analyzed on cable covering protection unit(CCPU). The simulation result demonstrated the best location of arrester in the given transmission line through the detailed analysis and its assessment.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.19-22
• /
• 1998

In this study, the efficient channel coding method combined with CS-ACELP is proposed. The same convolutional coder and Viterbi decoder of COMA mobile communication system is used as channel coder. To make the best available use of limited channel coding redundancy, unequal error protection of punctured convolutional coder is used for variable reate allocation. But, the overall code rate is given by 2. The performance of proposed coder is analyzed and simulated in a Rayleigh fading channel. Experimental results show that the objective and subjective speech quality of variable rate channel coding methods are superior to those of non-variable channel coding method.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.1-6
• /
• 2004

Fresh ground beef was mixed with ascorbic acid, basil essential oil, majoram essential oil, or each essential oil combined with ascorbic acid and stored at 1 $\pm$ 1$^{\circ}C$ for 7 days. Color, lipid oxidation (TBARS formation), aerobic bacterial counts and pH were determined. Basil and majoram essential oils were effective in inhibiting color deterioration, lipid oxidation and bacterial growth. The combined addition of basil and ascorbic acid showed the highest protection against color fading, followed by majoram + ascorbic acid, and ascorbic acid alone. Basil and majoram essential oils were most effective in delaying TBARS formation (p < ().01). Ascorbic acid did not exert an antioxidative effect and even exhibited a pro-oxidant effect. The pH values of all samples increased slightly, but no significant differences were observed, either among treatments or throughout the storage time (p > 0.05).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.211-225
• /
• 2011

Railroad signalling systems are to control intervals and routes of trains. There are ATS(Automatic Train Stop), ATP(Automatic Train Protection), ATO(Automatic Train Operation) and ATC(Automatic Train Control) system. Trains are operated in the section which is met on the signalling system because various signalling systems are used in Korea. On the other words, trains are not operated in the section which is used in the other signalling system. To solve this problem, recently combined on-board system has been developed. The combined on-board system is designed by doubling the ATS, ATP and ATC system. Information signal is received by magnetic sensors in the ATC system and is received by antennas in the ATS and ATP system. Therefore, it is possible to arise transmission problems by magnetic coupling. In this paper, electric model of the ATS and ATP antenna is suggested and interference frequency by the magnetic coupling between the ATS and ATP antenna is estimated numerically. As a results of the magnetic coupling, the value of the magnetic coupling is presented without magnetic induction.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.383-386
• /
• 2001

Distance relay is tripped by the line impedance calculated at the relay point. Accordingly the accurate operation depends on the precise calculation of line impedance. Impedance can be accurately calculated in case of overhead line. However, in case of power cables or combined transmission lines, impedance can not be accurately calculated because cable systems have the sheath, grounding wires, and cable cover protection units (CCPUs). There are also several grounding systems in cable systems. Therefore, if there is a fault in cable system, these terms will severely be caused much error to calculation of impedance. Accordingly the proper compensation should be developed for the correct operation of the distance relay. This paper presents the distance calculating algorithm in combined transmission line with power cable using wavelet transform. In order to achieve such purpose, judgement method to discriminate the fault section in both sections was proposed using db1 coefficient summation. And also, error compensation factor was proposed for correct calculation of impedance in power cable.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.63-69
• /
• 2011

As environmental protection is becoming more and more important, green production has become a key issue for almost every manufacturer and will determine a manufacturer can be sustainable in the long term. Therefore a performance evaluation system for green suppliers is necessary to determine the suitability of suppliers to cooperate with the company. While the works on the evaluation and/or selection of suppliers are abundant, those that concern environmental issues are rather limited. The objective of this study is to construct a combined model based on fuzzy analytic hierarchy process (FAHP) and balanced scorecard (ESC) for evaluating green suppliers in the manufacturing industry. The ESC concept is applied to define the hierarchy with four major perspectives (i.e. financial, customer, internal business process, and learning and growth), and performance indicators are selected for each perspective. FAHP is then proposed in order to tolerate vagueness and ambiguity of information. Finally, FAHP is finally constructed to facilitate the solving process. With the proposed model, manufacturers can have a better understanding of the capabilities that a green supplier must possess and can evaluate and select the most suitable green supplier for cooperation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2004

In the proto design stage of a new car, the performances of an occupant protection system can be evaluated by CAE even though the real test should be carried out. The number of the real test is reduced by the exact predictions followed by the appropriate design recommendation. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters. That often leads to inconsistency between test and CAE. In this research, the robust design of a protection system such as airbag and load limiter is suggested considering the frontal crash. The parameter design scheme of the Taguchi method is introduced to obtain the robust design of arbitrary airbag and load limiter. It is performed based on the frontal crash test condition of US-NCAP with an arbitrary passenger car. The variances of the performances such as HIC, chest acceleration and probability of combined injury are calculated by the outer array and the Taylor series expansion. Through the analysis of the Taguchi method, the robust optimum is determined.