• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.931-954
• /
• 2003

It is widely recognized that economic time series involved not only the linearities but also the non-linearities. In this paper, when the economic time series data have the nonlinear characteristics we propose the forecasts method using combinations of both forecasts from linear and nonlinear models. In empirical study, we compare the forecasting performance of 4 exchange rates models(AR, GARCH, AR+GARCH, Bilinear model) and combination of these forecasts for dairly Won/Dollar exchange rates returns. The combination method is selected by the estimated individual forecast errors using Monte Carlo simulations. And this study shows that the combined forecasts using unrestricted least squares method is performed substantially better than any other combined forecasts or individual forecasts.

• Tribology and Lubricants
• /
• 제29권2호
• /
• pp.85-90
• /
• 2013

The effects of contact pressure on the sliding wear behavior of mild steel in a pin-on-disc type apparatus were investigated. Sliding wear tests were conducted with various combinations of the load and apparent area of contact. The wear behavior of mild steel as a function of sliding speed was independent of contact pressure. However, the wear rate at different sliding speeds was influenced by the load regardless of the apparent area of contact. This was attributed to the fact that there may be no difference in the real area of contact for any combination of the load and apparent area of contact.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.134-140
• /
• 1994

In this paper, an algorithm of CBAM(Combination Bidirectional Associative Memory) model proposes, analyzes and tests CBAM model `s performancess by simulating with recalls and recognitions of patterns. In learning-procedure each correlation matrix of training patterns is obtained. As each correlation matrix's some elements correspond to juxtaposition, all correlation matrices are merged into one matrix (Combination Correlation Matrix, CCM). In recall-procedure, CCM is decomposed into a number of correlation matrices by spiliting its elements into the number of elements corresponding to all training patterns. Recalled patterns are obtained by multiplying input pattern with all correlation matrices and selecting a pattern which has the smallest value of energy function. By using a CBAM model, we have some advantages. First, all pattern having less than 20% of noise can be recalled. Second, memory capacity of CBAM model, can be further increased to include English alphabets or patterns. Third, learning time of CBAM model can be reduced greatly because of operation to make CCM.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.391-392
• /
• 2009

본 연구는 영동지역에 위치한 영동화력발전소와 동해화력발전소에서 발생되는 석탄회(플라이애쉬, 바텀애쉬)를 이용하여 숏크리트용 혼합형 혼화재로서의 구조용 재료로서의 활용방안을 높이고자 내구성에 관련된 여러가지 실험 및 연구 수행을 하였다.

• Journal of Genetic Medicine
• /
• 제5권1호
• /
• pp.7-14
• /
• 2008

Twenty years have passed since a prenatal screening for Down syndrome and neural tube defect was applied to obstetric field. The Quad test (AFP, hCG, uE3, Inhibin-A) of the second trimester and the combination test (PAPP-A, hCG, NT) of the first trimester became popular now. The recent trend of prenatal screening is to combine these two screening tests together in order to increase a detection rate of Down syndrome. Three types of screening methods are introduced as follows; integrated test, sequential test and contingent test. In addition to combination of each test, an incorporation of characteristic ultrasound findings of Down syndrome is suggested for its risk calculation. The absence of fetal nasal bone would be a very useful marker especially in the first trimester screening test. According to a change of way calculating risk of Down syndrome, obstetrician's role will be more increased not by passive participation, but by active participation using ultrasound in risk calculation.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.129-132
• /
• 2004

A hybrid permeable reactive barriers(hybrid PRBs) composed of Fe(II) PRB, biological PRB and sorptive PRB was investigated to treat groundwater with multiple contaminations. We performed batch, column and pilot tests to determine removal rates and design parameters of each PRB media, and operated two hybrid PRB systems with pilot-scale barriers in series. The pilot test of the hybrid PRB system with the combination of Fe(II), biological media and black shale showed multiple contaminations could be removed in ground water. Nitrate could be treated below 20 mg/L and Cr(VI) was treated down to 0.05 mg/L. TCE was degraded below 0.001 mg/L in system. The hybrid PRB system with a proper combination of PRBs could remediate ground water with multiple contaminations.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.87-93
• /
• 1997

The bonding strength evaluation of light weight materials for electrical vehicle applications has been performed through single lap joint tests in which the design parameters such as fillet, joint style, adherend, bonding overlap length,bonding thickness, and environmental condition(soaking time in $25^{\circ}C$ water) are considered. It is experimentally oberved that lap shear strength of joint increases for higher fillet height, longer overlap length, and thinner bonding layer thickness. Al-Al adherend combination shows much higher lap shear strength than AL-FRP and FRP-FRP adherend combinations. Riveting at adhesive bonded joint of AL-AL adherend combination makes lap shear strength decrease. Effect of soaking time on lap shear strength is negligible.

• Advances in concrete construction
• /
• 제7권3호
• /
• pp.191-201
• /
• 2019

Bamboo concrete bond behaviour is investigated through pullout test in this work. The bamboo strip to be used as reinforcement inside concrete is first treated with chemical adhesive to make the bamboo surface impermeable. Various surface coatings are explored to understand their water repellant properties. The chemical action at the bamboo concrete interface is studied through different chemical coatings, sand blasting, and steel wire wrapping treatment. Whereas mechanical action at the bamboo concrete interface is studied by developing mechanical interlock. The result of pullout tests revealed a unique combination of surface treatment and grooved bamboo profile. This combination of surface treatment and a grooved bamboo profile together enhances the strength of bond. Performance of a newly developed grooved bamboo strip is verified against equivalent plain rectangular bamboo strip. The test results show that the proposed grooved bamboo reinforcement, when treated, shows highest bond strength compared to treated plain, untreated plain and untreated grooved bamboo reinforcement. Also, it is observed that bond strength is majorly influenced by the type of surface treatment, size and spacing of groove. The changes in bamboo-concrete bond behavior are observed during the experimentation.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.27-41
• /
• 2014

The use of carbon fibers (CF) and glass fibers (GF) were combined to strengthen concrete flexural members. In this study, data of tensile tests of 94 hybrid carbon-glass FRP sheets and 47 carbon and GF rovings or sheets were thoroughly investigated in terms of tensile behavior. Based on comparisons between the rule of mixtures and test data, positive hybrid effects were identified for various (GF/CF) ratios. Unlike the rule of mixtures, the hybrid sheets with relatively low (GF/CF) ratios also produced pseudo-ductility. From the calibrated results obtained from experiments, a new analytical model for the stress-strain relationship of hybrid FRP sheets was proposed. Finally, the hybrid effects were verified by structural tests of concrete members strengthened with hybrid FRP sheets and either carbon or glass FRP sheets.

• Wind and Structures
• /
• 제30권3호
• /
• pp.299-316
• /
• 2020

Based on wind tunnel tests, this paper investigates the aerodynamic behavior of a large span canopy roof with elliptical plan and hyperbolic paraboloid shape. The statistics of pressure coefficients and the peak factor distributions are calculated for the top and bottom faces of the roof, and the Gaussian or non-Gaussian characteristics of the pressure time-histories in different areas of the roof are discussed. The cross-correlation of pressures at different positions on the roof, and between the top and bottom faces is also investigated. Combination factors are also evaluated to take into account the extreme values of net loads, relevant to the structural design of canopies.