• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.778-784
• /
• 2004

Dyeing wastewater contains recalcitrant organics which can not be easily treated by conventional biological treatment. Therefore it has to be treated by other advanced oxidation process in order to remove COD and Color more efficiently. Fenton oxidation process is one of the most commonly applied processes in removal of COD and color for the dyeing wastewater. However it increase the treatment cost and the production of sludge by the use of the excessive chemical reagent. Ozonation is not suitable in Single treatment process because it is not effective in organics removal compared with Color removal. The purpose of this research in order to evaluate the comparable removal efficiency of COD and color by the combination of advanced oxidation processes for the dyeing wastewater. The sequential treatment processes of Fenton process and ozonation was more effective to remove organics and color than ozonation and Fenton process. The result of Fenton process for the pretreatment presented as the 81% removal of organics whereas ozonation process for the pretreatent presented as the 22.1% removal of organics. The removal of colour was higher as 81.3% for the ozonation as the pretreatment than 77.7% for the Fenton process as the pretreatment.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.65-69
• /
• 1981

The study has been carried out to investigate how the aluminium combination for the stannic processing influence on the weighty increase and physical characteristics of silk fabric to save the stannic cost. The results obtained are as follows; 1) It was shown that the optimum concentration of the combined aluminium salt was 5 percent for the stannic processing regarding to the weighty increase of silk fabric. 2) The stannic processing with aluminum combination resulted in an increase of 16 percent in silk weight more than that of the conventional stannic processing. 3) The shrinkage of fabric by soaping was reduced in the stannic or stannic aluminuium processed silk more than in the unprocessed silk. 4) The drop out weight of the stannic or stannic alumium processed silk was heavier in the acidic colour dyeing than in the reactive colour dyeing. 5) The softness of the stannic or stannic aluminium processed silk could be improved by the treatment of textile softener.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1051-1057
• /
• 2008

Safflower red and Amur Cork Tree dyes have used for dyeing on cotton fabrics largely. But they have low degree of lightfastness, So this study investigated the effect of BTCA pre-treatment on lightfastness of cotton fabrics dyed with Safflower red and Amur Cork Tree. The result is as the following; By FT-IR spectra, crosslingking was proved in cotton fabric pre treated with BTCA. K/S value of Safflower red dyed cotton fabric pretreated with BTCA was much more decreased than untreated cotton fabric with BTCA. It showed that the hue of the Safflower red dyed cotton fabric changed from reddish purple to red. However, K/S value of Amur Cork Tree dyed cotton fabric pre treated with BTCA was much more increased than untreated cotton fabric with BTCA. It showed that the hue of the Amur Cork Tree dyed cotton fabric changed from green yellow to yellow. For K/S value of Combination dyed cotton fabric pre treated with BTCA, Safflower red color was much more decreased than untreated cotton fabric. But Amur Cork Tree color was much more increased than untreated cotton fabric. It changed from reddish purple, red, yellowe red, to yellow in hue. ${{\Delta}E^*}_{ab}$ of Combination dyed cotton fabric in 40 hours irradiation was 15.7, however ${{\Delta}E^*}_{ab}$ of Combination dyed cotton fabric treated with 2% BTCA was 8.0, and that treated with 3% BTCA was 9.8. So, pre-treatment with BTCA to combination dyed cotton fabric with Safflower red and Amur Cork Tree showed more effective improvement of Lightfastness than untreated cotton fabric with BTCA.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.258-268
• /
• 2021

This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.406-413
• /
• 2009

This study was carried out to investigate the natural dyeing characteristics of Korean traditional hand-made paper (Hanji). The Hanji was dyed black with extractive of gallnut (Rbusjavanica L), leaves of Amur maple (Acer ginnala), nutshell of chestnut (Castania crenata), and persimmon juice and Chinese ink. And moreover, the Hanji was dyed not only using single and combination of dyestuff but also changing mordants and mordanting procedure. And we estimated the relationship between dyeing characteristics and dyestuff concentration (o.w.f.). The gallnut was the most principal material dyeing black. The procedure of mordanting from copper acetate to Iron (II) chloride and dyeing from gallnut to Amur maple dyestuffs were the best dyeing method for the Hanji to black. The K/S value of dyed Hanji increased with increasing concentration of dyestuff.

• Journal of Environmental Science International
• /
• v.14 no.7
• /
• pp.683-689
• /
• 2005

The consecutive combination process of a biological process as the pre-treatment and a chemical process as the post-treatment is applied for the dyeing wastewater. The poor efficiency of biological treatment using pure oxygen makes the chemical treatment cost high. It is necessary to improve the efficiency of biological treatment in order to reduce the cost of chemical treatment. The purpose of this paper is to find the minimum dose of chemical reagent to fit the Discharged Water Quality Standards for the different biological treatment effluents. Results revealed that the minimum dosage of Fenton's reagent lead to save the cost of chemical treatment based on the guideline dose in the treatment plant. The possible maximum saving reagents was up to $70\%$ for the effluent of the pilot plant packed with the carrier imbedded microorganisms which were selected from the present treatment plant.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.333-341
• /
• 2006

The concept for the decolorization in biological dye wastewater treatment systems is based on anaerobic treatment, for the reductive cleavage of the dyes' azo linkages, in combination with aerobic treatment, for the degradation of the products from azo dye cleavage, aromatic amines. Batch tests were conducted to examine the conditions and the factors affecting biological treatment of dye wastewater. From the tests, the removal efficiencies of organics and colors of dyeing wastewater were improved to $COD_{Cr}$ 27% and color 9% by injecting 10% of the domestic wastewater as a cosubstrate, and $COD_{Cr}$ 30%, color 22% with 30% injection of domestic wastewater. Therefore it was proved that decolorization efficiency is demonstrated with domestic wastewater as a cosubstrate. The analysis of aromatic amines in wastewater showed that decolorization was achieved by cometabolism while aromatic amines were produced by cleavage of azo bonds under anaerobic conditions and these products were removed in an aerobic tank subsequently.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.1
• /
• pp.33-48
• /
• 2022

This study was performed to compare the color emotion and preference of Koreans and Chinese for a two-color combination by dyeing cotton fabric with persimmon and indigo and to establish prediction models of color preference. Nine specimens prepared by combining two different colored fabrics (persimmon and indigo) were evaluated for color emotion and preference by Korean and Chinese groups of female college students. Koreans described most specimens as natural and traditional, whereas the Chinese described them as more pleasant and elegant as well as warmer and lighter than Koreans did. The contrast tone was the most preferred combination by both groups, whereas it was perceived as more modern and less warm by Koreans. Relationships between physical color variables and color emotions were quantified; these relationships were applied to establish a prediction model of color preference with tone combination types for each group. These results could help in making the design of fashion textiles more preference- and emotion-oriented for Korean and Chinese consumers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.10
• /
• pp.1028-1039
• /
• 2012

This study identified color emotion factors of naturally dyed two-color combination fabrics focused on yellowish and reddish shades to examine the relationship between color emotion factors and physical colorimetric variables (as well as tone combination groups) to provide prediction models for color emotion factors of naturally dyed fabrics with a two-color combination. Each of eight different stimuli were prepared by paring two pieces of silk fabrics colored in red and yellow by natural dyeing respectively; in addition, their color emotion descriptors were evaluated by human subjects using semantic deferential scales. 'Joyful', 'Natural', 'Classical', and 'Soft' were extracted as color emotion factors for the naturally dyed yellowish-reddish combination fabrics. They were found to be significantly affected by physical colorimetric variables such as CIE $C^*$ and $L^*$ and tone combination groups. Finally, prediction models for all color emotion factors were established using physical colorimetric variables and tone combination groups that led to the conclusion that they could be applicable to design a color combination for naturally dyed fashion fabrics.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2016

The objectives of this research were to study the effect of salt-shrinkage finishing of silk on shrinkage degree and dyeing property of cochineal, and to investigate the efficacy of obtained results for imparting surface design effect on silk fabric. Ultimately it was aimed to suggest a technical process for developing natural dyed silk products with diverse design. Premordanted silk fabric was treated with $Ca(NO_3)_2$ solution(gravity: 1.45) at $90^{\circ}C$ for 1 min, washed, dried for further evaluation. The shrinkage of salt-treated fabric was calculated. The effects of salt treatment on the dye uptake of cochineal and colorfastness were investigated. The degrees of shrinkage were 10% and 3% for warp and weft, respectively. The salt treatment resulted in improving dye uptake of cochineal slightly. In addition, it improved colorfastness to washing and light. On the basis of the results, a technical process composed of premordanting, salt treatment and natural dyeing was suggested and using the process, two examples of textile design were presented. It can be concluded to impart various three dimensional surface design effect on silk fabric by applying salt-shrinkage finishing with combination of natural dyeing and mordanting.