• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.256-265
• /
• 2009

The purpose of this study is to check color change, color fastness, increase wt., antibiosis, and UV-protection efficiency depending on gallnut concentrations and mordanting methods, when silk fabrics dye with gromwell according to pH. This results will contribute in developing of natural mordant with multi function. The results are as follows. ${\lambda}_{max}$ of Gallnut extracts was near 299 nm. When gallnut was used as a mordant, at all pH levels, pre-mordanted fabrics had red color and post-mordanted ones had red-purple color which was closed to natural color of gromwell. Brightness of post-mordanted fabrics was higher than that of pre-mordanted fabrics. In the case of chroma, pre-mordanted fabrics was higher than post-mordanted fabrics. There was no significant difference of color, brightness, and chroma depending on gallnut concentration. As mordanting concentration increased, fabric weight gradually went up and increase weight reached maximum $17{\sim}19%$. At all pH levels, color fastness improved by pre-mordanting and post-mordanting, and it showed the maximum $4{\sim}5$ grade of wet fastness and 5 grade of dry cleaning. Antibiosis of silk fabric was improved by gromwell dyeing and synthetic tannin mordanting. Antibiosis of gallnut extracts was excellent. The color fastness and antibiosis were preserved after 10 cycle dry cleaning. UV-protection efficiency was excellent by dyeing with gromwell and mordanting with gallnut.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.11-19
• /
• 1998

For the purpose of standardization and practicability of dyeing by natural dyes, the mordanting and dyeing properties of cochineal and carminic acid were studied. Appropriate extraction, dyeing and mordanting condition of cochineal were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of cochineal solution was 495nm, carminic acid was 533nm and 577nm. The color of carminic acid solution was affected by pH 6~9. The optimum temperature to extract cochineal was $80-100^\circ{C}$ and dyeing solution for 1 hour. And effective dyeing time to silk was 60min. Effective mordanting temperature was $80^\circ{C}$, and its time was 30min. In case mordants concentration, the maximum absorbance of Sn solution was 3%, K, Cu and Cr were in 1%. K/S value of dyeing fabrics was recoginazed by mordant treatment, specially Fe, Sn, Al, Cu. In the case of cochineal light fastness was increased by mordant treatment, specially Fe treatment. Perspiration fastness was good in acidic solution than in alkaline solution and perspiration fastness of cochineal was poor. Fastness of abrasion and dry-cleaning were good and these fastness improvement were generally effective for post-mordanting treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.44-50
• /
• 2002

This research was performed to investigate the physical properties and color appearance of Hanji manufactured using bast fibers dyed separately by two reactive dyes with different colors. The breaking length of color Ha was above 7 km. The fastness was five grade; the use of reactive dyes made the color of the Hanji not to be faded away. The Hanji manufactured by mixing uniformly two types of bast fibers separately dyed showed the mixed color of two different colors. However, the shives showed their original colors, resulted in irregular color patterns all over the sheets. The color of color Hanji with different colors in the front and back side of sheets showed color difference between front and back side of the sheets. Accordingly, the color of the sheet has a reflection from the backside, resulted in Pink. The colors of the Hanji appeared in this study could not be found from the Hanji manufactured by traditional methods.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1995

The optical behavior of coloring matter extracted from onion's coats, the depression effects of destruction, yellowing and W transmittance of silk treated with color solution of onion's coats color difference of silk fabrics dyed with acid dyes and drycleaning fastness of silk treated with color solution has been investigated. The results are as follows : 1) The coloring matter extracted from onion's coats by alkali-acid method appeared properties of aglycon type. 2) &{\lambda}_{max}&of color solution extracted by distilled water was found at 280 and 327nm. 3) The decrease of tensile strength and the elongation of the silk treated with color solution were depressed but those of untreated silk were increased by irradiation of UV light. 4) The yellowness index of silk treated with color solution showed a little change by irradiation. 5) The UV transmittance of silk treated with color solution was decreased as increasing concentration of color solution. 6) The color difference after dyeing with several acid dyes on treated and untreated silk fabrics showed remarkable changes. 7) Drycleaning fastness of silk treated by color solution was excellent.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1011-1019
• /
• 1998

The natural dyestuff(squid ink) was manufactured from squid ink by boiling in 0.1% NaOH solution and powdering in freeze dryer. Cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured squid ink to investigate the dyeability and color fastness. Dyeing was operated in acidic dyebath of pH 4 because the squid ink is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially silk fabrics were dyed deeper than others because of being amine group. But dyeability on cotton fabrics was low and developed with chitosan treatment. All the dyed fabrics showed excellent in color fastness to crocking and laundering. Also light fastness of them were excellent except nylon. The light fastness of dyed-nylon fabrics was as poor as grade 1, but they could be improved to grade 4 by aftertreatment with gallicacid. Useing the natural dyestuff-squid ink powder, we could execute whenever we want to dye fabrics in the adequate concentration. Dyeabilities were developed according to repeating times of dyeing and the increased dye concentration. We could recycle the wasting sources.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.32-37
• /
• 2001

Silk fabric was sputter-treated with Au, Cu, SUS, and Ti using poly(vinyl alcohol) (PVA) as a binder, and its changes in color, antielectrostatic property, airpermearbility, and rubbing fastness were investigated. Sputter-treated silk fabric had a natural color of metal target, which was deepened by treatment of PVA solution. The rubbing fastness of thin metal layer formed by sputtering was improved by PVA treatment. Au had highest rubbing fastness among the metal targets. In addition, PVA treatment posterior to sputtering resulted In higher rubbing fastness than the other treatment method. However, a reverse trend was found in antielectrostatic property. Air permeability of the sputter-treated silk fabric was improved by PVA treatment, which was highest when sputtering was conducted prior to PVA treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.70-79
• /
• 2015

This study was carried out to analyze deterioration characteristics of color-pigments painted Hanji to preserve and restore the cultural properties. On the traditional painting technique, glue was used with pigments in various ways for painting, but it eventually caused the deterioration of paintings. Thus, five colors were selected and analyzed for this study for investigating their characteristics of deteriration. Three kinds of glues (Wugyo, Nokgyo, and Togyo) and two kinds of pigments (Chinese and Gilsang) were painted on the Hanji for the accelerated aging test. And then color fastness of pigments and tensile strength of painted Hanji were measured for the estimation of deterioration degree. The results of SEM-EDS showed that Chinese pigments including blue, yellow, green, and red were composed of inorganic substances but the brown was organic substance. Gilsang pigments were composed mainly of Si and Ti ions. Color fastness of the Gilsang pigment blue, yellow, green, and brown were better than those of Chinese. Chinese pigment brown with organic substance showed the worst color fastness. Generally, Chinese pigments painted Hanji showed higher tensile strength than Gilsang in the accelerated aging test. Hanji treated with Chinese pigment and Nokgyo (antler glue) blends and Gilsang pigment and Togyo (rabbit pelt glue) blends showed higher tensile strength than the others. And Andong Hanji showed the highest tensile strength.