• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.344-348
• /
• 2008

This study was carried out to evaluate the correlation between shear force determined by tenderness analyzer and grade decision factors consisting of yield grade (carcass weight, ribeye area, backfat thickness) and quality grade (meat color, fat color, marbling, maturity, texture) in a total of 200 Hanwoo cows. Results showed that there was a negative correlation between shear force and yield grade (r=-0.186, p<0.01), i.e., when the grade of carcass yield increased (A score), the shear force value decreased. Shear force scores showed a significant correlation with marbling scores (r=-0.19, p<0.01), but no correlation with scores of meat color, fat color and texture. The maturity of Hanwoo cows is known to be one of the major factors for evaluating the grade, and the maturity showed no significant correlation with shear force value (r=-0.05, p>0.05). It is possible to get useful information for evaluating the grade of Hanwoo cows if further studies addressing the correlation of water holding capacity, juiciness, taste and overall acceptability with maturity are carried out.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.40-50
• /
• 2002

In order to remove the pollutants effectively in the dye wastewater by chemical precipitation process, coagulation arid flocculation test were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(B79), and we could get the best result lot the removal of disperse dye(B56) in the aspects of TOC removal efficiency and sludge field. When the Ferrous sulfate dosage was $800mg/\ell$, the sludge settling velocity was very fast>, and the color was effectively removed in the disperse dye(B79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge field was decreased in comparison with the Ferrous sulfate or the Ferric sulfate was used in the disperse dye(B56) solution. The general color removal effect for the disperse dye(B56 and B79) solutions, the Ferric sulfate was more proper coagulant than the Alum. It was showed that TOC removal was improved 5% and over by the addition of Calcium hydroxide, and $30mg/\ell$ of sludge yield was decreased(B79). When Alum or Ferric sulfate was used as a coagulant, pH condition for most effective color removal was 5 in B56 solution. In case of Ferrous sulfate as a coagulant, most effective pH condition for color removal was 9. When Ferric sulfate or Ferrous sulfate was used as a coagulant, pH condition for most effective color removal was 9 in B79 solution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.335-338
• /
• 2004

In this study has developed analysis system for automatic inspection of FPD(Flat Panel Display) characteristic, such as brightness, view angle, color ratio in the manufacturing process. Developed system consists of inspection-sensor part, acquiring a data by 3-CCD Color CCD camera and Inspection-stage part, driving a FPD holder to rotation and tilt direction. In experiment results, we could have ensured easily brightness distribution, available view angle, color reproduce and could expect to improve the quality, productivity, and yield.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.168-174
• /
• 1996

Dyeing on silk with vat dyes which shows good color fastness at strong alkaline conditions were newly examined. The optimum conditions of dyeing bath to prevent the damage on the tensile strength and elongation were sodium hydroxide(NaOH) 10g/l, sodium hydrosulfite(Na2S2O4) 20~22 g/l, for 30 min at 5$0^{\circ}C$. The color yield of silk fabrics was increase according to the concentration of NaOH and Na2S2O4, but decreased at higher concentration than that of NaOH 10g/l and Na2S2O4 22g/l. The vat dyeings showed excellent color fastness against washing and light, compared with the conventional dyeings.

• Food Science of Animal Resources
• /
• v.33 no.3
• /
• pp.305-316
• /
• 2013

The strategy for increasing the palatability of Hanwoo beef through fattening could lead to a decline in yield grade. The aim of this study was to examine the meat quality traits of Longissimus dorsi (LD) muscle from carcasses of Hanwoo steers at different yield grades. A total of 246 Hanwoo steers was divided into the following yield grades: A (n=77), B (n=76) and C (n=93). Meat quality traits, including proximate composition, cholesterol content, nucleotide content, dipeptide content, creatine and creatinine, free amino acid content, fatty acid composition, instrumental meat color, pH, water holding capacity, drip loss, cooking loss, and sensory qualities of the LD muscle from the 3 yield grades of Hanwoo carcasses were measured. The decline in yield grade from A to C resulted in an increase in crude fat and cholesterol content as well as a decrease in inosine 5'-monophosphate and aspartic acid in the LD muscle (p<0.05). In terms of fatty acid composition, the LD muscle from yield grade A had higher SFA and PUFA and lower MUFA content than that from yield grade C (p<0.05). However, the ratio of PUFA/SFA and n-6/n-3 did not differ among LD muscles from the 3 yield grades. There were no significant differences among other meat quality traits in relation to the yield grade. In conclusion, we suggest that the changes of substances related with health and flavor can be considered in order to obtain better quality Hanwoo beef.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1083-1094
• /
• 2016

Carcass and price traits of 72,969 Hanwoo cows, bulls and steers aged 16 to 80 months at slaughter collected from 2002 to 2013 at 75 beef packing plants in Korea were analyzed to determine heritability, correlation and breeding value using the Multi-Trait restricted maximum likelihood (REML) animal model procedure. The traits included carcass measurements, scores and grades at 24 h postmortem and bid prices at auction. Relatively high heritability was found for maturity ($0.41{\pm}0.031$), while moderate heritability estimates were obtained for backfat thickness ($0.20{\pm}0.018$), longissimus muscle (LM) area ($0.23{\pm}0.020$), carcass weight ($0.28{\pm}0.019$), yield index ($0.20{\pm}0.018$), yield grade ($0.16{\pm}0.017$), marbling ($0.28{\pm}0.021$), texture ($0.14{\pm}0.016$), quality grade ($0.26{\pm}0.016$) and price/kg ($0.24{\pm}0.025$). Relatively low heritability estimates were observed for meat color ($0.06{\pm}0.013$) and fat color ($0.06{\pm}0.012$). Heritability estimates for most traits were lower than those in the literature. Genetic correlations of carcass measurements with characteristic scores or quality grade of carcass ranged from -0.27 to +0.21. Genetic correlations of yield grade with backfat thickness, LM area and carcass weight were 0.91, -0.43, and -0.09, respectively. Genetic correlations of quality grade with scores of marbling, meat color, fat color and texture were -0.99, 0.48, 0.47, and 0.98, respectively. Genetic correlations of price/kg with LM area, carcass weight, marbling, meat color, texture and maturity were 0.57, 0.64, 0.76, -0.41, -0.79, and -0.42, respectively. Genetic correlations of carcass price with LM area, carcass weight, marbling and texture were 0.61, 0.57, 0.64, and -0.73, respectively, with standard errors ranging from ${\pm}0.047$ to ${\pm}0.058$. The mean carcass weight breeding values increased by more than 8 kg, whereas the mean marbling scores decreased by approximately 0.2 from 2000 through 2009. Overall, the results suggest that genetic improvement of productivity and carcass quality could be obtained under the national scale breeding scheme of Korea for Hanwoo and that continuous efforts to improve the breeding scheme should be made to increase genetic progress.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.146-150
• /
• 2000

In order to enhance the yield and physical property of Korean red ginseng extract, preheating stage was added to the inception of red ginseng manufacturing process and its effect was investigated. Preheating of raw ginseng at $70^{\circ}C$ for 2 hour followed by steaming for 2 hours increased the yield of water and 60% alcohol extract most effectively. Those yields were the highest at the same condition as above except preheating time shortened to 1 hour at $70^{\circ}C$. Steaming time had little effect on the yield of water and 60% alcohol extract. The content of starch in red ginseng was reduced effectively by preheating of raw ginseng at $70^{\circ}C$. The brown color intensity of red ginseng increased in proportion to preheating temperature in the range of $50-70^{\circ}C$. However, there was no increase in the color intensity at $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.198-203
• /
• 1997

The ground persimmon puree was treated with two kinds of commercial polysaccharide hydrolyzing enzymes (Viscozyme and Celluclast) in order to study their effects on the extraction yield, viscosity, color, titratable acidity and sugars. Hydrolysis with Viscozyme which has enzymatic activity of arabinase, cellulase, xylanase, hemicellulase and ${\beta}-glucanase$ significantly increased the extraction yield, L-value and reducing sugar and decreased in viscosity by treatment for 10 min at $50^{\circ}C$. The extraction yield of the juice was increased from 42.7% to 80% by Viscozyme while the Celluclast to 73.3%. On the other hand, the sensory properties of persimmon-like flavor, scarlet and orange color were greatly improved for the juice hydrolyzed with Viscozyme for 60 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.668-674
• /
• 1998

Physico-chemical qualities of pyunyuk depending on the cooking time were evaluated to produce high quality and to reduce labor and processing time. Pork headmeat divided into two parts was cooked for 1~4hrs, trimmed and pressed with 110kg/$\textrm{cm}^2$(gauge pressure) for 3.5hrs at 1$0^{\circ}C$. The contents of general nutrients, yield, texture, color, fatty acid composition, gel structure, and sensory evaluation were observed. Deboning time was very dependent on cooking time. Optimum cooking time observed in this study was 2~2.5hrs for efficiency of deboning and yield. Excess cooking time resulted in low yield and working efficiency. Yield variation depending on the cooking time was 14.3~26.0% and it was reduced by increasing the cooking time. The content of moisture was 53.5~54.8% which was not significantly different by cooking time. The content of crude fat was 14.2~26.0% which was decreased by increasing the cooking time. The contents of crude protein(21.1~26.3%) and mineral(1.4~2.7%) were increased by increasing the cooking time. The color of pyunyuk was significantly different by cooking time(p<0.05). In the texture, hardness and chewiness of the pyunyuk cooked for 2hrs were significantly higher than others processed in this study(p<0.05). However cohesiveness and springiness were not different among pyunyuks. With sensory evaluation, hardness was similar among the pyunyuks cooked over 2hrs. The pyunyuk cooked for 1hr showed higher value in juiciness than the pyunyuk cooked for 3~4hrs(p<0.05). The % of saturated fatty acids was decreased by increasing the cooking time, and gel structure of pyunyuk cooked for 2hrs was the most compact among treaments. In conclusion, 2hrs was proper as a cooking time concerned with working efficiency and physico-chemical quality of pyunpyk.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.580-593
• /
• 2023

The purpose of this study was to analyze whether seawater has positive effects on appearance characteristics, such as CIE a^*, and to determine the gas composition concentration that is suitable for maintaining it. Pork hind meat was cured with four types of curing agent for 5 d at 4℃. The different curing agents comprised the control salt, control nitrite pickling salt (CN), treatment brine, and treatment bittern (BT). The cured hams were cooked at 65℃ for 4 h and packaged at O₂:N₂ gas ratios of 7:3, 8:2, and 9:1 for 3 wk. The physicochemical properties were assessed immediately after heating the sample, and the color properties were measured after a 3 wk storage period. Based on the correlation results of the physicochemical properties, BT had a higher curing and cooking yield than the other treatments, owing to its high salinity. Results of color properties for BT (7:3) and CN (8:2) showed similar color CIE L^*, CIE a^* chroma, and hue angle values. Therefore, BT can be said to be a sous-vide curing agent suitable for preserving the color of ham, and a high nitrogen concentration of 30% helps to maintain the appearance of seawater sous-vide ham.