• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.131-132
• /
• 2023

Recently, the construction industry has seen the emergence of interior and exterior finishes using ultra-high performance concrete (UHPC) and colored concrete products using precast concrete (PC). However, the excessive amount of pigment used for coloring reduces the strength of the concrete. There is a need to improve the durability and chromaticity of colored concrete, and further analytical studies on the properties of colored concrete are also required. Therefore, in this paper, colored ultra-high strength cement composites (C-UHSCC) containing red and green inorganic pigments were prepared, and the compressive strength and color of the specimens were measured according to the age, and the correlation between strength and color was analyzed by simple linear regression analysis using R² value. The results showed that the red color was highly correlated with L^* and a^*, and the green color was highly correlated with a^*. These results can be considered for various concrete formulations, but research is needed to suggest the optimal pigment mixing ratio for proper strength and color development.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• 한국의류학회지
• /
• 제30권1호
• /
• pp.115-124
• /
• 2006

Natural dyes are environmentally and human compatible. But they are not various or not fast in color. The mixed dyeing have been attempted to solve these disadventages of natural dyes. The persimmon juice dyed fabrics have brown-color and good hygienic properities however low color fastness. The onion dyeing show similar brown-color and have good color fastness caused by querectin existed in onion outer skins. Mixed dyeing was carryied out on silk fabrics using persimmion juice and onion outer skin extract in this study. The mixing method were persimmon juice dyeing and then onion dyeing(P-O), onion dyeing and then persimmon juice dyeing(O-P) and dyeing in the mixture of persimmon juice and onion outer skin extract simultaneously(P+O). The mordants were none-mordent, gallic acid after-treatment and alum after-treatment. Several persimmon juice dyed fabrics were irradiated for 2 hours before onion dyeing(PU-O). The color values of dyed silk fabrics were as follows. The persimmon juice dyed silk fabric developed to yellow-red color after 2 hours of uv irradiation. Onion dyed fabrics show similar yellow-red color after dyeing without uv irradiation. The effect of alum after-treatment on color difference were highest in onion dyeing. The dyeabilities of both P-O and O-P were higher than persimmom juice dyeing and onion dyeing. The dyeabilities of P+O was lower than persimmom juice dyeing and onion dyeing. The value of color difference of alum-treated fabric was the highest. The color difference of P-O and O-P caused from 2 to 4 hours of uv-irradiation were lower than those of persimmon juice dyed fabrics. Onion skin extract could prevent the color-change of persimmon juice dyed fabrics in mixed dyeing. The color difference of PU-O was higher than the P-O.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.

• 대한영양사협회학술지
• /
• 제12권1호
• /
• pp.32-43
• /
• 2006

The purpose of this study is to find out the optimal mixing ratios of three different amounts of pectin, sugar and citric acid for preparation of garlic jam through response surface methodology(RSM) based on the sweetness, pH, color, sensory and texture test. As the sucrose content increased, the sweetness, cohesiveness, color, flavor, gloss and overall palatability of garlic jam tended to be high and the lightness tended to be low. As the pectin content increased, the adhesiveness of garlic jam tended to increase. As the citric acid content increased, the overall palatability of garlic jam tended to be high and the pH tended to be low. The Pectin levels were included 1.8-2.1g, sucrose levels were included 325-342g and citric acid levels were 5.8-6.1g. The optimal mixing ratios of a pectin, sugar and citric acid for manufacturing the best quality of garlic jam were 2.0g, 334g and 6.0g, respectively.

• 보존과학연구
• /
• 통권20호
• /
• pp.121-137
• /
• 1999

Among pigment used at work of Dan-Chung, Emerald Green is specific illuminating fluorescent light of green. It is very difficult to change other organic or inorganic pigment. All of the internal high class pigment has rare light. But Emerald Green is superior to fresh color and stability out of industrial chemical products. It forms over 50% of quantity and importance of a pattern painting. Emerald Green prohibited to produce because of its toxicpollutants, so required to changing pigment development. It is characterized to excellent color, convenient work, economical, against-sunlight, against-air pollutant and durability. The result of a test is follows; 1. We are investigated into producing internal natural Emerald Green, import external pigment and industrial synthesis method etc. but unable to buy because of its toxic pollutant. 2. We are made six samples by yellowish and green is hpigment mixing. We tested on against sunlight and air pollutant. The best mixing ratio is follows. Titanium Dioxide R760 : 18g- Chalk, White Wash : 10g- Permanent Yellow : 7g- Cyanine Green : 8g- Chrome Yellow : 3g- Resin(Vehicle) : Acryl Emulsion(Styrene + 2-Ethyl HexylAcrylate + Methyl Meth Acrylate) 8%

• 기술사
• /
• 제33권3호
• /
• pp.71-79
• /
• 2000

The effects of alkali salts adding on the cooking quality improving in dried noodles were investigated in the good texture maintaining for preventing solid soluble losses ,through chemical analysis and actual manufacturing practice ,the following results were obtained. Experiments were took a special flour of ASW:DNS=70:30, thickening agent(TA) composed of K2CO3 58%, Na2CO3 36% and Na4P2076%, and emulsified oil(EO) mixing of corn oil 44%, polysorbate 23%, emulsifier(ester of glycerin and fatty acids) 21%, soy lecithin 12%. When the mixing ratio of TA and EO to flour, is 0.03 and 1.5%(w/w) or morel than, satisfied the good quality. The water soluble solid matters content of the lowest 3.2% in the treating group that TA and EO is 0.03 and 1.5%(w/w) respectively, comparing to the 7.3% in the control group provides a excellent cooking quality. The research achieves the similar effects at specific gravity, water absorption ratio, weight increasing rate and volume expansion ratio. According to appearance test the more treating of TA turn the noodle into deeper yellow-green color. Turning to the deeper yellow color according to the increasing of EO provides better

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.968-973
• /
• 2009

To get a variety of colors on silk fabrics with natural dyes, mordanting and combination dyeing were carried out. Gromwell, sappan wood, safflower were used as the three primary colors for combination dyeing. Metal compounds containing alum and iron were used as mordanting agents. In combination dyeing of safflower and sappan wood, safflower and gromwell, gromwell and sappan wood, various colors were obtained according to the content of dyes used. Safflower/sappan wood dyeing showed different colors between yellow red and red purple of Munsell color circle such a YR, R and RP. And safflower/gromwell dyeing showed R, RP, P and PB Munsell color circle and then gromwell/sappan wood showed R, RP and P. As the result of these experiments, wide range of colors (YR-R-RP-P-PB-B) were obtained according to various mixing portion of safflower, gromwell, sappan wood, dyebath pH and repetition dyeing.

• 환경위생공학
• /
• 제17권3호
• /
• pp.89-98
• /
• 2002

The changes of conventional clarification process and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. The removal of waste matters such as SS, organic matter, color and turbidity contained in dyeing wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 84% of color in dyeing watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• 한국식품위생안전성학회:학술대회논문집
• /
• 한국식품위생안전성학회 1994년도 하계 학술 심포지움
• /
• pp.41-49
• /
• 1994

The meanings, classification, and regulatory status of 'natural food colorants' are discussed. Nowadays the technological advances for processing Cochineal color is flourishing here and aboard, makes highly concentrated products (e.g., 95% Carminic acid) is comercially available. Application of carminic acid for a food system needs target-specific formulation, mixing with alumn, tartaric acid, and other salts to stabilize the color hue in food system. On the other hand, carmine, the aluminium-lake of carminic acid, is more convenient product to be used and would give more strong color. Of these reasons Carmine is much popular product than Cochineal extract in Western and European countries. We insist that carmine should be also certified as natural colorant together with Cochineal extract in Korea. Authors expect that several kinds of anthraquinone colorant (Lac and Kermes) would be introduced in Korean market in near furture.