• 펄프종이기술
• /
• 제44권5호
• /
• pp.46-53
• /
• 2012

The purpose of this study was to investigate the functional properties of Changhoji with natural dyeing. This research would provide a basic information for interior material Changhoji. To estimate functional properties of super eight colors Changhoji, water staining, lightfastness, and floodlight color test were executed. In term of the water staining test, blue color showed the clear and other colors showed the little spot. As a result of measuring the lightfastness, Magenta color dyed with sappanwood showed the worst. But blue color dyed with indigo and Turquoise color dyed with indigo and Pagoda tree flower showed the highest. As a result of floodlight color test was no difference between sample color and floodlight color.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.215-225
• /
• 2003

The residential and welfare facilities for the elderly are continuously increasing due to change of value on family under situation of aging population increase. And it is predicted that accommodation capacity of facilities for the elderly and its rate those facilities takes compared to whole social welfare facilities will be accelerated considering past increase speed. On the other hand, about 60% of the elderly have low physical and mental level almost close to disabled people therefore special environmental concerns helping their independent living are necessary. Among them, color application is one of the most important factors for smooth understanding, communication and psychological remedy effect for them. The purpose of this study is to analyze the interior color status in assisted living facilities for the elderly in America which is a leading country in terms of the understanding and policy for the elderly as a part of the research project to suggest the developed solution about the Korean residential welfare facilities for the elderly For this purpose, not only importance and effect of color and visual characteristics and reaction to color in elderly environment but also general concept and policy of the ‘assisted living facility’ in America were researched through documents review. And measuring of color on 5 main spaces such ; lobby/lounge, corridor, dining room, bedroom, stairway/ramp of the 10 facilities in America were performed under analysis of its functional and aesthetic level based on Moon & Spencer's color theory.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.815-820
• /
• 2001

This study is to set a new standard for using of the colorimetric method through grasping the character of the colorimetric method, and measuring the chloride concentration at the place of the change of color. Also, to predict chloride concentration around rebar and time reaching limit chloride concentration through measuring the chloride concentration of concrete surface by the colorimetric method and this study presents the new program of concrete degradation and diagnosis of the durability by salt damage. First the use of the colorimetric method was examinated, second the chloride concentration through slicing concrete submerged in artificial seawater for 6 months was measured. And the chloride concentration at the place of the change of color was calculated by using colorimetric method. Finally, the cloride concentration of the concrete surface was calculated.

• Journal of information and communication convergence engineering
• /
• 제15권4호
• /
• pp.250-255
• /
• 2017

In this paper, we propose a method of detecting the region for measuring intima-media thickness (IMT). The existing methods for IMT measurement are automatic, but the region used for measuring IMT is not detected automatically but often set by the user. Therefore, research on detecting the intima-media region is needed for fully automated IMT measurement. The proposed method uses a morphological feature of the carotid artery visible as two long high-brightness horizontal lines at the upper and lower parts. It uses Gaussian blurring, ends-in search stretching, color quantization using a color-importance-based self-organizing map, and morphological operations to emphasize and to detect the morphological feature. The experimental results for evaluating the performance of the proposed method showed a 97.25% (106/109) success rate. Therefore, the proposed method can be used to develop a fully automated IMT measurement system.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.35-48
• /
• 2006

Textile decalcomania printing is how after the disperse dye which is melting and vaporizing absorbs on the surface of the cloth, it colors by permeating into the cloth inside. So it has applied a lot to the synthetic fiber like polyester. However, because there is no showing right temperature and time in case of printing on the polyester fiber and the microfiber, this study aims at it. The experimental methods are like this : first measuring the density for the objective judgment, and measuring colors with the colorimeter, and then study for the color reproduction through a visual evaluation.

• 대한치과기공학회지
• /
• 제44권3호
• /
• pp.76-80
• /
• 2022

Purpose: The purpose of this study is to analyze the depth according to curing using photocurable resin for dental three-dimensional printing. Methods: A stainless mold with a height of 4 mm was prepared. Ultraviolet (UV) polymerization resin was injected into the mold. Photocuring was then performed for 5 minutes using a photopolymerizer, and the height was measured using a digital measuring instrument (first group). Second, light polymerization was also performed outside the mold for 5 minutes, and the height was measured using a digital measuring instrument. Third, light polymerization was further performed for 5 minutes, and the height was measured using a digital measuring instrument. Statistical analysis was performed with the Kruskal-Wallis test, which is a nonparametric test (α=0.05). Results: The third group had the largest measurement length, whereas the first group had the smallest. However, the difference between groups was not statistically significant (p>0.05). The color of the first group was different from that of the second and third groups. Conclusion: All of the 4-mm-thick photocured specimens had a curing reaction, but the part that was not directly irradiated with UV did not show its original color.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.189-195
• /
• 2023

In this study, as one of the eco-friendly dyeing methods, indigo, Phellodendron amurense and Caeasapinia sappan were complexed dyed on cotton fabric. For complexed dyeing, the cotton that was pre-dyed 5 times with indigo was dyed 1 ~ 2 times repeatedly with Phellodendron amurense and Caeasapinia sappan. Then the color, tensile strength, density, and color fastness of complexed dyed sample were analyzed and the following analysis results could be obtained. As a result of color difference measurement, the L* value was 22.7 in the sample in which the cotton was dyed 5 times and then the Phellodendron amurense was dyed 1 time, and the K/S value was 15 or higher in all samples. As a result of measuring the strength, cotton fabrics tended to have a slight decrease in tensile strength when complexed dyeing. As a result of measuring the density, the density decreased by 15 ~ 20% in all samples at the warp and increased by 20 ~ 30% in the weft due to the complexed dyeing of cotton fabric. Moreover, the fastness to washing and drycleaning showed good results of 2 ~ 3 or higher, and the light fastness was 4 or higher.

• 방송공학회논문지
• /
• 제13권6호
• /
• pp.941-950
• /
• 2008

프로젝터를 사용해서 영상을 프로젝션할 때의 결과는 스크린의 형태나 컬러, 주변 조명 등의 제반 환경에 의해서 달라진다. 원하는 영상을 얻기 위해서는 이러한 환경적인 요소를 고려하여 출력 영상을 화소별로 보정하는 기술이 필요하다. 컬러 보정은 이러한 기술 중 대표적인 것으로 스크린을 카메라로 촬영해서 주변 조명 상태나 스크린의 반사 특성 등에 대한 정보를 화소별로 얻은 뒤, 출력할 대상 영상을 이에 맞게 미리 변형해서 출력하는 기술이다. 이런 연산은 영상의 모든 화소에 대해 각기 다른 연산을 수행해야 되기 때문에 실시간 연산을 위해서는 계산 과정을 간략히 하는 것이 매우 중요한 일이다. 본 논문에서는 컬러 필터를 사용해서 프로젝터-카메라 시스템에서 서로간의 컬러 혼합을 제거함으로써 계산을 간략히 하는 방법을 제안한다. 실험을 통해, 컬러 혼합 요소를 충분히 감소시키면 채널 간 상호 간섭은 무시할 수 있으며, 제시된 방법이 영상 보정 결과의 품질을 유지하면서 계산 속도를 44%가량 증가시킬 수 있음을 보였다. 제시된 방법은 프로젝터를 사용한 대화면, 고화질 영상장치를 위해 중요한 요소 기술이 될 것으로 생각된다.

• 복식문화연구
• /
• 제25권4호
• /
• pp.519-528
• /
• 2017

Mobile shoppers have encountered frequent color mismatch in the products that they have purchased, as they can only rely on their sense of sight. Therefore, fabric color and color difference recognized by smartphone display during mobile shopping were studied using instrument analysis method. It aimed to gather precise information on actual fabric color understanding of the mobile shoppers purchasing textile products. Three smartphones were selected from LG, Samsung, and Apple companies, and four colors were researched (red, yellow, green and blue) to both polyester and wool test fabrics for color analysis though color measuring instruments. The results from the spectrophotometer indicated that the color coordinate location of smartphone fabric color is similarly distributed regardless of the type of fabric. The Samsung smartphone displays a relatively high color chroma (especially on red-colored fabric) regardless of the type of fabric due to a high color reproduction range. In contrast, the LG smartphone, which has high color temperature, displays high color chroma on the blue colored fabric with a significant color mismatch between the actual fabric color and smartphone fabric color. From the results of this study, issues related to mobile shopping can be addressed through an analysis of the products sold, the smartphone's color representation, and user understanding.

• 복식문화연구
• /
• 제20권3호
• /
• pp.416-429
• /
• 2012

The purpose of this study was to examine the effects of VM components(facade color and show window type) on store image and purchasing intention of fashion stores. The subjects were 428 male and female university students in Daejeon and Chungnam province. The measuring instruments were 6 stimuli manipulated by $3{\times}2$ factorial design of facade color and show window type, and a self-administrated questionnaire consisted of store image, purchasing intention, and subjects' demographic characteristics. The results were as follows. First, facade color mainly affected store image and purchasing intention. White color was preferred as more positive images(pleasurable, comfortable, neat, and modern), and showed higher purchasing intention than brown color. Second, show window type affected some store images. Semi-open type was perceived as more pleasurable image than enclosed type, whereas enclosed type was perceived as more luxurious, neat, and attractive image than semi-open type. However, show window type didn't affect purchasing intention. Third, subject' sex affected store image and purchasing intention. Male subjects perceived more positively on store image and had higher purchasing intention than females. This study suggested that facade color and show window type are important VM components affecting store image and purchasing intention.