• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.320-323
• /
• 2008

In this study the effect of collision model was evaluated in spray field by CFD. A collision is basically the interaction between droplets and criteria of collision is determined by drop Weber number, impact parameter, and drop-size ratio. Early developed collision model considered coalescence and grazing collision with the exchange of momentum. However in experimental research there were bouncing, coalescence, reflexive separating and stretching separating in interaction between droplets. In this study the collision considering such complex phenomena is modeled and was compared with the basic collision model.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.559-564
• /
• 2008

A prediction of binary droplets collision is important in the formation of falling drops and the evolution of sprays. The droplet velocity, impact parameter and drop-size ratio have influence on the interaction of the droplets. By the effect of these parameter, the collision processes are generated with the complicated phenomena. The droplet collision can be classified into four interactions such as the bouncing, coalescence, reflexive separation and stretching separation. In this study, the two-phase flow of the droplet collision was simulated numerically by using the Level Set method. 2D axi-symmetric simulations on the head-on collisions in the coalescence and reflexive separation, and 3D simulation on the off-center collisions in the coalescence and stretching separation were performed. These numerical results showed good agreements with the experimental and analytical results. For tracking the identity of droplets after the collision, transport equation for the volume fraction of the each initial droplet were used. From this, the identities of droplets were analyzed on the collision of droplets having different size.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.381-381
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2027-2031
• /
• 2011

Molecular dynamics simulation is used to study the binary collisions of nanometer-sized droplets of argon in the presence of a surrounding gas. By systematically varying the droplet size, the impact parameter and the velocity of collision, the outcome of such collisions were examined and they can be classified into coalescence, separation and shattering. If one of the colliding droplets is half or less than the other in diameter, a shattering is not possible to occur. The threshold of impact parameter for a given separation was studied by adjusting the Weber number. Overall nanoscale droplets were more likely to coalesce than the macroscopic sized ones due to their high surface-to-volume ratio.

• Journal of ILASS-Korea
• /
• v.13 no.4
• /
• pp.187-192
• /
• 2008

In this study, the mechanisms of binary droplet collision were studied with diesel, ethanol and purified water. The droplet collisions of liquid droplet have been investigated for the same droplet diameter. In order to obtain the digital images of the droplet collision behavior, the experimental equipment was composed of the droplet generating system and the droplet visualization system. The droplets were produced by the vibrating orifice monodisperse generator. The visualization system consisted of a long distance microscope, a light source, and a high speed camera. The outcomes of binary droplet collision can be divided into four regimes, bouncing, coalescence, reflexive separation and stretching separation. The impact angle and the relative velocity of binary droplet are main parameters of collision phenomena, so the transition mechanism of droplet collision can be divided by the impact parameter.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1891-1896
• /
• 2004

The present article proposes a new droplet collision model including the stretching separation regime and the formation of satellite droplets. The new model consists of a several equations to calculate the post-collision characteristics of colliding droplets and satellite droplets. These equations are derived from the energy balance of droplets between before and after collision. For binary collision of water droplets, the new model shows good agreement with experimental data for the number of satellite droplets. Nevertheless, it is thought that, in order to guarantee the generality of the new model, the improvements should be performed to consider the effects of the bouncing and the reflexive separation, which is essential process in the collision of hydrocarbon droplets.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.433-442
• /
• 1998

The removal procedure of particles in the atmosphere was simulated in the saturated and dry conditions to know the effect of the saturated atmosphere on the size distributions of particles. The particles were divided into 5 ranges, 0.0mm, 0.0∼0.65mm, 0.65∼2mm, 2∼10mm and more than 10mm, and the gases were classified into the smallest range for calculation. At the dry condition, particles grew only by the collision -coalescence and were removed by gravitation. The particles in the range of 2.0∼10mm fell mostly at the 30 km distance from the pollutant source because of gravitation. The particles larger than 10 pm were removed at the 10 km distance from the pollutant source because of their gravity. But the particles larger than 10pm appeared again at more than 30km distance. It is considered that they have been grown during the smaller particles had been advected and diffused at that distance, and it needed about 1 hour from the moment of release. At the saturated condition, particles grew by both the collision-coalescence and condensation. The model showed that the condensation makes more number of particles larger than 10mm and then the particles were removed due to their large gravity. Only a few particles existed at the range of 0.65∼10mm and larger thats 10mm. It is concluded that the saturated atmosphere is effective on removing PM-10.

• Journal of ILASS-Korea
• /
• v.11 no.2
• /
• pp.75-80
• /
• 2006

The present article proposes a new droplet collision model including the stretching separation regime and the formation of satellite droplets. The new model consists of several equations to calculate the post-collision characteristics of colliding droplets and satellite droplets. These equations are derived from the energy balance of droplets between before and after collision. For binary collision of water droplets, the new model shows good agreement with experimental data far the number of satellite droplets.

• Journal of ILASS-Korea
• /
• v.5 no.4
• /
• pp.12-32
• /
• 2000

The recent trends in numerical simulation of various spray phenomena are reviewed in this article. Major subtopics are atomization/breakup, collision/coalescence, wall collision, interfacial transfer, droplet dispersion, two-phase injection and spray combustion. Each submodel has been under continuous refinement and validation against more extensive data base by advanced laser diagnostic techniques. Most uncertainty in current spray simulations come from these physical submodels, not from excessive computational constraints.

• Journal of computational fluids engineering
• /
• v.11 no.3 s.34
• /
• pp.14-21
• /
• 2006

A numerical simulation of the binary collision dynamics of water drops for size ratios of 1 and 0.75, for the Weber number range of 5 to 100, and for all impact parameter is reported. Two different types of separating collisions, namely reflexive and stretching separations, are identified. A numerical method is based on a fractional-step method with a finite volume formulation and the interface is tracked with Volume of Fluid(VOF) method, including surface tension. Numerical results for size ratios 1 and 0.75 are reasonablely compared with Ashgriz and Poo's experimental results.