• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.918-927
• /
• 2022

본 연구의 목적은 과거 12년(2010~2021년)간 발생한 상선의 충돌사고 668건을 조사하여 충돌의 원인요인을 조사하고 이를 통계적으로 분석하여 항해사의 인적과실 예방 충돌회피(HEPCA) 모델을 제안하는 것이다. 중앙해양안전심판원의 통계연보 및 충돌사건 재결서를 조사하여 상선의 충돌 원인요인 데이터를 수집하고 통계분석 도구인 SPSS를 이용하여 빈도분석을 수행하였다. 1단계 분석으로 상선 충돌사고 668건을 대상으로 충돌원인을 분석하였고, 2단계 분석에서는 식별된 최대빈도 원인요인을 세부적으로 분석하였다. 분석결과, 충돌원인은 항해사의 인적과실이 98 %인 것으로 식별되었으며, 빈도 높은 요인 순서는 경계소홀 > 항행법규위반 > 조선 부적절 순이었다. 경계소홀의 원인 요인은 주로 상대선 초인 후 지속감시 소홀이었으며 상대선박의 존재를 인식하지 못한 원인은 주로 당직시간에 다른 작업을 한 요인이었다. 분석결과를 적용하여 인적과실 예방을 위한 HEPCA 모델을 제안하였고, 이를 재결서의 충돌사건에 적용해보았다. 본 연구결과는 해기사 교육기관 및 실무에서 항해사의 인적과실로 발생하는 충돌사고를 방지하기 위한 교육 자료로 활용이 가능할 것으로 기대된다.

• Journal of Communications and Networks
• /
• 제14권1호
• /
• pp.34-39
• /
• 2012

Collisions between tags greatly reduce the identification speed in radio frequency identification (RFID) systems and increase communication overhead. In particular for an active RFID system, tags are powered by small batteries, and a large number of re-transmissions caused by collisions can deteriorate and exhaust the tag energy which may result in missing tags. An efficient collision-free arbitration protocol for active RFID systems is proposed in this paper. In this protocol, a new mechanism involving collision detection, collision avoidance, and fast tag access is introduced. Specifically, the pulse burst duration and busy-tone-detection delay are introduced between the preamble and data portion of a tag-to-reader (T-R) frame. The reader identifies tag collision by detecting pulses and transmits a busy tone to avoid unnecessary transmission when collision occurs. A polling process is then designed to quickly access the collided tags. It is shown that the use of the proposed protocol results in a system throughput of 0.612, which is an obvious improvement when compared to the framed-slotted ALOHA (FSA) arbitration protocol for ISO/IEC 18000-7 standard. Furthermore, the proposed protocol greatly reduces communication overhead, which leads to energy conservation.

• 천문학논총
• /
• 제11권1호
• /
• pp.125-137
• /
• 1996

The collision of two particles in the accretion disk may lead to be a mechanism of heat generation. By using hydrodynamic equations, the mean free path, the collision frequency and the deflection angle due to the collision of the particles are derived as a function of the mass accretion rate. The mean free path seems to be a smaller fraction compared to the dimension parameter of the system. The radiative flux in the disk is obtained under the influence of the collision of the particles.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.253-259
• /
• 2008

RFID is a generic term for technologies which use RF waves to identify, track, or categorize any object. A radio frequency identification (RFID) reader recognizes objects through wireless communications with RFID tags. Tag collision arbitration for passive tags is a significant issue for fast tag identification due to communication over a shared wireless channel. One of the research areas in RFID system is a tag anti-collision protocol. In this paper, various anti-collision protocols are discussed. The pros and cons of different anti-collision protocols are compared with each other and their performance is analyzed and the better performance anti-collision protocol is suggested.

• 대한전자공학회논문지TC
• /
• 제47권1호
• /
• pp.99-108
• /
• 2010

RFID(Radio Frequency IDentification) 기술은 RF신호를 사용하여 물품에 부착된 전자태그를 식별하는 비접촉 기술이다. RFID 리더의 식별 영역 내에 여러 개의 태그가 있는 경우 이들 사이의 충돌(collision)이 발생되기 때문에 이들을 식별할 수 있는 메커니즘이 필요하다. 다중 태그 식별 문제는 RFID 기술 중에서도 핵심이며, 이 문제는 충돌방지(anti-collision) 알고리즘을 통하여 해결할 수 있다. 하지만 RFID 시스템의 또 다른 문제는 정보보호이다. 태그는 리더의 쿼리에 매우 쉽게 응답하기 때문에 태그의 정보 노출에 따른 사용자 프라이버시 침해 문제가 발생한다. 이러한 점에서 RFID 기술은 외부로부터 스니핑(sniffing)에 매우 취약하다. 본 논문에서는 기존에 제안된 트리 기반 메모리래스 알고리즘인 트리-워킹 알고리즘, 쿼리 트리알고리즘, 향상된 쿼리 트리 알고리즘 등의 보안 견고성에 대하여 살펴본다.

• 한국통신학회논문지
• /
• 제28권6B호
• /
• pp.544-552
• /
• 2003

본 논문에서는 단일 채널에서 동작하는 무선인식 시스템에서 다수의 트랜스폰더가 접근할 때 데이터 충돌을 방지 할 수 있는 명령 코드 충족 알고리즘을 제안하였다. 기존에 사용되고 있는 시간 영역 방법에서는 무조건 충돌을 발생시키지만, 명령 코드 충족 알고리즘은 명령 코드를 충족해야만 데이터를 송신할 수 있게 구현함으로써 데이터 충돌을 방지하였다. 만약 트랜스폰더에서 데이터를 송신하는 중 또 다른 트랜스폰더가 데이터를 송신한다 면 인식거리의 차이에 의해서 데이터 도착속도가 틀려짐을 이용하여 원하는 데이터만 수신할 수 있게 하였다. 제안된 명령 코드 충족 알고리즘을 적용하기 위하여 13.56MHz대역의 무선인식 시스템을 제작하여 1비트 데이터 전송 시간인 14$\mu\textrm{s}$ 차이를 확보함으로써 데이터 충돌 방지하고 그로인한 데이터 손실이 방지됨을 실험을 통하여 입증하였다.

• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.319-324
• /
• 2018

The collision problem is one of the design factors that must be carefully considered for the risk of collision occurring during the operation of ships and offshore structures. This paper presents the main results of the ship collision study, and its main goal is to analyze potential crash scenarios that may occur in the FLNG (Floating Liquefied Natural Gas) considering the likelihood and outcome. Consideration being given to vessels visiting the FLNG and surrounding vessels navigating around, such as functionally supported vessels and offloading carriers. The scope includes vessels visiting the FLNG facility such as in-field support vessels and off-loading carriers, as well as third party passing vessels. In this study, based on QRA (quantitative risk assessment), basic research methods and information on collision are provided. Based on the assumptions and methodologies documented in this study, it has been possible to clarify the frequency of collision and the damage category according to the type of visiting ship. Based on these results, the risk assessment results related to the collision have been derived.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.63-72
• /
• 1995

The mean velocity gradient, G, has been used as a principal design and operation parameter for flocculation unit. This paper questions that significance. The physical and qualitative meaning of collision efficiency factors of each transport mechanism (Brownian motion, fluid shear, and differential sedimentation) are reviewed. The overall collision frequency function is calculated by summing up the collision frequency function of each mechanism. In the collision of two particles of different size, a diagram showing the dominant region in which each mechanism is important is developed and the meaning of the diagram is discussed. The primary ramification of this curvilinear, heterodisperse approach is that G is found to be not nearly so important. Previous experimental work in which the role of G has been examined is reviewed in light of this finding.

• 상하수도학회지
• /
• 제9권3호
• /
• pp.65-77
• /
• 1995

The kinetics of flocculation of heterodisperse suspension like those in water treatment plants and natural water system are usually described by the Smoluchowski equation, which incorporates collision frequency functions for particle collisions by Brownian motion, fluid shear, and differential sedimentation. These collisionfrequeney functions have been based on a rectilinear view of collisions, i.e., one that ignores short-range forces and changes in fluid motion as particles approach one another. In this research, a curvilinear approach, i.e., one that accounts for hydrodynamic forces and particle interaction in the collision of two different size particles is developed. Collision efficiency factors of each mechanism can be calculated by trajectory analysis (fluid shear and differential sedimentation) or the solution of diffusion equation (Brownian motion). The results are presented as a set of corrections to the rectilinear collision frequency functions for each mechanism.