• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2017년도 춘계 종합학술대회 논문집
• /
• pp.101-102
• /
• 2017

This study of purpose was to evaluate the changes in hands and feet temperature by applying massage and paraffin bath.. The subject of this study was 30 university healthy students. Subjects were divided into paraffin bath group and massages group. The digital infrared thermographic imaging was used for thermographic analysis. The visual analog scale was used for subjective information about the degree of cold sensitivity and cold stress test was used for analyzing the temperature recovery rate. After the interventions showed that temperature difference of the right hand and temperature difference of the left hand are less in the paraffin group than the massage group. When applied paraffin bath and massage to the cold hypersensitivity patient the massage group showed difference in the visual analog scale and the paraffin group showed difference in the temperature of the right hand, left hand, left foot and in the visual analog scale. Paraffin bath treatment seems to be useful to patients with cold hypersensitivity on hands and feet.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.350-353
• /
• 2009

In the present study, the effect of initial microstructure, cold reduction ratio, and annealing temperature on the spherodization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $800^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ for 5 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure. Cold rolling was conducted on the sheets of fine pearlite by reduction ratios of 20, 30, and 40% and heat treatment for spheroidization was carried out at 600 and $720^{\circ}C$ for the various time intervals from 0.1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권1호
• /
• pp.65-68
• /
• 2004

The purpose of the present study was to examine the efficacy and mechanism of fraction IV cold ethanol fractionation and pasteurization (60$^{\circ}C$ heat treatment for 10 h), involved in the manufacture of albumin from human plasma, in the removal and/or inactivation of the hepatitis A virus (HAV). Samples from the relevant stages of the production process were spiked with HAV and the amount of virus in each fraction then quantified using a 50% tissue culture infectious dose (TCID$\_$50/). HAV was effectively partitioned from albumin during the fraction IV cold ethanol fractionation with a log reduction factor of 3.43. Pasteurization was also found to be a robust and effective step in inactivating HAV, where the titers were reduced from an initial titer of 7.60 log TCID$\_$50/ to undetectable levels within 5 h of treatment. The log reduction factor achieved during pasteurization was $\geq$4.76. Therefore, the current results indicate that the production process for albumin has sufficient HAV reducing capacity to achieve a high margin of virus safety.

• 소성∙가공
• /
• 제12권4호
• /
• pp.364-369
• /
• 2003

Non-heat treated steels are attractive in the steel-wire industry since the spheroidization and quenching-tempering treatment are not involved during the processing. However, non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, three different steels such as dual phase steel, low-Si steel, and ultra low carbon bainitic steel were used to study their mechanical properties and the cold formability. The cold formability of three steels was investigated by estimating the deformation resistance and the forming limit. The deformation resistance was estimated by calculating the deformation energy, and the forming limit was evaluated by measuring the critical strain revealing crack initiation at the notch tip of the specimens. The results showed that deformation resistance was the lowest in the low-Si steel, and the forming limit strains of ultra low carbon bainitic steel and low-Si steel were higher than that of commercial SWRCH45F steel.

• 대한한의학방제학회지
• /
• 제13권2호
• /
• pp.169-192
• /
• 2005

This report describes the remedial fields, symptoms, pathlogy, dosage, prescriptional constitution of 79 studies to the use of Herba Ephedrae main blended prescriptions from dongeubogam. The following conclusions were reached through investigations on the prescriptions that use Herba Ephedrae as a key ingredient Herba Ephedrae blended prescriptions are utilized for 26 therapeutic purposes, for example, in symptoms of cough, cold, wind. In particular, 20.2% of the prescriptions appear in the chapter of cough. Prescriptions that utilize Herba Ephearae as the main ingredient are used in the treatment of 47 different types of diseases, for example, in the treatment of wind-cold pathogen, cold, wind, exogenous febrile disease etc. Herba Ephedrae is most widely used in six pathogenic factors such as wind, cold, dampness, heat. The actual amount of Herba Ephedrae blended has ranged at a wide variety of amounts from 1 don to 2 don. It is widely applied with base prescriptions such as Mahwang-tang, Samyo-tang, Mahwangbujasesin-tang, Mahwangkanghwal-tang.

• 한국잠사곤충학회지
• /
• 제36권1호
• /
• pp.1-7
• /
• 1994

용천뽕에 개량뽕을 교배하여 채종한 종자가 발아하는 생장점에 0.2% colchicine용액을 적하처리하여 4배성인 4원뽕 11호, 12호, 13호 및 14호를 창성하였으며 그 주요특성은 다음과 같다. 1. 이른봄의 발아개엽기는 개량뽕과 비슷한 중뽕이다. 2. 잎은 대형 또는 중형의 심장형이며 표면은 강강감이 있으며, 잎두께, 잎면적중, 수분율이 2배체에 비하여 증가 되었다. 3. 2배체인 교배모품종에 비하여 평균가지길이는 짧고 마디사이길이와 측지수는 두 모품종의 중간정도이었다. 4. 가지끝마름율은 1.6~2.5%로서 강한 내동성(cold hardiness)을 나타내고 있으므로 내동성이 강한 3배체 육성소재로 유망하다.

• 혜화의학회지
• /
• 제5권1호
• /
• pp.215-231
• /
• 1996

In the literatual study on the hiccup, the results were as follows; 1. Hiccup is usually named as Hae yek, Hyel yek, Yel yek. 2. The cause of hiccup are stomach cold, rising of stomach fire, stagnation of vital energy and stagnation of phlegm, yang deficiency of spleen and kideny, deficiency of stomach-yin, or mental disorder due to the stagnation of phlegm, dyspepsia, depressed vital energy. 3. The treatment of hiccup are dispel cold by warming the middle warmer due to stomach cold, expel the heat-evil to loose hollow-organ due to rising up of stomach yin, regulate vital energy and dissipate phlegm due to stagnation of vital energy and stagnation of phlegm, warm and recuperate both of spleen and kidney due to spleen and kidney yang deficiency, nourish the stomach to promote the production of body fluid due to deficiency of stomach yin. 4. The prescription of hiccup are frequently used Gamchogungangtang Gangwhalbujatang Leejungtang Guelpigungang-tang due to stomach cold, Sosihotang Daesihotang Sojaganggitang due to rising up of stomach fire, Sunbokdaejasuktang due to stagnation of vital energy an dstagnation of phlegm, Bojungikgitang Goakhwanganwyisan Samsoeum due to spleen and kidney yang deficiency, Jaeumganghawtang Daebohoan due to deficiency of stomach yin, Hwanglyenjuklyetang Leejintang Guelpitang due to the stagnation of phlegm, Daewhajungeum due to dyspepsia, Mokhwangjogisan due to depressed vital energy.

• 소성∙가공
• /
• 제32권6호
• /
• pp.329-334
• /
• 2023

The process of heat treatment in cold forging is an essential role in enhancing mechanical properties. However, it relies heavily on the experience and skill of individuals. The aim of this study is to predict hardness using machine learning to optimize production efficiency in cold forging manufacturing. Random Forest (RF), Gradient Boosting Regressor (GBR), Extra Trees (ET), and ADAboosting (ADA) models were utilized. In the result, the RF, GBR, and ET models show the excellent performance. However, it was observed that GBR and ET models leaned significantly towards the influence of temperature, unlike the RF model. We suggest that RF model demonstrates greater reliability in predicting hardness due to its ability to consider various variables that occur during the cold forging process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.269-273
• /
• 2003

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment. However, Non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the drawing process. In this study, Dual-Phase Steels were studied as candidate materials for non-heat treated steels, which have different martensite morphologies and volume fractions obtained through heat-treatment of intercritical quenching (IcQ), intermediate quenching (ImQ) and step quenching (SQ). The mechanical properties of DP steels were measured by tension and compression tests. Also, the cold formability of three DP steels which have similar tensile strength value was investigated by estimating the deformation resistance and the forming limit. The deformation resistance which is important factor in determining die life was estimated by calculating the deformation energy. And the forming limit was estimated by measuring the critical strain revealing crack initiation at the notch tip of the specimens.

• 대한약침학회지
• /
• 제9권3호통권21호
• /
• pp.89-95
• /
• 2006

Objectives : This study is to research if any acupucture points are more effective, when Mahuang-chuanwu herbal acupucture is applied to the theatment of obesity. Methods : We searched oriental medical literatures and papers. Results : 1. Mahuang-chuanwu Herbal Acupuncture consists of distilled water of Ma-hunag and Chuan-wu, and it has the following effects : channel-warming, cold-dispering and eliminating damp. therefore it is applied to the treatment of obesity. 2. The acupuncture points, which have effects of channel-warming, cold-dispering and eliminating damp, are six : Kwanwon(Cv4), Kihae(CV6), Changmun(Liv13), Chok-samni(St36), Chung-wan(Cv12), Chonchu(St25). And Kwanwon(Cv4), Kihae(CV6), Changmun(Liv13), Chung-wan(Cv12), Chonchu(St25) locate on the abdomen. 3. Morbidly obese people, especially those in which their bellies are very large, are so because often the binding properties of the Taemaek(G26) have weakend. therefore Taemaek(G26) will be more effecive than Changmun(Liv13) that locate on right below the free end of the 11th rib, at the lateral side of the chest. 4. Mahuang-chuanwu Herbal Acupuncture will be most effective on the treatment of obesity with cold and damp as additional treatment, when it is injected into Kwanwon(Cv4), Kihae(CV6), Chonchu(St25), Taemaek(G26).