• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.10
• /
• pp.832-839
• /
• 2007

The geometry and dimensions of an expansion chamber are decisive factors in thermal puffer plasma chamber designs. Because they together dominate the temperature and speed at which the cooling gas from the chamber flows back through a flow channel to the arcing zone for the successful interruption of fault currents. In this study, we calculated the flow and mass transfer driven by arc plasma, and investigated the effects of a flow guide installed inside a thermal puffer plasma chamber. It is found that the existing cold gas of the chamber mixes with hot gases entrained from the arcing zone and is subjected to compression due to pressure build-up in the chamber. The pressure build-up with the flow guide is larger than that without due to a vortex which rotates clockwise around the chamber center. By the reverse pressure gradient, the mixing gas of the chamber flows back out for cooling down the residual plasma near current zero. In the case with the flow guide, the temperature just before current zero is lower than that without, and the Cu concentration with high electrical conductivity is also less than that without the flow guide.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.53-61
• /
• 2016

Purpose - The production efficiency of agricultural crops has been the subject of numerous studies in the field of agricultural economics. This study examines the production efficiency of emerging vineyards in the 14 northern U.S. states and aims to understand raw input and managerial factors affecting the grape production with focusing on the effect of farm size. Research design, data, and methodology - Using a unique survey dataset that was collected from 176 vineyards in 2012, we employed data envelopment analysis (DEA) for estimation of production efficiency in individual vineyards. Production efficiency is regressed on various input and managerial covariates to understand factors influencing the productivity. Results - Although there exists positive correlation between the farm size and productivity of vineyards in Northern U.S. states, we find negative relationship when the farm size is instrumented by the additional farm size expansion indicator. The negative effect is more pronounced for the recently established vineyards. Conclusions - This study suggests that there needs to be adequate managerial improvements for emerging vineyards in northern states for the achievement of increased productivity.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.975-980
• /
• 2001

Like composite material. the coil winding pack of the KSTAR (Korea Superconducting Tokamak Advanced Research) consist of multiphase element such as metallic jacket material for protecting superconducting cable, vacuum pressurized imprepregnated (VPI) insulation, and corner roving filler. For jacket material, four CS (Central Solenoid) Coils, $5^{th}$ PF (Poloidal Field) Coil, and TF (Toroidal Field Coil) use Incoloy 908 and $6-7^{th}$ PF coil, Cold worked 316LN. In order to analyze the global behavior of large coil support structure with coil winding pack, it is required to replace the winding pack to monolithic matter with the equivalent mechanical properties, i.e. Young's moduli, shear moduli due to constraint of total nodes number and element numbers. In this study, Equivalent Young's moduli, shear moduli, Poisson's ratio, and thermal expansion coefficient were calculated for all coil winding pack using Finite Element Method.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.51-57
• /
• 2013

Residual stress caused in the weldments with high restraint force are often observed during welding in the weldments of Inner and outdoor materials or radial tanks. The reason is that quantitative analysis about thermal stresses during laser welding is lacking for this weldments. To verify Finite Elements Method (FEM) theory, the temperature was measured with thermocouple in a real time in this paper. Also analysis of the thermal stress for welding condition is performed by Comsol program package on various welding condition in SCP1-S butt welding. The principal stress in laser welding process is seen through the width direction. Also, it was confirmed that a change in base metal by thermal expansion made the stress in width direction stronger. Base metal close to the weld bead as the process progresses to the tensile stress in the compressive stress was varied. It was shown that the change of stress was quantitative from the bead at a certain distance.

• The Korean Journal of Health Service Management
• /
• v.6 no.2
• /
• pp.193-200
• /
• 2012

The purpose of this study was to research the opinion and acknowledgement about the clinical chronic disease care system subject to Medical Practitioners that copied the internal medicine and family medicine as a treatment subject and was fulfilled in the purpose of providing a basic data for the improvement and stable establishment of the chronic disease care system and the high blood pressure and diabetes mellitus patient's promotion of health. Results from the research the internal medicine was 79% and the subject's average age was 52.3 years, the proportion that the high blood pressure and the diabetes mellitus took was average 28% and the interest about the system was 65.9%. In the chronic disease care system expansion status the opposition was 75.7%, and the detail field knowledge level was 56.9%. In the opinion field about the system, all fields were shown negative. The chronic disease care system is an important government policy enforcing purposed to effectively manage the yearly increasing chronic disease, but the due to the cold attitude of Medical Practitioners that must actively accept it, the stable establishment of the system is being concerned. Therefore even if it's a good policy if it cant gain the support and agreement of the accepter, in the future when trying to implement a system there should be no idleness in the effort to gain cooperation and understanding to relevant involved ones.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1323-1332
• /
• 2009

The IHX (Intermediate Heat eXchanger) for a pool-type SFR (Sodium-cooled Fast Reactor) system transfers heat from the primary high temperature sodium to the intermediate cold temperature sodium. The upper structure of the IHX is a coaxial structure designed to form a flow path for both the secondary high temperature and low temperature sodium. The coaxial structure of the IHX consists of a central downcomer and riser for the incoming and outgoing intermediate sodium, respectively. The IHX of a pool-type SFR is supported at the upper surface of the reactor head with an IHX support structure that connects the IHX riser cylinder to the reactor head. The reactor head is generally maintained at the low temperature regime, but the riser cylinder is exposed in the elevated temperature region. The resultant complicated temperature distribution of the co-axial structure including the IHX support structure may induce a severe thermal stress distribution. In this study, the structural feasibility of the current upper support structure concept is investigated through a preliminary stress analysis and an alternative design concept to accommodate the IHTS (Intermediate Heat Transport System) piping expansion loads and severe thermal stress is proposed. Through the structural analysis it is found that the alternative design concept is effective in reducing the thermal stress and acquiring structural integrity.

• Food Science and Preservation
• /
• v.3 no.1
• /
• pp.61-75
• /
• 1996

Apple is most favorable fruit in Korea, and apple farmland has been increased before and after the agreements of Uruguay Round and apple is considered as one of strategic agricultural products. Especially expansion of apple farmland is concentrated in Kyungpook region because of the suitable climate and its market share is about 70 percents in 1992. The marketing channels of apples of Kyungpook region are widely classified by merchant, agricultural or horticultural co-op and large scale farmer's. Among them market share of merchant's occupy over 65 percent. In marketing margins, commercial profit is higher than cost in total marketing margins and, assembler and retailer's margin is not less than wholesaler's. The fluctuation of the price of apple is high in year. The marketing problems of apples are several, first, complex marketing channels, secondly, the high percentage of market share by growing district assembler, thirdly, low rate of package and quality standardization, finally, concentration of shipment of apple because of the shortage of apple processing, storage and marketing facilities, of newly produced apples. In conclusion, to increase apple grower's income with the stabilization of supply and quality upgrade, the improvement measures of marketing system are as follows, first, government level's support in marketing facilities and mechanism, secondly, the increment of supply by grower's cooperatives, thirdly, the establishment of a serious of marketing system to increase the efficiency, fourthly, the establishment of cold-chain system and quality standardization of apple, finally, production of various kinds of apple processing goods.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.46.2-46.2
• /
• 2013

The neutral component of the interstellar medium (ISM) is segregated into the cold neutral medium (CNM) and warm neutral medium (WNM) as a result of thermal instability. It was found that the CNM--WNM evaporation interface, across which the CNM undergoes thermal expansion, is linearly unstable to corrugational disturbances, in complete analogy with the Darrieus-Landau instability (DLI) in terrestrial flames. To explore dynamical consequences of the DLI in the ISM, we perform a linear stability analysis of the DLI including the effect of thermal conduction as well as nonlinear hydrodynamic simulations. We find that the DLI is suppressed at short length scales via heat transport. The linear growth time of the fastest growing mode is proportional to the square of the evaporation flow speed of the CNM relative to the interface and is typically >10 Myr. In the nonlinear stage, perturbations grow into cusp-like structure protruding toward the WNM, and soon reach a steady state where the evaporation rate is increased by a factor of 2 compared to the initial state. We demonstrate that the amplitude of the interface distortion and enhancement in evaporation rate are determined primarily by the density ratio between the CNM and WNM. Given quite a long growth time and highly subsonic velocities at saturation, the DLI is unlikely to play an important role in the ISM dynamics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.115-118
• /
• 2010

2 Types of heater (Vitiated Type, Clean Air Type) in order to increase the temperature for a test are used for industry. In this report, large capacity clean air type heater was designed. Heater capacity and LNG consumption rate can be calculated by the air mass flow and heater inlet/outlet temperature. The heater is composed by Burner, Furnace, Heat Exchanger, and Stack. The hot air from the burner and cold air from the tube inlet exchange their heat indirectly in the heat exchanger, so the desired temperature can be achieved at the exit of the tube.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.202-204
• /
• 1994

Nowadays Perovskite $La_{1-x}Sr_xCoO_3$ is a preferred cathode material in the construction Solid Oxide Fuel Cell (SOFC). The $La_{1-x}Sr_xCoO_3$ with Sr contents ranging from X=0.0 to X=1.0 were prepared by a citrate method. All samples were examined by X-ray powder diffraction. The samples used for measuring thermal expansion were prepared as pellets by cold pressing and subsequent sintering in air at $1200^{\circ}C$ for 5 hours. To measure the sub-product of $La_{1-x}Sr_xCoO_3$ with YSZ, where coating films were sintered at $1200^{\circ}C$ for 5 hour.