• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.3
• /
• pp.240-246
• /
• 2006

This paper performed to investigate on vertical temperature distribution, effective draft temperature (ETD) and PMV (Predicted Mean Vote) in the classroom, which is located YangSan city (Kyungsangnam-Do), Korea, is equipped with ceiling unit. The vertical temperature difference between F.L+10 cm (ankle) and F.L+120 cm (neck) of a measuring point which is adjacent corridor in the classroom showed about $1^{\circ}C$ but of measuring point which is adjacent outdoor expressed up to $4^{\circ}C$, The effective draft temperature (ETD) is -2.3 and -0.52 and 0.67 at near ceiling unit but is 1.2 and 3.3 at far from ceiling unit. The PMV of total classroom showed the range of 'Cold' and 'Slightly Cold.' Therefore, to achieve comfort condition in the classroom is equipped with ceiling unit, the location of ceiling unit and discharge angle and discharge distance from ceiling unit are very important elements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.216-217
• /
• 2006

A common problem in many fields of cryogenic power engineering is to apply high voltage to cold parts of superconducting equipment. In many of these cases a bushing provides electrical insulation for the conductor which makes the transition from ambient temperature to the cold environment. The cryogenic high voltage bushing for the 154kV, 100MVA high temperature superconducting(HTS) transformer is described. The bushing is energized with the line-to-ground voltage between the coaxial center and outer surrounding conductors, in the axial direction there is a temperature difference from ambient to about 77 K. For the insulation design of cryogenic bushing, the arrangement of condenser cone and electrical insulation characteristics of GFRP, Air, $LN_2$ and $GN_2$ were discussed in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.249-254
• /
• 2019

A Digital Transmitter/Receiver Module(DTRM), which is an essential part in active phased-array radar systems, generates a high heat density, and needs to be properly cooled for stable operation. A tile-type DTRM that is a stacking structure of multi-layer components was modeled with simplification and heat dissipation characteristics of the DTRM model were studied using computational fluid dynamics(CFD) simulations. Most of the heat was dissipated by the heat conduction through the cold plate, but the heat transfer by the forced convection on top of the DTRM also was found to play an important role in the thermal management. Under the given conjugated heat transfer environment, the DTRM was confirmed to secure a stable operating temperature range.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.501-512
• /
• 2019

The seasonal effects on the biostability of drinking water were investigated by comparing the seasonal variation of assimilable organic carbon (AOC) in full-scale water treatment process and adsorption of AOC by three filling materials in lab-scale column test. In full-scale, pre-chlorination and ozonation significantly increase $AOC_{P17\;(Pseudomonas\;fluorescens\;P17)}$ and $AOC_{NOX\;(Aquaspirillum\;sp.\;NOX)}$, respectively. AOC formation by oxidation could increase with temperature, but the increased AOC could affect the biostability of the following processes more significantly in winter than in warm seasons due to the low biodegradation in the pipes and the processes at low temperature. $AOC_{P17}$ was mainly removed by coagulation-sedimentation process, especially in cold season. Rapid filtration could effectively remove AOC only during warm seasons by primarily biodegradation, but biological activated carbon filtration could remove AOC in all seasons by biodegradation during warm season and by adsorption and bio-regeneration during cold season. The adsorption by granular activated carbon and anthracite showed inverse relationship with water temperature. The advanced treatment can contribute to enhance the biostability in the distribution system by reducing AOC formation potential and helping to maintain stable residual chlorine after post-chlorination.

• Journal of ILASS-Korea
• /
• v.27 no.3
• /
• pp.134-143
• /
• 2022

When a recess is applied to a swirl coaxial injector that uses liquid and gas propellants, a self-pulsation phenomenon in which the spray oscillates at regular intervals may occur. The phenomenon is caused by the interaction between the liquid and gas propellants inside the injector recess region. The propellants' kinetic energies are expected to affect significantly the spray oscillation. Therefore, cold-flow tests using helium as a gas-simulating propellant were conducted and compared with the results of the previous study using air. Dynamic pressure was measured in the injector manifold and frequency characteristics were investigated through the fast Fourier transform analysis. In the experimental environment, the helium density was about seven times lower than the air density. Accordingly, the intensity of pressure fluctuations was confirmed to be greater when air was used. At the same kinetic energy condition, the perturbation frequency was almost identical in the low flow rate conditions. However, as the flow rate increased, the self-pulsation frequency was higher when helium was used.

• Animal Systematics, Evolution and Diversity
• /
• v.40 no.1
• /
• pp.47-67
• /
• 2024

The bryozoan assemblage from Seogwipo Formation in Jejudo yielded 33 taxa, including seven cyclostomes and 26 cheilostomes. It is the first fossil bryozoans described from the entire Korean peninsula. Five species, Callopora inermis, Tegella horrida, Celleporaria reflexa, Porella rotundirostris, and Rhynchozoon obliquimandibulatum, are new to the Korean bryozoan fauna as both in the Recent and fossil records. Tegella horrida, Celleporella reflexa, Porella donoghueorum, and Leischara subgracilis are notably cold-water species. This suggests that the Seogwipo Formation was primarily deposited in shallow water environment, subject to changesinfluenced by warm-water masses and temporarily impacted by cold currents. Only 33 species from the Seogwipo Formation in Korea, are very poor because the Seogwipo Formation is the only Pleistocene marine deposit in the Korean Peninsula. Eight species previously unknown as fossils worldwide, Tubulipora perforata, Puellina paracaesia, Reginella multipora, Celleporella reflexa, Exochella cryptodontia, Suhius cf. rubescentis, Cheiloporina cf. haddoni, and Jodoella koreensis are found in the Seogwipo Formation. This study is meaningful as it reports the first fossil assemblage of bryozoans from the Korean peninsula.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.48 no.2
• /
• pp.86-97
• /
• 2024

Alkaline- or salt-assisted extractions have been widely used to extract edible insect proteins, however, there is a need for extraction techniques that balance cost-efficient production as well as preserving the protein properties. Mealworm proteins (Tenebrio molitor larvae) were extracted using three different extraction methods-alkali (AMP), salt (SMP), and water (WMP)-and then physicochemical and techno-functional properties were examined. AMP had high yield, protein, and amino acid contents, whereas WMP had high moisture, ash, and fat contents. SDS-PAGE showed a wide range of molecular weights in WMP whereas mostly low molecular weights were observed in AMP and SMP. AMP had poor protein solubilities compared to SMP and WMP across all pHs. AMP had enhanced water-holding capacity and emulsion stability, whereas WMP had improved oil-holding capacity and foaming properties. WMP formed a gel with and without the transglutaminase. The physicochemical and techno-functional properties demonstrated that water-soluble mealworm protein was superior to alkali-and salt-soluble mealworm proteins. Considering the cost efficiency and minimal impact on the environment as well, a cold press juicer could be utilized for mass production of mealworm protein compared to the conventional methods of protein extraction using alkali and salt.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.3
• /
• pp.325-338
• /
• 2024

Interim dry cask storage systems comprising AISI 304 or 316 stainless steel canisters have become critical for the storage of spent nuclear fuel from light water reactors in the Republic of Korea. However, the combination of microstructural sensitization, residual tensile stress, and corrosive environments can induce chloride-induced stress corrosion cracking (CISCC) for stainless steel canisters. Suppressing one or more of these three variables can effectively mitigate CISCC initiation or propagation. Surface-modification technologies, such as surface peening and burnishing, focus on relieving residual tensile stress by introducing compressive stress to near-surface regions of materials. Overlay coating methods such as cold spray can serve as a barrier between the environment and the canister, while also inducing compressive stress similar to surface peening. This approach can both mitigate CISCC initiation and facilitate CISCC repair. Surface-painting methods can also be used to isolate materials from external corrosive environments. However, environmental variables, such as relative humidity, composition of surface deposits, and pH can affect the CISCC behavior. Therefore, in addition to research on surface modification and coating technologies, site-specific environmental investigations of various nuclear power plants are required.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.3
• /
• pp.197-202
• /
• 1991

It is observed that the outbreak of dust storms (yellow sand) from Northern China and Mongolia occurs a few times in April 1988 and 1990. It is found that a dust storm initiated with strong gusty winds after the passage of a cold front, particularly after defrost of the ground surface of a source region in the early spring. According to meteorological chart, satellite images and trajectory analyses, dust clouds invaded Korea in April 1988 and 1990 were landing in the sink area after 2 $\sim$ 4 days travelling for 2,000 $\sim$ 3,000 km from a source region. It was also observed that in the west coast total suspended particulated (TSP) were 100 $\sim$ 200 $\mug m^{-3}$ and sulphates $(SO_4=)$ were 3 $\sim$ 10 $\mug m^{-3}$. These values clearly exceed the concentrations of a background level measured in the Arctic and Atlantic Ocean. Trajectory analyses and meteorological analyses suggest that the high values occurred with prevailing westerly flows coming from anthropogenic sources in China. High concentrations of air pollutants occurred in the backside of an anticyclone and in the area "col".col".uot;.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.64.1-64.1
• /
• 2016

We study the evolution of a late-type galaxy (LTG) in a rich cluster environment by using N-body/SPH simulations. To do that we perform a set of simulations of a LTG falling in a Coma-like cluster and also the LTG colliding with early-type galaxies (ETGs) multiple times in the cluster environment. We use a catalog of the Coma cluster in order to estimate the typical number of collisions and the closest approach distances that a LTG would experience in the cluster. We investigate the cold gas depletion and star formation quenching of our LTG model influenced by the hot cluster gas as well as the hot halo gas of the colliding ETGs.