• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.19-26
• /
• 2006

The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a dual leaf-spring. The materials of the specimens are used as ten kinds along their hardness. In this study, both upper and lower specimens have been used the same materials. Using experimental data, we figured the relationship between wear coefficient and friction coefficient, and the relationship between wear coefficient and friction temperature. Also we combined friction temperature and friction coefficient instead of wear coefficient. We substituted this into wear equation of Archard. The result had been derived a newly wear equation in using dual leaf-spring wear system.

• 한국재난정보학회 논문집
• /
• 제8권2호
• /
• pp.148-157
• /
• 2012

최근 건축물이 대형화, 복잡화되면서 건축물내 거주자의 피난안전성이 관심의 초점이 되고 있다. 국내에서도 주상복합건물을 비롯하여 초고층 건물의 건축이 활성화되고 있는 상황이다. 초고층건물의 경우 화재 발생 시 계단을 통한 피난에 시간이 많이 소요되고 특히, 장애인의 경우 계단을 통한 피난 자체가 불가능할 수 있다. 이에 거주자의 피난에 엘리베이터를 이용하는 방법에 대한 연구가 진행되고 있다. 본 연구에서는 엘리베이터를 피난에 이용하기 위하여 엘리베이터 승강로가 연기에 오염되지 않도록 하는 연구의 일환으로 엘리베이터 승강로에서 엘리베이터 운행 시 엘리베이터와 승강로 사이의 유량계수를 시뮬레이션을 통하여 살펴보았다. 엘리베이터 샤프트의 유량계수는 엘리베이터 피스톤효과를 계산하는 주요 인자로서 본 연구의 결과는 엘리베이터 피스톤 효과에 대한 연구의 기초 데이터로 활용 가능하다. 유량계수 시뮬레이션은 상용 CFD 프로그램인 FLUENT를 이용하여 수행되었으며 시뮬레이션 결과 평균 유량계수 값은 0.93이며, 엘리베이터 샤프트 표면이 매끈하게 모델링되어 있으므로 손실을 고려하여 최종적으로 0.88이라는 유량계수 값을 얻었다. 현장 실험을 통하여 얻은 유량계수 결과값은 0.86으로 본 연구를 통하여 실험 결과 값이 보수적임이 검증되었다. 침투 저항성은 약 80~90%의 성능을 보여 만족할 만한 결과가 나왔다.

• 한국환경과학회지
• /
• 제22권5호
• /
• pp.563-570
• /
• 2013

Roughness coefficient was computed for review of applicability based on measurement of the representative grain diameter reflecting channel characteristics of Han Stream. After field survey, collection of bed material, and grain analysis on the collected bed material, roughness coefficient was computed using representative grain and existing empirical equation for roughness coefficient. Value of roughness coefficient calculated using equation by Meyer-Peter and Muller (1948) was 0.0417 for upstream, 0.0432 for midstream, and 0.0493 for downstream. As a result of comparing the computed roughness coefficient to other empirical equations for review of applicability, the coefficient was larger in Strickler (1923) equation by 0.006. Smaller coefficient was shown by Planning Report for River Improvement Works. Equation by Garde and Raju (1978) was larger by 0.004, and equations by Lane and Carlson (1953) and by Meyer-Peter and Muller (1948) were larger by 0.001. Such precise roughness coefficient is extremely important when computing the amount of flood in rivers to prevent destruction of downstream embankments and property damages from flooding. Since roughness coefficient is a factor determined by complicated elements and differs according to time and space, continued management of roughness coefficient in rivers and streams is deemed necessary.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.29-32
• /
• 2008

In this study, acoustic diffusers were designed as to the ISO method, which measured the random-incidence scattering coefficient of surfaces in a diffuse field. The diffusers which were made of GFRG (Glass Fiber Reinforced Gypsum), consisted of the cubes with different height and width. The height was from 50 to 250 mm and the maximum height was at the center of the diffusers to provide the early reflections. The surfaces were irregularly designed in order to add the lateral reflections. The scattering coefficient of the diffusers was measured in a 1;10 reverberation chamber, but the absorption coefficient was measured in a real scale reverberation chamber. The result of the scattering coefficient was compared to the hemisphere diffusers and the absorption coefficient was compared to ISO 354 data. To validate the measurement results, the scattering coefficient of the diffusers will be measured in a real scale reverberation chamber.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.16-23
• /
• 2004

The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a disc on disc configuration. The materials of the specimens are used as ten kinds along their hardness. In this study, both upper and lower specimens have been used the same materials. Using experimental data, we figured the relationship between wear coefficient and friction coefficient, and the relationship between wear coefficient and friction temperature. Also we combined friction temperature and friction coefficient instead of wear coefficient. We substituted this into wear equation of Archard. The result had been derived a newly wear equation in disc on disc wear system.

• 가정과삶의질연구
• /
• 제33권5호
• /
• pp.1-24
• /
• 2015

The purpose of this study was to investigate the effects of Engel coefficient, Angel coefficient and Schwabe index influencing Household head's life satisfaction. For this study, the data from the 8th analysis of the 2013 Korea Welfare Panel Survey conducted by Korea Institute for Health and Social Affairs were used. For the sample, 903 male Household heads with children under the age of 18, were selected. For statistical analysis, SPSS program (Ver. 21.0) was used. And for statistical methods, frequency and percentile, mean and standard deviation, Pearson's correlation, one way analysis of variance, Duncan's multiple range tests, multiple regression analysis were used. The findings are as follows. First, as a results of analyzing the food costs, education costs and housing costs depending on Income Quintile, the food costs and education costs in the 5th Income Quintile compared with other Income Quintile, were highest. Also, the highest housing cost was in the 2nd Income Quintile, while the least housing cost was in the 1st Income Quintile. Second, by analyzing the differences of Engel coefficient, Angel coefficient and Schwabe index according to Income Quintile, the results show that Engel coefficient and Schwabe index decreases as Income Quintile increases, and Angel coefficient increases as Income Quintile becomes higher. Third, the level of HH's life satisfaction according to Income Quintile, 1st Income Quintile, 2nd Income Quintile, 4th Income Quintile, 3rd Income Quintile, 5th Income Quintile in order, increased. Fourth, as the result of analyzing the influence of Variables related to household and demographics about Engel coefficient, Angel coefficient and Schwabe index, it was shown that the variables effecting Engel coefficient, Angel coefficient, and Schwabe index are age, occupations, Number of workers, House ownership, Income Quintile. Fifth, As a result of analyzing the Variables effecting life satisfaction, especially while Schwabe index is not that significant, Engel coefficient and Angel coefficient are shown to have a significant influence. Therefore, the influence of Food costs and education costs can be confirmed.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.53-61
• /
• 2005

The purpose of this study presents useful data on the choice or development of floor covering from slip viewpoint by examining closely the impact of the changes in sliding experiments due to the wear of floor covering by walk. The result of wear practical test per ten thousand walks enforces some kind of popular floor covering and measure of coefficient of slip resistance as follows: (1) When surface of floor covering is in the state of wet, the degree of wear doesn't affect greatly in slip. (2) When surface of floor covering is in dry and clean state, most floor coverings have the tendency to lower the coefficient of slip resistance with the amount of walk on it. (3) Change in the tendency of slip resistance by wear appeared mainly due to the differences in the state of floor covering and organic floor covering appeared to have great reduction of coefficient of slip resistance than the inorganic ones. (4) According to the result of investigation on changes in tendency of coefficient of slip resistance due to the increase in the number of walk and if two hundred thousand walks were done, regardless of surface shape or kind of site, etc, the safety of floor covering, in slip viewpoint, greatly reduces.

• 복식문화연구
• /
• 제20권4호
• /
• pp.475-484
• /
• 2012

The purpose of this study is to help to prevent daily noises by measuring the noise absorption coefficient of the non-woven fabrics and wallpapers which are commonly used in lining and noise absorption coefficient of lining curtain. Seven types of fiber materials for the interior decoration, one non-woven fabric for the wallpaper linings, and two types of textiles for curtain linings are used as the experimental materials in this study. The noise absorption coefficient of the noise absorbents were measured by using impedance tube. And the thermal transmittance were measured by using thermal transmittance tester. The results of this study are as follows; Observing the noise absorption efficiency of each experimental materials, the combination of fiber materials and linings, the noise absorption efficiency of cotton, polyester and silk were similar and for the experimental materials of flax, rayon, acrylic and nylon were resulted the similar noise absorption efficiency. The result of combination of fiber material and black fabric was highest among the combined linings. For the combination of fiber material and non-woven fabric, double layers of non-woven fabric resulted slightly higher noise absorption coefficient result than single layer of non-woven fabric. The thermal transmittance and the sound absorbents of experimental materials were affected by the thickness, density and layer of air of the experimental materials.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.54-60
• /
• 2016

The valve used in nuclear power plant must be qualified but the limitation of the test facility leads to use the numerical analysis. The flow coefficient is calculated with the consideration of the pressure, velocity and geometry. And the flow coefficient is the important physical property which is prepared using experiment or analysis by valve manufacturer. In this study, the analysis model was made according to ISA 75.02.01 and the mass flow rate and pressure drop ratio was calculated. The model of the expansion factor was applied to the simulation result and the pressure drop ratio at the start of the choked flow in the valve was found. With the simulation result, the consideration was performed that the expansion factor is the important physical property to the system engineer in addition to the flow coefficient.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.75-90
• /
• 2022

In this paper, functionality of soft computing algorithms such as Group method of data handling (GMDH), Random forest (RF), Random tree (RT), Linear regression (LR), M5P, and artificial neural network (ANN) have been looked out to predict the compressive strength of concrete mixed with marble powder. Assessment of result suggests that, the overall performance of ANN based model gives preferable results over the different applied algorithms for the estimate of compressive strength of concrete. The results of coefficient of correlation were maximum in ANN model (0.9139) accompanied through RT with coefficient of correlation (CC) value 0.8241 and minimum root mean square error (RMSE) value of ANN (4.5611) followed by RT with RMSE (5.4246). Similarly, other evaluating parameters like, Willmott's index and Nash-sutcliffe coefficient value of ANN was 0.9458 and 0.7502 followed by RT model (0.8763 and 0.6628). The end result showed that, for both subsets i.e., training and testing subset, ANN has the potential to estimate the compressive strength of concrete. Also, the results of sensitivity suggest that the water-cement ratio has a massive impact in estimating the compressive strength of concrete with marble powder with ANN based model in evaluation with the different parameters for this data set.