• 대한기계학회논문집
• /
• 제10권5호
• /
• pp.618-624
• /
• 1986

본 논문에서는 최근까지 제시된 동방향 성층이상유동의 직접접촉응축열전달계 수에 대한 여러가지 상관관계식들을 검토하고 실험결과와 비교하여 적절한 관계식을 제시하고자 한다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.463-468
• /
• 1997

This paper presents a theoretical approach of the instability criterion from stratified to nonstratified flow in horizontal pipe at cocurrent flow conditions. The new theoretical instability criterion for the stratified and nonstratified flow transition in horizontal pipe has been developed by hyperbolic equations in two-phase flow, Critical flow condition criterion and onset of slugging at cocurrent flow condition correspond to zero and imaginary characteristics which occur when the hyperbolicity of a stratified two-phase flow is broken, respectively. Through comparison between results predicted by the present theory and the Kukita et al.[1] experimental data of pipes, it is shown that they are in good agreement with data.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.459-465
• /
• 1994

Performance of a continuous cocurrent supercritical fluid extraction column for processing of anhydrous milk fat (AMF) was determined. The extract loading increased and the extraction yield decreased as the superficial velocity of AMF increased. The maximum solubility of AMF in $CO_2$ at 4$0^{\circ}C$/3,500 psig was 0.0195g/g. The increase of the carbon dioxide density enhanced the solubility of milk fat and decreased the cholesterol concentration in the extract. Three operation conditions, such as recycle , reflux, and temperature gradient of extraction column, were tested. More short-chain fatty acvids were extracted by the reflux operation . Longchain fatty acids and thehighest ratio fo long-chain unsaturated to saturated fatty acids were also obtained in the raffinate phase with refluex.

• 한국환경보건학회지
• /
• 제22권1호
• /
• pp.57-64
• /
• 1996

The main objectives of this research program were to study the ozonation characteristics of phenol wastewater in the continuous packed colamn reactor(PCR) and the bubble column reactor (BCR) using ozone and to provide the fundamentals of ozonizing the phenol wastewater. Among various influencing factors that affect on phenol decomposition through the oxidation by ozone, contacting method, and ozone flow rate were chosen as reaction parameters. The results were obtained from two different types of contacting methods where the countercurrent flow was more efficient than the cocurrent flow in both the phenol removal efficiency and the ozone utilization efficiency. Furthermore, PCR showed the phenol removal efficiency 1.6 to 3% higher than that of BCR in both contacting methods, as well as the ozone utilization efficiency, suggesting that the countercurrent flow is more efficient than the cocurrent flow. The phenol removal efficiency and the ozone utilization efficiency were reduced in both reactors as the influent ozone flow rate increased. Upon varing flow rate from 0.5l/min to 2.0 l/min by 0.5 l/min, the phenol removal efficiency was reduced approximately from 8.5% to 10.5% and the ozone utilization efficiency was reduced approximately from 6% to 8% in both reactors. The performance of PCR was superior to that of BCR in the aspects of phenol removal and ozone utilization efficiency.

• 공업화학
• /
• 제18권2호
• /
• pp.168-172
• /
• 2007

회분 병류 5단 평형추출에 의해 4종류의 질소고리화합물[indole(In), quinoline(Q), iso-quinoline(iQ), quinaldine(Qu)], 3종류의 2환 방향족화합물[1-methylnaphthalene(1MN), 2-methylnaphthalene(2MN), dimethyl naphthalene(DMN)], biphenyl과 phenyl ether로 구성된 모델 혼합물로부터 In의 분리를 검토했다. 본 연구의 원료로서 사용된 모델 혼합물은 콜타르 유분(유출온도범위: $240{\sim}265^{\circ}C$)을 구성하고 있는 성분 및 조성을 고려하여 작성했다. 추출용매로서는 Formamide 수용액을 사용했다. 4단 평형추출을 통해 In을 99% 이상 회수할 수 있었다. 5단 평형추출을 통해 얻어진 DMN을 기준성분으로한 In의 선택도는 63~118의 범위를 나타냈다. 본 연구를 통해 얻어진 실험적 결과와 이전의 연구결과를 이용하여 콜타르 중에 함유된 In의 분리 및 회수공정을 검토했다.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.295-301
• /
• 2015

폴리설폰 분리막을 이용한 바이오 메탄 가스 농축 특성을 이론적 방법으로 분석하였다. 병류 흐름 분리막 공정의 지배 방정식을 유도하고 Compaq Visual Fortran 6.6 소프트웨어를 이용하여 유도된 비선형 상미분 방정식을 수치 해석하였다. 공급 메탄 몰분율이 0.7로 주어진 전형적 운전조건에서 분리막 입구로부터 출구로 이동하면서 잔류 측 메탄몰분율은 0.7에서 0.76로 증가하였고 공급유량 대비 잔류유량 비는 1에서 0.79로 감소하였다. 공급 메탄 몰분율 또는 공급 압력이 증가할수록 잔류 측 메탄 몰분율은 증가하였다. 분리막 길이를 고정한 상태에서 분리막 면적이 감소하거나 투과 측 압력 대 공급 측 압력 비가 증가함에 따라 잔류 측 메탄 몰분율이 감소함을 확인하였다. 총 투과 분율이 증가할수록 잔류 측 메탄 몰분율은 증가하였고 메탄 회수율은 감소함을 관찰할 수 있었다.

• 멤브레인
• /
• 제16권3호
• /
• pp.204-212
• /
• 2006

이산화탄소에 대한 가소화 안정성 및 이산화탄소/질소의 분리특성이 탁월한 폴리이서술폰(PES)중공사 분리막에 의한 이산화탄소 분리특성을 수치해석으로 알아보고자 하였다. 공정변수에 따른 이산화탄소 분리 거동을 예측하기 위하여 공급 기체와 투과기체가 같은 방향으로 흐르는 병류 흐름에 대한 분리막 공정 지배 방정식을 5차 Runge-Kutta-Verner 방법을 사용하여 Compaq Visual Fortran 6.6 소프트웨어를 이용 공정모사 프로그램을 개발하였다. 개발된 프로그램을 사용하여 수치해석을 수행한 결과, 이산화탄소 투과특성에 영향을 주는 가장 중요한 인자로서 공급 이산화탄소 분압, 투과측과 분리막 내부의 압력비 그리고 공급 기체가 분리막 내부에 머무르는 체류 시간임을 알 수 있었다.

• 설비공학논문집
• /
• 제24권5호
• /
• pp.401-408
• /
• 2012

Volumetric mass transfer coefficient was measured with carbon dioxide and deionized water for the gas-liquid cocurrent slug flow in 2, 5 and 8 mm tubes. Measurement was repeated with and without a vertical section in an experimental setup and entrance effect was found greater for smaller tubes. Volumetric mass transfer coefficient in the vertical section was found generally a strong function of gas- and liquid-phase superficial velocities. 5 mm- and 8 mm-tube data are highly consistent each other but not with 2 mm tube.

• 융복합기술연구소 논문집
• /
• 제1권2호
• /
• pp.25-28
• /
• 2011

Void fraction has been measured for the gas-liquid cocurrent slug flow in 8mm vertical acrylic tube using an optical method. Bubble speed, length and period could be measured with the two sets of laser-infrared sensor modules mounted 25mm apart alongside the tube, which were designed to detect variation of light intensities with a time delay when two parallel laser beams were refracted successively by a passing bubble. It was found that the results were in good agreement with the previous studies in the literature suggesting that the method used in this study were sound and accurate.

• 오토저널
• /
• 제14권6호
• /
• pp.81-90
• /
• 1992

This paper deals with an experimental study on the initial condition of liquid film surface waves disintegration and investigation on the behavior of liquid film surface waves formed by the high speed air flow on the solid plane surface. The authors conducted the qualitative and quantitative study to in vestigate the liquid film flow phenomena, the liquid film disintegration mechanism, and droplet formation process with breaking the liquid film surface wave. The newly devised transparent rectangular test section which has semi-two-dimensional flow at the center of the bottom was introduced to perform the experimental study, and it can generate the uniform thickness liquid film at the bottom. The strobo streak camera was used to obtain the instantaneously transformed photographs. The electronic measuring device was also used to measure the liquid film thickness variation in order to perform the easy and effective analysis of complex flow phenomena in the air-water cocurrent flow.