• 한국식품영양학회지
• /
• 제11권2호
• /
• pp.137-142
• /
• 1998

요오드가 다른 4종류의 기본유(soybean oil, palmolein, coconut oil, corn oil)에 lecithin과 wax를 일정량 첨가하여 16종류의 시료 이형유를 만든 후 polyether sulphone로 피복한 철판에 케익을 구워 이탈율의 정도 그리고 이형유 제조 직후와 구운후의 이형유 시료들의 산가와 과산화물과 변화를 조사한 결과를 요약하면 다음과 같다. 1. 이탈에 가장 큰 영향을 주는 것은 첨가물보다 기본유 자체의 성질에 있는 것으로 나타났다. 요오드가가 낮을수록 즉 포화 지방산이 많을수록 이탈률이 좋았다. 가장 좋은 이탈률을 보인 것은 coconut oil에 wax 2%와 Lecithin 2%를 첨가하여 제조한 것으로 도포량에 관계없이 좋은 이탈률을 보였다. 2. 산가는 이형유 조제 직후에나 구운 후에도 큰 변화가 없었다. Soybean oil, palmolein, corn oil, coconut oil은 각각 구운 후의 산가가 0.045, 0.048, 0.085, 0.044를 나타냈다. 3. 철판유 제조 직후 과산화물가는 soybean oil, palmolein, corn oil, coconut oil이 각각 1.19, 0.81, 1.00 그리고 1.10이었으나 구운 후에는 7.9, 7.0, 10.9, 9.9로 고온에서 과산화물가가 급격하게 상승하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권2호
• /
• pp.47-54
• /
• 2015

The objective of this study was to optimize the experimental conditions for bioleaching of arsenic (As) using Herbaspirillum sp. GW103 and to understand the interaction between bacteria and As during bioleaching. Five variables, temperature, time, CaCO₃, coconut oil cake, and shaking rate, were optimized using response surface methodology (RSM) based Box-Behnken design (BBD). Maximum (73.2%) bioleaching of As was observed at 30℃, 60 h incubation, 1.75% CaCO₃, 3% coconut oil cake, and 140 rpm. Sequential extraction of bioleached soil revealed that the isolate Herbaspirillum sp. GW103 significantly reduced 28.6% of water soluble fraction and increased 38.8% of the carbonate fraction. The results of the study indicate that the diazotrophic bacteria Herbaspirillum sp. could be used for bioleaching As from mine soil.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권6호
• /
• pp.637-642
• /
• 1996

This experiment was conducted to determine RDP values of locally available feedstuffs that are commonly used in ruminant rations in Bangladesh. Four cattle were fistulated in the rumen for the in situ nylon bag studies. Seventeen different feedstuff sample (9 roughages and 8 concentrates) were evaluated in $4{\times}14cm$ nylon bags and incubated in the rumen for different periods of time (2, 6, 12, 24, 48 and 72 h). The variation in crude protein (CP) contents reflected on the average CP disappearance value throughout the rumen incubation. Soluble fraction (a), insoluble but degradable fraction (b) along with the rate of degradation also varied widely among the various feedstuffs. Under 2% of rumen outflow rate, the percentages of the calculated protein degradabilities of roughages were rice straw, 16.7; maize grass, 70.6; oat grass, 70.8; dhal grass, 71.1; sunhemp, 78.4; napier grass, 62.4; matikalai grass, 72.1; khesarikalai grass, 76.9 and daincha browse, 78.4, respectively. The results in the protein degradabilities (%) in 8% ruminal outflow rate of concentrates were wheat bran, 61.6; rice polish (red), 61.3; rice polish (auto), 30.9; mustard oil cake, 71.8; sesame oil cake, 74.2; coconut oil cake, 57.9; soybean meal, 49.2 and fish meal, 37.9, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제25권4호
• /
• pp.459-463
• /
• 2015

This study evaluated the microbial conversion of coconut oil waste, a major agro-residue in tropical countries, into single cell oil (SCO) feedstock for biodiesel production. Copra cake was used as a low-cost renewable substrate without any prior chemical or enzymatic pretreatment for submerged growth of an oleaginous tropical mangrove fungus, Aspergillus terreus IBB M1. The SCO extracted from fermented biomass was converted into fatty acid methyl esters (FAMEs) by transesterification and evaluated on the basis of fatty acid profiles and key fuel properties for biodiesel. The fungus produced a biomass (8.2 g/l) yielding 257 mg/g copra cake SCO with ~98% FAMEs. The FAMEs were mainly composed of saturated methyl esters (61.2%) of medium-chain fatty acids (C12-C18) with methyl oleate (C18:1; 16.57%) and methyl linoleate (C18:2; 19.97%) making up the unsaturated content. A higher content of both saturated FAMEs and methyl oleate along with the absence of polyunsaturated FAMEs with ≥4 double bonds is expected to impart good fuel quality. This was evident from the predicted and experimentally determined key fuel properties of FAMEs (density, kinematic viscosity, iodine value, acid number, cetane number), which were in accordance with the international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards, suggesting their suitability as a biodiesel fuel. The low cost, renewable nature, and easy availability of copra cake, its conversion into SCO without any thermochemical pretreatment, and pelleted fungal growth facilitating easier downstream processing by simple filtration make this process cost effective and environmentally favorable.

• Journal of Microbiology and Biotechnology
• /
• 제19권5호
• /
• pp.462-467
• /
• 2009

Cyclosporin A (CyA) produced by Tolypocladium inflatum is a promising drug owing to its immunosuppressive and antifungal activities. From an industrial point of view, the necessity to obtain a suitable and economic medium for higher production of CyA was the aim of this work. The present study evaluated the effect of different fermentation parameters in solid state fermentation, such as selection of solid substrate, hydrolysis of substrates, initial moisture content, supplementation of salts, additional carbon, and nitrogen sources, as well as the inoculum age and size, on production of CyA by Tolypocladium inflatum MTCC 557. The fermentation was carried out at $25{\pm}2^{\circ}C$ for 9 days. A combination of hydrolyzed wheat bran flour and coconut oil cake (1:1) at 70% initial moisture content supported a maximum production of $3,872{\pm}156\;mg$ CyA/kg substrate as compared with $792{\pm}33\;mg/kg$ substrate before optimization. Furthermore, supplementation of salts, glycerol (1% w/w), and ammonium sulfate (1% w/w) increased the production of CyA to $5,454{\pm}75\;mg/kg$ substrate. Inoculation of 5 g of solid substrate with 6 ml of 72-h-old seed culture resulted in a maximum production of $6,480{\pm}95\;mg$ CyA/kg substrate.

• Journal of Microbiology and Biotechnology
• /
• 제19권11호
• /
• pp.1385-1392
• /
• 2009

This work evaluates the effect of different amino acids on production of Cyclosporin (CyA) production in solid-state fermentation that was previously optimized for different fermentation parameters by one factor at-a-time for the maximum production of CyA by Tolypocladium inflatum MTCC557. Based on the Plackett-Burman design, glycerol, ammonium sulfate, $FeCl_3$, and inoculum size were selected for further optimization by response surface methodology (RSM). After identifying effective nutrients, RSM was used to develop mathematical model equations, study responses, and establish the optimum concentrations of the key nutrients for higher CyA production. It was observed that supplementation of medium containing (% w/w) glycerol, 1.53; ammonium sulfate, 0.95; $FeCl_3$, 0.18; and inoculum size 6.4 ml/5g yielded a maximum of 7,106 mg/kg as compared with 6,480 mg CyA/kg substrate using one factor at-a-time. In the second step, the effect of amino acids on the production of CyA was studied. Addition of $_L$-valine and $_L$-leucine in combination after 20 h of fermentation resulted in maximum production of 8,166 mg/kg.