• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.137-142
• /
• 1998

This study aims to examine appropriate kinds of pan oil to release a cake from the pan coated with polyether sulphone and to prove the change of acid value and peroxide value during the process of baking. The major factor effecting the rate of release of the cakes from the pan was properties of the oils rather than the additives. The releasing rate appeared higher as the iodine value was lower. The highest releasing rate was found in the sample, which was made of coconut oil plus 2% of wax, 2% of lecithin. The changes of acid value of the pan oil between the beginning and after baking was little different. In contrast, Peroxide value showed a great change after baking.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.2
• /
• pp.47-54
• /
• 2015

The objective of this study was to optimize the experimental conditions for bioleaching of arsenic (As) using Herbaspirillum sp. GW103 and to understand the interaction between bacteria and As during bioleaching. Five variables, temperature, time, CaCO₃, coconut oil cake, and shaking rate, were optimized using response surface methodology (RSM) based Box-Behnken design (BBD). Maximum (73.2%) bioleaching of As was observed at 30℃, 60 h incubation, 1.75% CaCO₃, 3% coconut oil cake, and 140 rpm. Sequential extraction of bioleached soil revealed that the isolate Herbaspirillum sp. GW103 significantly reduced 28.6% of water soluble fraction and increased 38.8% of the carbonate fraction. The results of the study indicate that the diazotrophic bacteria Herbaspirillum sp. could be used for bioleaching As from mine soil.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.6
• /
• pp.637-642
• /
• 1996

This experiment was conducted to determine RDP values of locally available feedstuffs that are commonly used in ruminant rations in Bangladesh. Four cattle were fistulated in the rumen for the in situ nylon bag studies. Seventeen different feedstuff sample (9 roughages and 8 concentrates) were evaluated in $4{\times}14cm$ nylon bags and incubated in the rumen for different periods of time (2, 6, 12, 24, 48 and 72 h). The variation in crude protein (CP) contents reflected on the average CP disappearance value throughout the rumen incubation. Soluble fraction (a), insoluble but degradable fraction (b) along with the rate of degradation also varied widely among the various feedstuffs. Under 2% of rumen outflow rate, the percentages of the calculated protein degradabilities of roughages were rice straw, 16.7; maize grass, 70.6; oat grass, 70.8; dhal grass, 71.1; sunhemp, 78.4; napier grass, 62.4; matikalai grass, 72.1; khesarikalai grass, 76.9 and daincha browse, 78.4, respectively. The results in the protein degradabilities (%) in 8% ruminal outflow rate of concentrates were wheat bran, 61.6; rice polish (red), 61.3; rice polish (auto), 30.9; mustard oil cake, 71.8; sesame oil cake, 74.2; coconut oil cake, 57.9; soybean meal, 49.2 and fish meal, 37.9, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.4
• /
• pp.459-463
• /
• 2015

This study evaluated the microbial conversion of coconut oil waste, a major agro-residue in tropical countries, into single cell oil (SCO) feedstock for biodiesel production. Copra cake was used as a low-cost renewable substrate without any prior chemical or enzymatic pretreatment for submerged growth of an oleaginous tropical mangrove fungus, Aspergillus terreus IBB M1. The SCO extracted from fermented biomass was converted into fatty acid methyl esters (FAMEs) by transesterification and evaluated on the basis of fatty acid profiles and key fuel properties for biodiesel. The fungus produced a biomass (8.2 g/l) yielding 257 mg/g copra cake SCO with ~98% FAMEs. The FAMEs were mainly composed of saturated methyl esters (61.2%) of medium-chain fatty acids (C12-C18) with methyl oleate (C18:1; 16.57%) and methyl linoleate (C18:2; 19.97%) making up the unsaturated content. A higher content of both saturated FAMEs and methyl oleate along with the absence of polyunsaturated FAMEs with ≥4 double bonds is expected to impart good fuel quality. This was evident from the predicted and experimentally determined key fuel properties of FAMEs (density, kinematic viscosity, iodine value, acid number, cetane number), which were in accordance with the international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards, suggesting their suitability as a biodiesel fuel. The low cost, renewable nature, and easy availability of copra cake, its conversion into SCO without any thermochemical pretreatment, and pelleted fungal growth facilitating easier downstream processing by simple filtration make this process cost effective and environmentally favorable.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.5
• /
• pp.462-467
• /
• 2009

Cyclosporin A (CyA) produced by Tolypocladium inflatum is a promising drug owing to its immunosuppressive and antifungal activities. From an industrial point of view, the necessity to obtain a suitable and economic medium for higher production of CyA was the aim of this work. The present study evaluated the effect of different fermentation parameters in solid state fermentation, such as selection of solid substrate, hydrolysis of substrates, initial moisture content, supplementation of salts, additional carbon, and nitrogen sources, as well as the inoculum age and size, on production of CyA by Tolypocladium inflatum MTCC 557. The fermentation was carried out at $25{\pm}2^{\circ}C$ for 9 days. A combination of hydrolyzed wheat bran flour and coconut oil cake (1:1) at 70% initial moisture content supported a maximum production of $3,872{\pm}156\;mg$ CyA/kg substrate as compared with $792{\pm}33\;mg/kg$ substrate before optimization. Furthermore, supplementation of salts, glycerol (1% w/w), and ammonium sulfate (1% w/w) increased the production of CyA to $5,454{\pm}75\;mg/kg$ substrate. Inoculation of 5 g of solid substrate with 6 ml of 72-h-old seed culture resulted in a maximum production of $6,480{\pm}95\;mg$ CyA/kg substrate.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.11
• /
• pp.1385-1392
• /
• 2009

This work evaluates the effect of different amino acids on production of Cyclosporin (CyA) production in solid-state fermentation that was previously optimized for different fermentation parameters by one factor at-a-time for the maximum production of CyA by Tolypocladium inflatum MTCC557. Based on the Plackett-Burman design, glycerol, ammonium sulfate, $FeCl_3$, and inoculum size were selected for further optimization by response surface methodology (RSM). After identifying effective nutrients, RSM was used to develop mathematical model equations, study responses, and establish the optimum concentrations of the key nutrients for higher CyA production. It was observed that supplementation of medium containing (% w/w) glycerol, 1.53; ammonium sulfate, 0.95; $FeCl_3$, 0.18; and inoculum size 6.4 ml/5g yielded a maximum of 7,106 mg/kg as compared with 6,480 mg CyA/kg substrate using one factor at-a-time. In the second step, the effect of amino acids on the production of CyA was studied. Addition of $_L$-valine and $_L$-leucine in combination after 20 h of fermentation resulted in maximum production of 8,166 mg/kg.