• 한국해양공학회지
• /
• 제27권3호
• /
• pp.8-14
• /
• 2013

Although there are various factors that threaten the security of ships, one of the most harmful is corrosion. It is not easy to find corroding areas and the status of corrosion, even though corrosion causes serious problems such as submergence and marine pollution as a result of leaking oil and polluted water. To monitor the corrosion of ships, non-destructive inspection, weight loss coupons, electrical resistance, linear polarization resistance, zero resistance ammeter, and electrochemical impedance spectroscopy have been developed. However, these methods require much time to detect corrosion, and most are not appropriate for real time monitoring. Coating, sacrificial anode, and impressed current cathodic protection (ICCP) methods have been developed to control corrosion. The ICCP and sacrificial anode methods are the most popular ways to prevent ship corrosion. However, ICCP is only appropriate for the outside of a ship and cannot be used for complex structures such as ballast tanks because these are composed of many separate chambers. Sacrificial anodes have to be replaced periodically. This paper proposes an integrated corrosion monitoring and control system (ICMCS) that can detect corrosion in real time and is appropriate for complex structures such as ballast tanks. Because the system uses titanium for an anode, exhausted anodes do not need to be replaced.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.17-26
• /
• 2007

본 연구에서는 수증기댐처리 또는 횡단면 코팅처리 등이 오동나무 장고용 초갈이재의 송풍오븐건조 특성에 미치는 영향을 구명코저하였다. 건조개시 직후의 중량감소량은 무처리(C-NC treatment), 엔드코팅처리(C-CO treatment), 수증기댐처리(V-NC treatment), 수증기댐-엔드코팅처리(V-CO treatment)재의 순으로 크게 나타났다. V-CO처리재는 V-NC처리재와 비교하여 전(全)건조기간에 걸쳐 더 완만한 온도경사를 보였으며 내층과 외층간에 온도경사가 거의 존재하지 않았다. C-CO처리재의 경우 C-NC처리재와 비교하여 건조중기까지는 외층과 내층의 수증기압 모두가, 그리고 건조중기 이후에는 내층의 수증기압이 더 높게 나타났다. V-CO처리재의 경우 건조초기에는 V-NC처리재와 유사한 분포를 보였으나, 건조초기 이후 통공, 외층, 내층의 순으로 절대수증기압이 큰 분포를 보이면서 V-NC처리재와는 전혀 다른 분포모형이 관찰되었다. 재면할렬과 윤할은 모든 처리재에서 전혀 발생하지 않았으나 엔드코팅을 실시하지 않은 C-NC와 V-NC에서는 횡단면할렬이 심하게 발생하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.96-96
• /
• 2010

Monodispersed spherical silica-coated ceria nanoparticles were prepared through a sol-gel process using tetraethylorthosilicate (TEOS) and ceria fine particles. In this process, ceria fine particles were also prepared from cerium nitrate. The mean size of ceria particles was 300nm. Silica nanoparticles with narrow particle size distribution were prepared by controlled hydrolysis of TEOS solution. The silica sols were obtained by peptization, the process of redispersing a coagulated colloid, and were coated on ceria particles by the control of the weight ratio of silica/ceria and the pH of the mixture in aqueous solution. The morphologies of particles were characterized with scaning electron microscopy(SEM), transmission electron microscopy(TEM) and atomic force microscopy(AFM). The coating thickness of silica particles obtained by using this method was controlled in the range of 30 - 70nm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.5-53
• /
• 2001

In continuous galvanizing process at steel making plant, coating weight on the surface of strip that pass through air knife is controlled by the pressure at the chamber of air knife and the gap between the nozzle of air knife and strip. The pressure can be easily measured and controlled. But it is difficult to measure the distance between Air knife nozzle and strip, and also difficult to decide how much distance air knife move. Because, the gap between nozzle and strip varies with the height of air knife, intermesh of stabilizing roll and welding of strips that have different thickness. In this research, we developed a gap sensor that can measure the relative distance between Air knife nozzle and strip. And several tests are performed to find optimal condition for application at real plant. We performed test in which the possibility of the sensor to apply ...

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.883-888
• /
• 2012

The efficacy of cowdung, Bangladesh Institute of Nuclear Agriculture (BINA)-biofertilizer, and Bangladesh Agricultural University (BAU)-biofungicide, alone or in combination, was evaluated for controlling foot rot disease of lentil. The results exhibited that BINA-biofertilizer and BAU-biofungicide (peat soil-based Rhizobium leguminosarum and black gram bran-based Trichoderma harzianum) are compatible and have combined effects in controlling the pathogenic fungi Fusarium oxysporum and Sclerotium rolfsii, which cause the root rot of lentil. Cowdung mixing with soil (at 5 t/ha) during final land preparation and seed coating with BINA-biofertilizer and BAU-biofungicide (at 2.5% of seed weight) before sowing recorded 81.50% field emergence of lentil, which showed up to 19.85% higher field emergence over the control. Post-emergence deaths of plants due to foot rot disease were significantly reduced after combined seed treatment with BINA-biofertilizer and BAU-biofungicide. Among the treatments used, only BAU-biofungicide as the seed treating agent resulted in higher plant stand (84.82%). Use of BINA-biofertilizer and BAU-biofungicide as seed treating biocontrol agents and application of cowdung in the soil as an organic source of nutrient resulted in higher shoot and root lengths, and dry shoot and root weights of lentil. BINA-biofertilizer significantly increased the number of nodules per plant and nodules weight of lentil. Seeds treating with BAU-biofungicide and BINA-biofertilizer and soil amendment with cowdung increased the biomass production of lentil up to 75.56% over the control.

• 박물관보존과학
• /
• 제7권
• /
• pp.43-51
• /
• 2006

광주 신창동 저습지유적에서 다양한 목재유물과 더불어 목재표면에 옻칠이 된 칠기들이 다량으로 출토되었다. 칠기들은 목질부가 열화 되어 취약하며 칠층이 들떠있어 박락과 갈라짐의 발생우려가 높다. 따라서 진공 동결건조에 효과적인 PEG#4000 40%로 함침처리 하였고 동결건조의 종료온도를 0℃이하로 하였다. 동결건조 직후 목제와 칠기의 중량과 상대습도 60% 의 밀폐공간에서 방치 후 중량을 비교하였다. 그 결과 중량변화가 없었으므로 동결건조 중 종료 온도 조절로써 건조 후 목재함유수분조절과 대기 중 습도변화에 안정성을 확인하였다. 칠도막 분석결과 밑층에 흑색안료를 혼합하여 목재표면에 밑칠을 하고 칠층의 상부에 옻칠과 흑색안료를 혼합하여 3~4회 칠한 것과 검은 밑칠을 하지 않고 칠층에 옻칠과 흑색 안료를 혼합하여 3~4회 칠한 것으로 확인되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.437-441
• /
• 2016

Recently, the grain boundary diffusion process (GBDP), involving heavy rare-earth elements such as Dy and Tb, has been widely used to enhance the coercivity of Nd-Fe-B permanent magnets. For example, a Dy compound is coated onto the surface of Nd-Fe-B sintered magnets, and then the magnets are heat treated. Subsequently, Dy diffuses into the grain boundaries of Nd-Fe-B magnets, forming Dy-Fe-B or Nd-Dy-Fe-B. The dip-coating process is also used widely instead of the GBDP. However, it is quite hard to control the thickness uniformity using dip coating. In this study, first, a $DyF_3$ paste is fabricated using $DyF_3$ powder. Subsequently, the fabricated $DyF_3$ paste is homogeneously coated onto the surface of a Nd-Fe-B sintered magnet. The magnet is then subjected to GBDP to enhance its coercivity. The weight ratio of binder and $DyF_3$ powder is controlled, and we find that the coercivity enhances with decreasing binder content. In addition, the maximum coercivity is obtained with the paste containing 70 wt% of $DyF_3$ powder.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.385-391
• /
• 2019

In the present study, vanadium oxide($V_2O_5$) films for electrochromic(EC) application are fabricated using sol-gel spin coating method. In order to optimize the EC performance of the $V_2O_5$ films, we adjust the amounts of polyvinylpyrrolidone(PVP) added to the solution at 0, 5, 10, and 15 wt%. Due to the effect of added PVP on the $V_2O_5$ films, the obtained films show increases of film thickness and crystallinity. Compared to other samples, optimum weight percent(10 wt%) of PVP led to superior EC performance with transmittance modulation(45.43 %), responding speeds(6.0 s at colored state and 6.2 s at bleached state), and coloration efficiency($29.8cm^2/C$). This performance improvement can be mainly attributed to the enhanced electrical conductivity and electrochemical activity due to the increased crystallinity and thickness of the $V_2O_5$ films. Therefore, $V_2O_5$ films fabricated with optimized amount of PVP can be a promising EC material for high-performance EC devices.

• 한국작물학회지
• /
• 제65권1호
• /
• pp.30-39
• /
• 2020

벼 직파재배나 육묘에서 종자소독, 병충해방제, 시비 등에 요구되는 생산비절감기술로 개발된 기존 규산코팅볍씨(규산/Zeolite)의 단점 보완으로 신규 규산코팅기술이 개발되었다. 신규 규산코팅볍씨의 제조 및 이용특성과 육묘상자에서 건묘육성 및 벼 키다리병 경감효과를 명확하게 하기 위하여 벼 키다리병 이병성 감염종자를 소독 없이 마른 상태로 코팅한 볍씨와 중도저항성 소독된 보급종자를 마른 상태로 코팅한 볍씨를 토경조건과 수경조건에서 시험이 수행되었다. 1. 신규 규산코팅볍씨는 종자 100 g에 코팅 바인더 점액성 수용성규산 18 ml을 충분히 묻히고 거기에 Dolomite 80 g/철 5 g의 혼합분말을 고루 뿌려서 코팅되었다. 2. 신규 규산코팅볍씨의 특성은 종자무게의 1.84배이었고 중량, 코팅강도와 코팅색택 등이 기존 규산코팅볍씨보다 훨씬 개선되었다. 3. 신규 규산코팅볍씨의 묘는 무코팅볍씨에서 자란 묘의 연한 엽색과 늘어지는 초형에 비하여 짙은 엽색(SPAD치)으로 직립되었고 엽신의 규질화가 현저히 높았으며 묘소질(w/cm)은 유의하게 증가되었다. 특히 생육량과 엽색도는 토경조건에서 보다 영양이 결제된 수경조건에서 뚜렷하였다. 4. 47일간 육묘 중 벼 키다리병 발생은 파종 후 38일에 peak를 보였고 무코팅볍씨 발병률 54.2%에 비하여 신규 규산코팅에서는 68.8~70.7%의 방제가를 나타내었다. 이상을 종합하여 보면 벼농사에서 가장 많이 요구되는 규산질 비료를 Dolomite와 철분으로 종피에 코팅시켜서 만든 신규 규산코팅볍씨로 종자소독, 건묘육성 및 벼 키다리병 경감 효과 등은 친환경 저비용과 안전 쌀 생산에 크게 기여되리라 본다. 또한 장기 영양결제에도 육묘 중 뿌리 활력이나 엽의 노화 없이 정상생육이 지속되어 육묘시비량 절감 가능성도 보였고 금후 묘의 노화경감을 위한 최소 영양공급 연구가 요구되었다.