• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.158-163
• /
• 2018

Perilla (Perilla frutescens var.frutescens) is an annual plant of the Lamiaceae family, mainly grown for obtaining oil by press extraction after roasting the seeds. Oil yield is one of its important traits, but evaluating this yield is time-consuming, requires many seeds, and is hard to adjust to pedigrees in a breeding field. The objective of this study was to develop a method for selecting high-oil-yield lines in a breeding population without oil extraction. Twenty-three perilla cultivars were used for evaluating the oil yield and seed traits such as seed hardness, seed coat thickness, seed coat proportion and crude fat. After evaluation of the seed traits of 23 perilla cultivars, the ranges of oil yields, seed hardness, seed coat thickness, seed coat proportion, 100-seed weight, and crude fat were 24.68-38.75%, 157-1166 gf, $24-399{\mu}m$, 15.4-41.5%, 2.79-6.69 g, and 33.0-47.8%, respectively. In an analysis of correlation coefficients, the oil yield negatively correlated with seed length, seed width, the proportion of seed coat, seed hardness, and 1000-seed weight, but positively correlated with crude fat content. It was observed that as the seed coat proportion increased, the seed coat thickness, hardness, and 1000-seed weight also increased. Multiple linear regression (MLR) was employed to find major variables affecting the oil yield. Among the variables, traits crude fat content and seed coat proportion were assumed to be indirect parameters for estimating the potential oil yield, with respect to a significant positive correlation with the observed oil yield ($R^2=0.791$). Using these two parameters, an equation was derived to predict the oil yield. The results of this study show that various seed traits in 23 perilla cultivars positively or negatively correlated with the oil yield. In particular, crude fat and the seed coat proportion can be used for predicting the oil yield with the newly developed equation, and this approach will improve the efficiency of selecting prominent lines for the oil yield.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.938-943
• /
• 2017

Objective: Qingyu pig, a Chinese indigenous pig breed, exhibits two types of coat colour phenotypes, including pure black and white with black spotting respectively. Melanocortin receptor 1 (MC1R) and agouti signaling protein (ASIP) are two widely reported pivotal genes that significantly affect the regulation of coat colour. The objectives of this study were to investigate whether the polymorphisms of these two genes are associated with coat colour and analyze the molecular mechanism of the coat colour separation in Qingyu pig. Methods: We studied the phenotype segregation and used polymerase chain reaction amplification and Sanger sequencing to investigate the polymorphism of MC1R and ASIP in 121 Qingyu pigs, consisting of 115 black and 6 white with black spotted pigs. Results: Coat colour of Qingyu pig is associated with the polymorphisms of MC1R but not ASIP. We only found 2 haplotypes, $E^{QY}$ and $E^{qy}$, based on the 13 observed mutations from MC1R gene. Among which, $E^{qy}$ presented a recessive inheritance mode in black spotted Qingyu pigs. Further analysis revealed a g.462-463CC insertion that caused a frameshift mutation and a premature stop codon, thus changed the first transmembrane domain completely and lost the remaining six transmembrane domains. Altogether, our results strongly support that the variety of Qingyu pig's coat colour is related to MC1R. Conclusion: Our findings indicated that black coat colour in Qingyu pig was dominant to white with black spotted phenotype and MC1R gene polymorphism was associated with coat colour separation in Qingyu pig.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.15 no.2
• /
• pp.149-158
• /
• 2011

Objectives: The objective of this study is to compare the colour intensity of tongue body and that of tongue coat under the visible light and the ultraviolet light. Methods: We selected 7 subjects with completely or partially peeled tongue coat among the recruited 94 adults for the experiment. We took each tongue picture under the visible light and the ultraviolet light (315-400 nm) and then extracted sample images from the tongue body and tongue coat regions. Mean, median and mode of colour intensity from the sample images were calculated in 256 RGB system. Results: The green and the blue colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the visible light. In all channels, the red, green and blue, the colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the ultraviolet light. The colour differences between tongue coats and tongue bodies under the ultraviolet light were significantly higher than the colour differences under the visible light. Especially the colour difference under the ultraviolet light was highest in the green channel. Conclusions: We suggested that green colour image of the RGB system taken under the ultraviolet light could be used for more easy separating tongue coat region from tongue body.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.200-207
• /
• 2006

In addition to the basic properties of the base and top coating agents, corrosion resistance of non-chrome magni 565 coating and characteristics of coating film when coated to steel substrate were studied. The system had a good wettability at room temperature. Moreover, both the contact angle and surface tension were affected little by the viscosity of coating agent and surface roughness of the steel substrate. And the samples coated with optimal conditions showed a great corrosion resistance in salt spray test with 1500 hours or longer of initial appearance time of rust. The coating film was composed of overlapping layer of zinc and aluminium flakes, and the thickness of base coat increased with an increase of base coat viscosity. Based on the C-F peaks of 1,1-Difluoroethaen homo-polymer, it was thought that the base coat was an inorganic polymer bond layer. Meanwhile, the top coat showed C-F peaks of polytetrafluoroethylene with C-H peaks of phenol in FT-IR analysis. From the lower weight loss of base coat in TG analysis, it was thought that cross linking density of base coat was larger than that of top coat. It was thought that the small exothermic reactions observed in DSC curves were due to the thermosetting resins contained in the coating agents. Compared to the non-coated specimen, the coated sample showed more higher polarization resistance and corrosion potential with lower corrosion current density.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.35-47
• /
• 2015

PURPOSES : A tack coat has been utilized to increase the bond performance between the surface layer and base course (intermediate course) at various road pavement sites. This is similarly true in other nations. Based on this connection, the objective of the present study is to evaluate the properties of hot mix asphalt (HMA) mixtures with an RSC-4 or BD-Coat and determine the application rate of the tack coat. METHODS : The HMA specimens were manufactured using superpave gyratory compaction. The HMA mixtures were composed of a 5-cm thick surface layer and a 10-cm thick base course. An impact hammer resonance test (IHRT) and a static load shear test were conducted to evaluate the performance of the HMA mixtures with a tack coat. From these tests, the dynamic moduli related to the high-frequency resistance and interlayer shear strength (ISS) of HMA could be obtained. RESULTS : The results of the dynamic moduli of HMA are discussed based on the resonance frequency (RF). To check the accuracy of the IHRT, we conducted a coherence analysis. A direct shear test using the application of a static load test was carried out to evaluate the interlayer shear strength (ISS) of HMA. CONCLUSIONS : The maximum ISS was demonstrated at an RSC-4 application rate of 462 gsm, and the maximum dynamic modulus was demonstrated at an RSC-4 application rate of 306 gsm. By averaging the results of the ISS, the maximum ISS values were obtained when a BD-Coat application rate of 602 gsm was applied.

• Plant Biotechnology Reports
• /
• v.2 no.1
• /
• pp.75-85
• /
• 2008

Prune dwarf virus (PDV) is an Ilarvirus systemically infecting almond trees and other Prunus species and spreading through pollen, among other means. We have studied strategies based on coat protein (cp) gene to block PDV replication in host plant cells. A Portuguese isolate of PDV was obtained from infected almond leaves and used to produce the cDNA of the cp gene. Various constructs were prepared based on this sequence, aiming for the transgenic expression of the original or modified PDV coat protein (cpPDVSense and cpPDVMutated) or for the expression of cpPDV RNA (cpPDVAntisense and cpPDVwithout start codon). All constructs were tested in a PDV host model, Nicotiana benthamiana, and extensive molecular characterization and controlled infections were performed on transformants and their progenies. Transgenic plants expressing the coat protein RNA were able to block the proliferation of a PDV isolate sharing only 91% homology with the isolate used for cpPDV cloning, as evaluated by DAS-ELISA on newly developed leaves. With cp expression, the blockage of PDV proliferation in newly developed leaves was only achieved with the construct cpPDV Mutated, where the coat protein has a substitution in the 14th aa residue, with arginine replaced by alanine. This result points to a possible role of the mutated amino acid in the virus ability to replicate and proliferate. This work reveals the possibility of achieving protection against PDV through either coat protein RNA or mutated cp sequence.

• The Korea Journal of Herbology
• /
• v.32 no.6
• /
• pp.17-22
• /
• 2017

Objectives : Daily Dose of Apricot Kernel in Treatise on Cold Damage Diseases is usually written in the number, sometimes in the volume. The seed coat and acute end of Apricot Kernel must be removed, so author want to know its daily dose and proportion of seed coat and acute end. Methods : Assuming dosage by editions of Treatise on Cold Damage Diseases. And comparing it with measured weight of Apricot Kernel distributed in market. Results : The number of prescriptions including Apricot Kernel is ten, and eight of that are made to decoction, two of that are made to pill prescription. And two of decoction are made by reducing and uniting prescriptions. The daily dose of six decoction are 70, 47 or 35 in numbers. The 70 Apricot Kernel except seed coat and acute end are 1/2 Sheong ($33m{\ell}$) in volume, 3 Ryang (19.5 g) in weight. Weight of Apricot Kernel the most common in market is 0.28 ~ 0.38 g. 70 Apricot Kernel are 23.10 g, seed coats of that are 1.15 g, acute ends of that are 2.43 g, 70 Apricot Kernel except seed coat and acute end is 19.5 g. So, seed coat is 5%, acute end is 10% by proportion, which is the same with it assumed based on writings. Conclusions : 70 Apricot Kernel except seed coat and acute end are 1/2 Sheong, 3 Ryang, and it is 33 mL and 19.5 g respectively. It also correspond with current market goods.

• The monthly packaging world
• /
• s.337
• /
• pp.78-83
• /
• 2021

• Journal of Preventive Medicine and Public Health
• /
• v.36 no.4
• /
• pp.373-376
• /
• 2003

Objectives : Peripheral blood-buffy coat fractions (N=14,956) have been stored at $-70^{\circ}C$ in the headquarter of the Korean Multicenter Cancer Cohort (KMCC), since 1993. To study the future molecular etiology of cancers using specimens of the cohort, properly stored specimens are necessary, Therefore, the DNA-viability of the bully coat samples was investigated. Methods : Buffy coat fraction samples were randomly selected from various collection areas and years (N=100). The DNA viability was evaluate from the UV-absorbent ratios at 260/280nm and the PCH for $\beta$-globin was performed with genomic DNA isolated from the buffy coat. Results : PCR products were obtained from 85 and 98% of the C and H area-samples, respectively, using 50 or $100{\mu}l$ of the buffy coat. There were significant differences in the yields of the PCR-amplifications from the C and H areas (p<0.05), which was due to differences in the homogenization of the buffy coat fractions available as aliquots. The PCR-products were obtained from all of the samples (N=7) stored at the C area-local confer, but the other aliquots stored at the headquarter were not PCR-amplified, Therefore, the PCR products in almost all the samples, even including the DNA-degraded samples, were obtained. In addition, an improvement in the DNA isolation, i,e. approx. 1.6 fold, was found after using extra RBC lysis buffer. Conclusions : PCR products for $\beta$-globin were obtained from nearly all of the samples. The regional differences in the PCR amplifications were thought to have originated from the different sample-preparation and homogenization performance. Therefore, the long term-stored buffy coat species at the KMCC can be used for future molecular studies.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.453-458
• /
• 2011

The MC1R (Melanocortin 1 receptor) gene has been known as a causative gene of the coat colors in mammals and responsible for the E (Extension) locus which has three alleles ($E^D$, $E^+$, e) that determines coat colors. The dominant allele $E^D$ produces black or brown colors due to the missense mutation and the recessive e allele has frameshift mutation which shows red or yellow coat colors. Whereas the wild type $E^+$ produces variety of colors due to the interaction with A (Agouti) locus. In this study, PCR-RFLP was performed using two restriction enzymes (BsrF I and MspA1 I) in order to obtain MC1R genotypes in Korean brindle cattle and black cattle. The results showed that all of the animals have the $E^+$ alleles, indicating the $E^+$ allele might related with black coat colors. Later on, the experiments expanded to the 260 Korean candidate bulls whether these animals have the same $E^+$ allele. Among 260 samples investigated, 5% (13/260) of the animals had $E^+$e genotypes, indicating the $E^+$ allele is also present in the candidate bulls in a low frequency. Even though we expected that A locus also affect the black coat color in cattle, all the black coat color animals (brindle and black) have $E^+$ alleles in this study. Therefore, the genotyping of the MC1R gene in candidate bulls will recommended be applied for eliminating of black coat colors in Hanwoo population, if the farmers need to have the brown coat colors only.