• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.284-287
• /
• 2011

본 연구에서는 합리적인 잔교용 설계기준을 마련하기 위한 기초적인 연구로써 지반조건을 고려한 잔교의 거동특성을 분석하고자 하였다. 본 연구에서 고려한 잔교는 구조적인 합리성과 시공성(조립시공)이 우수한 조립식 잔교를 대상으로 하였다.(강효기 외, 2010) 서해안의 연약지반을 고려하기 위해 지반스프링을 이용한 해석모델을 개발하고, 다양한 해석조건에 대한 해석을 수행하여 그 특성을 파악하고자 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.3
• /
• pp.183-191
• /
• 2002

In general, the salient features of the floating breakwater have excellent regulation of sea-water keeping the marine always clean, up and down free movement with the incoming and outgoing tides, capable of being installed without considering the geological condition of sea-bed at any water depth. This study discusses the three dimensional wave transformation of the floating breakwater moored by piers, and its dynamic response numerically. Numerical method is based on the boundary integral method and eigenfunction expansion method. It is known that pier mooring system has higher absorption of wave energy than the chain mooring system. Pier mooring system permit only vertical motion (heaving motion) of floating breakwater, other motions restricted. It is assumed in the present study that a resistant force as friction between piers and floating pontoon is not applied far the vertical motion of the floating breakwater. According to the numerical results, draft and width of the floating breakwater affect on the wave transformations greatly, and incident wave of long period is well transmitted to the rear of the floating breakwater, And the vertical motion come to be large for the short wave period.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.97-104
• /
• 1997

A hyperbolic numerical model with multi-directional waves has been used to investigate harbor tranquility in Pohang New Harbor. Comparing numerical results with field data measured at two stations in the harbor, it was found that use of input condition of multi-directional waves is superior to the use of uni-directional waves. Calculations with unidirectional wave input give errors of about 12% at St. P2 and 26% at St. P3, while calculations with multi-directional wave input give errors of 4 % at St. P2 and. 14% at St. P3. Using the input condition of multi-directional waves, we investigate the tranquility of Pohang New Harbor with two layouts : the condition in 1994 when the downtime at the 7th pier was often reported and the condition in 1996 when the 4th disposal site was constructed. The numerical results show that the problem of downtime at the 7th pier cannot be solved by the construction of the 4th disposal site.

• The Journal of Fisheries Business Administration
• /
• v.24 no.2
• /
• pp.17-53
• /
• 1993

Pusan is the largest fishing port in Korea, and deals with more than I million ton of fish catches annually, including catches of coastal and off-shore fisheries as well as those of deep-sea fishery. However, it hen had no fishing port facilities specialized fer deep-sea fishery since it started 30 years ago. Economic and physical losses resulting from this have teen enormous. Although fishing port facilities are a part of infra-structures built by Governments, the construction of them has been delayed due to financial difficulties of Central or local governments. To overcome this harsh situation to which deep-sea fishery cooperations faced, some cooperations have decided to construct fishing port facilities including fish-pier specialized for deep-sea fishery in Gamcheon port. The construction expenses of these facilities were financed by private funds to which they themselves jointly contributed. As a result, a fish-[pier, which has the capacity of serving one fishing vessel of 10, 000 ton or four of 5, 000 ton or four of 1, 000 ton at the same time, will be opened in here by 1994. The paper examines the master plan to revitalize the deep-sea fisheries industry in a deep depression with the opening of these physical facilities. The framwork of the plan is pursued in two different aspects, which are both hardware and software. In a hardware aspect, the plan in to develop Pusan into a city which is suitable for one of the best fishing ports in the world. That is, it is to develop the city into a place famous for sightseeing as well as the distribution and processing of fish-products centering around fish-piers. On the other hand, in a software aspet, it is regarding improvement of the distribution system of fish-products. One way to do that is to make up some deficiencies of the current system of a producers' joint sale. And the other is to establish an exchange of fish-products futures. Through these institutions, we could abrsorb speculative funds, which would otherwise be invested in speculation on fish-products, into productive investment opportunities, We believe that if the plan is realized, the deep-sea fishery in Korea will revive from a long-tasted depression and make progress to become one of the mai industries of Korea.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.377-381
• /
• 2006

Recently, as economy grow and population increase we need to develop our coastal area and make good use of it for various purposes. That's why large structures are being installed on the sea. Some samples are petroleum storage tanks, pier of sea bridges. These are large structures which have been installed at coastal area. When we design such vertical cylinder, we should avoid too much construction expense caused by excessive designing or by lack of sufficient design. In order to prevent excessive expenditure, it is important to correctly calculate the force of waves acting on structures and predict the wave transformation. In this study, apply to VOF method based on Navier-Stokes equation and then discussed that nonlinear wave force and wave transformation. A comparison between the numerical model and existing experimental results showed nice agreement among them.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.1
• /
• pp.1-11
• /
• 2017

Seismic risk analysis was performed based on the total stress and effective stress of caisson type quay wall and pier type quay wall. In order to consider the effective stress effect, the pore pressure of the ground was distributed, using Byrne(1991) simple formula to estimate parameter and applied to the finn model. Through the results of seismic risk analysis according to the total stress and effective stress analysis method, the necessity of effective stress analysis in the seismic design of the quay wall installed on the soft ground was confirmed.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.215-228
• /
• 2000

This paper presents a novel method to predict a flushing rate in an embayment system, which can be utilized to assess an environmental impact caused by harbor construction. The method was successfully applied to the Ulsan-Onsan coastal area. The flushing rate was computed on the basis of water quality changes predicted by US Army Corps of Engineers' RMA-2/RMA-4 models. After calibration and verification to the measured tidal elevation and current velocity, the model was used to estimate the flushing rate in the proposed harbor. The water quality was simulated for 96 hours and the flushing rate was computed. The results indicated that the proposed harbor would significantly reduce the flushing rate in the Onsan harbor, especially at the small embayment area near the south breakwater. The flushing rate was evaluated for several alternatives, of which the tidal flow channel of 1,000 $m^2$ in the south pier appeared to be the best mitigation measure. This study proposes that the prediction of flushing rate would be a novel method to assess a water quality impact caused by harbor construction.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.848-851
• /
• 2012

본 연구에서는 서해안의 지역적 특성을 고려한 말뚝지지형 조립식 잔교의 상부구조를 구성하는 요소 부재인 주거더 ㄷ형강과 가로보 및 가로거더 H형강에 대해 횡-비틀림 좌굴(Lateral-Torsional Buckling) 여부와 부재별 좌굴강도 값을 유한요소해석을 통해 산정하였으며, 산정한 좌굴강도 값과 부재에 작용하는 설계하중에 대한 안전성 검토를 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.14-24
• /
• 2015

This study proposed an estimation method of allowable wave height for loading and unloading of the ship and evaluation of effective working days considering moored ship motion that is affected by sip sizes, mooring conditions, wave periods and directions. The method was examined validity by comparison with wave field data at pier $8^{th}$ in Pohang New Harbor. The wave field data obtained with wave height of 0.10~0.75 m and wave period of 7~13 s in ship sizes of 800~35,000 ton when a downtimes have occurred. On the other hand, the results of allowable wave height for loading and unloading of the ship in this method have obtained with wave heights of 0.19~0.50 m and wave periods of 8~12 s for ship sizes of 5,000, 10,000 and 30,000 ton. Thus this method well reproduced the field data respond to various a ship sizes and wave periods. And the results of this in Korea are didn't respond to various the ship sizes and wave periods, and we h method tended to decrease in 16~62 percent when have considered long wave, and it is decreased in 0~46 percent when didn't consider long wave than design standards in case of the ship sizes of 5,000~30,000 ton, wave period of 12 s and wave angle of $75^{\circ}$. The allowable wave heights for loading and unloading of the ship proposed by design standards in Korea have found that overestimated on smaller than 10,000 ton. On the other hand, the rate of effective working days considering ship motion at pier $8^{th}$ in Pohang New Harbor reduced in 6.5 percent when compare with the results without considering ship motion.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.133-146
• /
• 1999

Mokpo coastal area is connected to the adjacent a long river and two large basins. It is essential for port planning coastal zone management and environmental impact study to analyze the data related to the ship operation and variation of current and water quality due to the development of water area including dredging reclamation and estuary barrage. The Yongsan river estuary weir and Yongam-Kumho basins discharge much of water through water gates for the purpose of flood control and prohibit salt intrusion at the inland fresh water area. To meet this purpose discharge through the gates have been done at the period of maximum water level difference between inner river and sea level. This discharged water may cause the changes of current pattern and other environmental influences in the vicinity and inner area of semi-closed Mokpo harbor. In this study ADI method is applied to the governing equation for the analysis of the changes on current pattern due to discharged water. As the results of this study it is known that the discharging operation causes many changes including the increase of current velocity at the front water area at piers approaching passage and anchorages. Discussion made on the point of problems such as restricted maneuverability and the safety of morred vessels at pier and anchorage. To minimize this influence the linked gate operation discharging warning system and laternative mooring system are recommended.