• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.193-201
• /
• 2014

This paper presents the development of simulation system on EPB shield TBM Hood operation. In recent, EPB shield TBM is widely used in the tunnel construction. Since the hood system of the EPB shield TBM is most important to excavate the tunnel, it is necessary to perform the simulation of hood system to investigate the design and operation parameters prior to tunnel construction. In order to carry out this study, the scaled simulation system was designed and developed. The model tests were performed to verify the developed system. During the simulation, the earth pressures developed in the chamber during tunnelling were measured to evaluate the operation technique. The test results obtained by the developed simulation system show clearly the similar behaviour of TBM hood compared with the field data. It was also found that the ground loss during tunnelling is dependent on the change of earth pressure in chamber. Therefore, the simulation system developed in this study will be very useful to evaluate the operation technique of the TBM hood prior to tunnel construction. In addition, this system will be applied in a various condition of ground to get the operating information.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.1
• /
• pp.27-34
• /
• 2014

demand for a low-cost treatment technology is high because the sewage sludge has an 80% or higher water content and a high energy consumption cost. This study apply the thermal hydrolysis reaction that consumes a small amount of energy for sludge treatment. The purpose of this study is to quantify the viscosity of sewage sludge according to reaction temperature. we measured continuously the torque of dewatered sludge by the reaction temperature. As the reaction temperature increased, the dewatered sludge is thermal hydrolysis under a high temperature and pressure. Therefore, the bond water in the sludge cells comes out as free water, which changes the dewatered sludge from a solid phase to slurry of a liquid phase. The results of the viscosity measurements according to the reaction temperature showed that the viscosity was very high at $270,180kg/m{\cdot}sec$ at a temperature of 293K, but rapidly decreased with increases in the reaction temperature to $12kg/m{\cdot}sec$ at a temperature of 400K and to $4kg/m{\cdot}sec$ at a temperature of 460K or higher, similar to the changes in the viscosity of water. And we was obtained the viscosity function of boundary condition for the optimal design of thermal hydrolysis reactor by numerical modeling based on the this results.

• Journal of Distribution Science
• /
• v.12 no.11
• /
• pp.101-111
• /
• 2014

Purpose - This study aims to verify the construct of the service quality suitable to the characteristics of the business center, to develop the scale that can measure the service quality objectively, compare the diverse business centers in Korea, and present desirable methods of business center management and operation. Research design, data, and methodology - In the first stage, literature research and focus group interviews with current users and actual business experts of business centers were conducted. In addition, 69 early stage scale items were derived. In the second stage, a Delphi survey was conducted on the experts of business and academic circles. The measurement items in the early stage were supplemented and revised. The content validity rate (CVR) of 69 measures was computed and then the experts' opinions were used. As a result, the business center service quality scale, made up of 9 organizing factors and 36 measurement items, was constructed. In the third stage, a survey was conducted on the occupants who were currently using the business center. It was to confirm if the developed business center service quality scale could be actually utilized. The data of 435 samples collected were used. To refine the scale items, the exploratory factor analysis (EFA) was conducted repeatedly. Results - The business center service quality scale, made up of 8 factors and 33 items, was developed again. The 8 factors are reliability, speed, kindness, specialty, responsibility, appearance, convenience, and public interest. The reliability coefficient (Cronbach's Alpha) of each factor is greater than .7. Thus, it was confirmed that there was reliability in the measurement items. Further, the model suitability was verified using the confirmatory factor analysis (CFA), and the convergent validity and the discriminant validity were verified. This proved the construct validity. Through this process, the Korea Business Center Service Quality Scale was developed. Based on factor analysis, the developed business center service quality (BCSQ) scale consists of 4 aspects, 8 factors, and 33 items, comprising the "process quality" aspect: reliability (3 items), speediness (4 items), kindness (3 items) factors, the outcome quality aspect: expertise (3 items), responsibility (5 items) factors, the environment quality aspect: appearance (5 items), convenience (3 items) factors, and the public interest aspect: public interest (7 items) factor. However, according to CFA, the BCSQ scale consists of a total of 4 aspects, 8 factors, and 33 items, comprising the "process quality" aspect: reliability (3 items), speediness (3 items), kindness (3 items) factors, the outcome quality aspect: expertise (2 items), responsibility (4 items) factors, the environment quality aspect: appearance (3 items), convenience (2 items) factors, and the public interest aspect: public interest (3 items) factor. Conclusions - The BCSQ scale could serve as a diagnostic tool that will allow business center managers to determine service areas that are weak and in need of attention, and to improve the service quality of the business center.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.27-37
• /
• 2014

Purpose - As economic activities between different countries have rapidly spread in a world of free trade, it is inevitable that a large volume of cargo will be carried between countries. It is natural, then, that CO2 emissions and other environmental pollutions have followed, which exposes people and society to serious environmental problems and social costs, and so on. Therefore, the need to understand logistics is not only a matter of transportation but also an environmentally oriented matter. The purpose of this study is to look at some lessons and implications from the European case in terms of green logistics matters. Research design, data, and methodology - In order to look into this matter, first, it has to be established that some cargo transport volumes using different transportation modes have clearly declined because of previous economic recessions. Some transport policies produced by the European Union (EU) are based in a long history of struggling to cope with transport matters in European countries. In its recent transport policies, the EU has provided greener transportation alternatives, realizing that pollution matters affect the European transport market. This study tries to determine what policies the EU has implemented to deal with green logistics matters. This study concentrates in particular on the Marco Polo program in the EU. Results - This study found that the EU seems to consider these kinds of matters, that is, transport and the environment in the context of green logistics. The EU launched some policy instruments to solve this matter relatively earlier than other countries and reviewed them as necessary. In order to make these policy tools work, the EU provided PACT for combined transport, and then the Marco Polo I and II European transport white paper packages. These European policies deal with green logistics matters in two ways. First, some restrictions have been imposed, especially taxation, and so on. Transport subsidies are also powerful means of handling green logistics matters in Europe. Along with these two means of dealing with transport and the environment, the EU eventually targeted integration of different transport modes. Instead of employing only a single transport instrument mode to deliver the cargo to be carried, such as trucking, rail, ocean-going carrier, flight, or inland waterway transport, the EU has proposed that combining transport modes is the best alternative for transport and the environment. That is, the EU is pursuing the adoption of multimodalism as an answer to the green logistics challenge as it provides a more cost efficient and more productive means of transport. Conclusions - In conclusion, multimodal transport should be considered when applying green logistics, as it can provide an alternative way to achieve transport and environmental solutions together at the present time. Two methods can be used to encourage multimodal transport: restrictions and subsidies. These are the lessons and implications from European green logistics policies.

• Journal of Distribution Science
• /
• v.10 no.12
• /
• pp.35-43
• /
• 2012

Purpose - This study analyzes the effects of types of leadership on the employees of Italian restaurants, its efficacy, and organizational citizenship behavior, utilizing a causal assessment model. In this study, independent variables such as the type of leadership perceived in the manager or chef by an Italian restaurant's employees, and its efficacy were parameters, and the organizational citizenship behavior and organizational effectiveness were the variables representing the results in the hypothesis. The study aimed to draw implications by verifying the leadership via efficacy and the impact on organizational citizenship behavior of Italian restaurants. Research design, data, methodology - For the purpose of this analysis, specific questionnaire items were configured according to the theory and efficacy of the study. From a questionnaire used in organizational citizenship behavior comprising 22 questions, six were modified to suit the research purpose of this study. The configured questionnaire comprised 5 parts and 40 items. A Likert (Likert) 5-point scale was utilized to measure responses to the questionnaire items from the employees of an Italian restaurant in Seoul who participated in the survey. For data collection, 400 questionnaires were distributed, and 344 collected. Factor analysis and reliability verification were conducted using SPSS18.0 and AMOS18.0. A covariance structure analysis was conducted to test the research hypotheses. Results - Based on the results of the analyses, the summary and suggested implications of the research are as follows: The covariance structure analysis used to analyze the kind of effect transformational and transactional leadership styles in Italian restaurant employees had on self-efficacy, group-efficacy, and organizational citizenship behavior, indicated that among the characteristics of transformational leadership (such as, idealized influence, inspirational motivation, individual consideration, and intellectual stimulation), idealized influence and individual consideration had a positive influence on self-efficacy. Idealized influence, individual consideration, conditional reward, and management by exception also positively influenced self-efficacy and altruistic and conscientious behavior (organizational citizenship behavior). Conclusions - Results suggest that with regard to self-efficacy and group efficacy, managers in different departments and chefs should provide team members with a vision for the future, increase their confidence in their abilities, and build their trust in the organization. By evaluating employee performance and experiences, management can demonstrate leadership and encourage organizational citizenship behavior through enjoyable, voluntary participation. Transformational and transactional leadership is effective in group processes that include social-exchange relationships, self-efficacy and group efficacy, and organizational citizenship behavior. However, as this research study utilizes only self-reported data, it has several limitations, such as a vulnerability of errors caused by the various experiment types. A significant limitation of this study is the lack of potential for the duplication of results. The covariance structure analysis, however, provides complementation to limit the impact of errors from self-reporting studies. A future study can extend this research by utilizing different data collection methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.334-341
• /
• 2016

In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2013

Purpose - The development and implementation of OSS (Open Source Software) led to a dramatic change in corporate IT infrastructure, from system server to smart phone, because the performance, reliability, and security functions of OSS are comparable to those of commercial software. Today, OSS has become an indispensable tool to cope with the competitive business environment and the constantly-evolving IT environment. However, the use of OSS is insufficient in small and medium-sized companies and software houses. This study examines the need for OSS Intermediaries in the Software Distribution Channel. It is expected that the role of the OSS Intermediary will be reduced with the improvement of the distribution process. The purpose of this research is to prove that OSS Intermediaries increase the efficiency of the software distribution market. Research design, Data, and Methodology - This study presents the analysis of data gathered online to determine the extent of the impact of the intermediaries on the OSS market. Data was collected using an online survey, conducted by building a personal search robot (web crawler). The survey period lasted 9 days during which a total of 233,021 data points were gathered from sourceforge.net and Apple's App store, the two most popular software intermediaries in the world. The data collected was analyzed using Google's Motion Chart. Results - The study found that, beginning 2006, the production of OSS in the Sourceforge.net increased rapidly across the board, but in the second half of 2009, it dropped sharply. There are many events that can explain this causality; however, we found an appropriate event to explain the effect. It was seen that during the same period of time, the monthly production of OSS in the App store was increasing quickly. The App store showed a contrasting trend to software production. Our follow-up analysis suggests that appropriate intermediaries like App store can enlarge the OSS market. The increase was caused by the appearance of B2C software intermediaries like App store. The results imply that OSS intermediaries can accelerate OSS software distribution, while development of a better online market is critical for corporate users. Conclusion - In this study, we analyzed 233,021 data points on the online software marketplace at Sourceforge.net. It indicates that OSS Intermediaries are needed in the software distribution market for its vitality. It is also critical that OSS intermediaries should satisfy certain qualifications to play a key role as market makers. This study has several interesting implications. One implication of this research is that the OSS intermediary should make an effort to create a complementary relationship between OSS and Proprietary Software. The second implication is that the OSS intermediary must possess a business model that shares the benefits with all the participants (developer, intermediary, and users).The third implication is that the intermediary provides an OSS of high quality like proprietary software with a high level of complexity. Thus, it is worthwhile to examine this study, which proves that the open source software intermediaries are essential in the software distribution channel.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.35-44
• /
• 2013

Purpose - Until recently, studies on customer values for restaurants recognized two path structures; the SERVQUAL model, that is, service quality? perceived value? customer satisfaction? behavioral intention, and the customer value? customer satisfaction? behavioral intention path that categorizes customer values into functional value and hedonic value. This study, instead, classifies the consumption values of fast-food restaurants based on the consumption value system provided by Sheth, Newman and Gross (1991) and illustrates the new path structure, consumption value? customer satisfaction? behavioral intention, targeting college students for a generalization of the consumption value system of fast-food restaurants. Research design, data, and methodology - This study establishes five hypotheses based on the relationship between each type of consumption value (functional, emotional, social, and epistemic) and customer satisfaction, and the relationship between customer satisfaction and behavioral intention. For this analysis, data was collected by conducting a pre-test and administering a survey to 213 college students who are regular customers at fast-food restaurants in Seoul, Korea. The data collected was then analyzed using SPSS 15.0 and AMOS 6.0 statistical packages. Results - The study showed that: First, the consumption values of fast-food restaurants are classified into the following four categories: functional value, emotional value, social value, and epistemic value while consumption value can be applied to customer value of fast-food restaurants. Second, the functional and epistemic values had a positive impact on customer satisfaction. The resulting satisfaction is attributed to the intrinsic characteristics of fast-food restaurants like the consistent quality of food, reasonable prices, fast service, and unique or new experiences on every visit. On the other hand, emotional and social values did not affect customer satisfaction. The results on emotional value differed from the general studies on restaurants while the results obtained for social value were not consistent with the studies on high-end restaurants. Third, customer satisfaction had a positive impact on behavioral intention. The survey showed that college students reflected behavioral intention - repurchase intention and word-of-mouth - if they were satisfied with the food quality and employee services provided. Simultaneously, it was seen that the impact of functional value on customer satisfaction of fast food restaurant goers was more than that of epistemic value. Conclusions - The consumption values of fast-food restaurant users could be classified into four categories, functional, emotional, social and epistemic values, based on the consumption value system provided by Sheth, Newman and Gross (1991). It proved that the customer values of restaurant goers can be extended to the path structure of consumption value? customer satisfaction? behavioral intention to confirm its generalization. The study also showed that marketing managers need to focus more on the factors that influence functional value as the fast-food restaurant users consider timely services with the consistent quality of food at a reasonable price and at a convenient place more important than the new experiences or uniqueness.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.427-434
• /
• 2008

Processing of collagen from yellowfin tuna (Thunnus albacares) abdominal skins was optimized by response surface methodology and central composite design. The values of independent variables at optimal conditions were NaOH concentration: 0.5 N, NaOH treatment time: 36.2 hr, pepsin concentration: 1:4.9 ratio (0.245%, w/v), and digestion time: 48.1 hr, respectively. The collagen content estimated under optimal conditions was 33.1%, and the actual experimental collagen content was 32.3%. Physicochemical properties of collagen from yellowfin tuna abdominal skin were investigated by amino acids analysis, SDS-PAGE, FT-IR, viscosity and denaturation temperature. Amino acids content of the collagen was 21.0%. SDS-PAGE pattern of the collagen showed two different $\alpha$-chain (${\alpha}_1$- and ${\alpha}_2$- chain), $\beta$-component and $\gamma$-component. The spectrum of FT-IR of the collagen showed wavenumber at 3,434, 1,650, 1,542 and $1,235\;cm^{-1}$ representing the regions of amide A, I, II and III, respectively. Relative viscosity of the collagen decreased continuously on heating up to $32^{\circ}C$, and the rate of decrease was retarded in the temperature range of $35-50^{\circ}C$. Denaturation temperature (Td) of the collagen solution (0.06%, w/v) was $31^{\circ}C$ and was lower than calf skin collagen ($35^{\circ}C$).

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.1-8
• /
• 2020

The need for storage, management, and retrieval techniques for alternative data has emerged as technologies based on data generated from business activities conducted by enterprises have emerged as the key to business success in recent years. Existing big data platform systems must load a large amount of data generated in real time without delay to process unstructured data, which is an alternative data, and efficiently manage storage space by utilizing a deduplication system of different storages when redundant data occurs. In this paper, we propose a multi-layer distributed data deduplication process system using the similarity of the Cuckoo hashing filter technique considering the characteristics of big data. Similarity between virtual machines is applied as Cuckoo hash, individual storage nodes can improve performance with deduplication efficiency, and multi-layer Cuckoo filter is applied to reduce processing time. Experimental results show that the proposed method shortens the processing time by 8.9% and increases the deduplication rate by 10.3%.