• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.547-557
• /
• 2009

LIDAR (LIght Detection And Ranging) is an active remote sensing technology which provides 3D coordinates of the Earth's surface by performing range measurements from the sensor. Early small footprint LIDAR systems recorded multiple discrete returns from the back-scattered energy. Recent advances in LIDAR hardware now make it possible to record full digital waveforms of the returned energy. LIDAR waveform decomposition involves separating the return waveform into a mixture of components which are then used to characterize the original data. The most common statistical mixture model used for this process is the Gaussian mixture. Waveform decomposition plays an important role in LIDAR waveform processing, since the resulting components are expected to represent reflection surfaces within waveform footprints. Hence the decomposition results ultimately affect the interpretation of LIDAR waveform data. Computational requirements in the waveform decomposition process result from two factors; (1) estimation of the number of components in a mixture and the resulting parameter estimates, which are inter-related and cannot be solved separately, and (2) parameter optimization does not have a closed form solution, and thus needs to be solved iteratively. The current state-of-the-art airborne LIDAR system acquires more than 50,000 waveforms per second, so decomposing the enormous number of waveforms is challenging using traditional single processor architecture. To tackle this issue, four parallel LIDAR waveform decomposition algorithms with different work load balancing schemes - (1) no weighting, (2) a decomposition results-based linear weighting, (3) a decomposition results-based squared weighting, and (4) a decomposition time-based linear weighting - were developed and tested with varying number of processors (8-256). The results were compared in terms of efficiency. Overall, the decomposition time-based linear weighting work load balancing approach yielded the best performance among four approaches.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.554-561
• /
• 2017

Under the projected global warming, release of carbon as $CO_2$ through soil organic matter decomposition is expected to increase. Therefore, accurate measurement of $CO_2$ released from soil is crucial in understanding the soil carbon dynamics under increased temperature conditions. Sodium hydroxide (NaOH) traps are frequently used in laboratory soil incubation studies to measure soil respiration rate, but decreasing $CO_2$ gas solubility with increasing temperature may render the reliability of the method questionable. In this study, the influences of increasing temperature on the $CO_2$ capture capacity of NaOH traps were evaluated under $5{\sim}35^{\circ}C$ temperature range at $10^{\circ}C$ interval. Two closed-chamber experiments were performed where NaOH traps were used to capture $CO_2$ either released from acidified $Na_2CO_3$ solution or directly injected into the chamber. The sorption of ambient $CO_2$ within the incubators into NaOH traps was also measured. The amount $CO_2$ captured increased as temperature increased within 2 days of incubation, suggesting that increased diffusion rate of $CO_2$ at higher temperatures led to increases in $CO_2$ captured by the NaOH traps. However, after 2 days, over 95% of $CO_2$ emitted in the emission-absorption experiment was captured regardless of temperature, demonstrating high $CO_2$ absorption efficiency of the NaOH traps. Thus, we conclude that the influence of decreased $CO_2$ solubility by increased temperatures is negligible on the $CO_2$ capture capacity of NaOH traps, supporting that the use of NaOH traps in the study of temperature effect on soil respiration is a valid method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권5호
• /
• pp.365-372
• /
• 2021

Objectives: Mandibular fractures vary significantly with respect to epidemiological and demographic parameters among populations. To date, no study has evaluated these aspects of mandibular fractures in Nuh, Mewat, Haryana, India. To retrospectively analyze the incidence, age and sex distributions, etiology, anatomic distribution, occlusal status, treatment modality provided, and their correlation in patients who suffered isolated mandibular fractures. Materials and Methods: The records of maxillofacial injury patients who reported to the Department of Dentistry, SHKM Government Medical College from January 2013 to December 2019, were retrieved from our database, and necessary information was collected. The data collected were analyzed statistically using IBM SPSS ver. 21. Results: Totals of 146 patients and 211 fractures were analyzed. There were 127 males and 19 females with an age range of 3-70 years (mean age, 26 years). Road traffic accident (RTA) was the most common cause of fracture (64.4%), followed by fall (19.9%), assault (15.1%), and sports injury (0.7%). Of all patients, 42.5% had bilateral fractures, 31.5% had left side fracture, 21.2% had right side fracture, 3.4% sustained midline symphyseal fracture, and 1.4% had symphyseal fracture along one side of the mandible. Site distribution was as follows: parasymphysis (34.6%), angle (23.7%), condyle (20.4%), body (12.8%), symphysis (4.3%), ramus 2.4%, and dentoalveolar 1.9%. The most common facture combination was angle with parasymphysis (17.8%). Occlusion was disrupted in 69.2% patients. Closed reduction was the predominant treatment modality. Conclusion: The data obtained from retrospective analyses of maxillofacial trauma increase the understanding of variables and their outcomes among populations. The results of the present study are comparable to those of the literature in some aspects and different in others.

• 대한의사협회지
• /
• 제61권12호
• /
• pp.724-731
• /
• 2018

Our faces can express a remarkable range of subtle emotions and silent messages. Because the face is so essential for complex social interactions that are part of our everyday lives, aesthetic repair and restoration of function are an important tasks that we must not take lightly. Soft-tissue defects occur in trauma patients and require thorough evaluation, planning, and surgical treatment to achieve optimal functional and aesthetic outcomes, while minimizing the risk of complications. Recognizing the full nature of the injury and developing a logical treatment plan help determine whether there will be future aesthetic or functional deformities. Proper classification of the wound enables appropriate treatment, and helps predict the postoperative appearance and function. Comprehensive care of trauma patients requires a diverse breadth of skills, beginning with an initial evaluation, followed by resuscitation. Traditionally, facial defects have been managed with closure or grafting, and prosthetic obturators. Sometimes, however, large defects cannot be closed using simple methods. Such cases, which involve exposure of critical structures, bone, joint spaces, and neurovascular structures, requires more complex treatment. We reviewed and classified causes of significant trauma resulting in facial injuries that were reconstructed by microsurgical techniques without simple sutures or coverage with partial flaps. A local flap is a good choice for reconstruction, but large defects are hard to cover with a local flap alone. Early microsurgical reconstruction of a large facial defect is an excellent choice for aesthetic and functional outcomes.

• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.282-288
• /
• 2019

When liquefied natural gas (LNG) is vaporized to form natural gas for industrial and household consumption, a tremendous amount of cold energy is transferred from LNG to seawater as a part of the phase-change process. This heat exchange loop is not only a waste of cold energy, but causes thermal pollution to coastal fishery areas by dumping the cold energy into the sea. This project describes an innovative new design for reclaiming cold energy for use by cold storage warehouses (operating in the 35 to $62^{\circ}C$ range). Conventionally, warehouse cooling is done by mechanical refrigeration systems that consume large amounts of electricity for the maintenance of low temperatures. Here, a closed loop LNG heat exchange system was designed (by simulator) to replace mechanical or vapor-compression refrigeration systems. The software PRO II with PROVISION V9.4 was used to simulate LNG cold energy, gas re-liquefaction, and the vaporized process under various conditions. The effects on sensible and latent heats from changes to the array type of heat exchangers have been investigated, as well as an examination of the optimum.

• Molecules and Cells
• /
• 제42권1호
• /
• pp.45-55
• /
• 2019

The liver is involved in a wide range of activities in vertebrates and some other animals, including metabolism, protein synthesis, detoxification, and the immune system. Until now, various methods have been devised to study liver diseases; however, each method has its own limitations. In situ liver perfusion machinery, originally developed in rats, has been successfully adapted to mice, enabling the study of liver diseases. Here we describe the protocol, which is a simple but widely applicable method for investigating the liver diseases. The liver is perfused in situ by cannulation of the portal vein and suprahepatic inferior vena cava (IVC), with antegrade closed circuit circulation completed by clamping the infrahepatic IVC. In situ liver perfusion can be utilized to evaluate immune cell migration and function, hemodynamics and related cellular reactions in each type of hepatic cells, and the metabolism of toxic or other compounds by changing the composition of the circulating media. In situ liver perfusion method maintains liver function and cell viability for up to 2 h. This study also describes an optional protocol using density-gradient centrifugation for the separation of different types of hepatic cells, allowing the determination of changes in each cell type. In summary, this method of in situ liver perfusion will be useful for studying liver diseases as a complement to other established methods.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.319-332
• /
• 2021

The performance of gene expression programming (GEP) in predicting the compressive strength of bacteria-incorporated geopolymer concrete (GPC) was examined in this study. Ground-granulated blast-furnace slag (GGBS), new bacterial strains, fly ash (FA), silica fume (SF), metakaolin (MK), and manufactured sand were used as ingredients in the concrete mixture. For the geopolymer preparation, an 8 M sodium hydroxide (NaOH) solution was used, and the ambient curing temperature (28℃) was maintained for all mixtures. The ratio of sodium silicate (Na2SiO3) to NaOH was 2.33, and the ratio of alkaline liquid to binder was 0.35. Based on experimental data collected from the literature, an evolutionary-based algorithm (GEP) was proposed to develop new predictive models for estimating the compressive strength of GPC containing bacteria. Data were classified into training and testing sets to obtain a closed-form solution using GEP. Independent variables for the model were the constituent materials of GPC, such as FA, MK, SF, and Bacillus bacteria. A total of six GEP formulations were developed for predicting the compressive strength of bacteria-incorporated GPC obtained at 1, 3, 7, 28, 56, and 90 days of curing. 80% and 20% of the data were used for training and testing the models, respectively. R2 values in the range of 0.9747 and 0.9950 (including train and test dataset) were obtained for the concrete samples, which showed that GEP can be used to predict the compressive strength of GPC containing bacteria with minimal error. Moreover, the GEP models were in good agreement with the experimental datasets and were robust and reliable. The models developed could serve as a tool for concrete constructors using geopolymers within the framework of this research.

• 한국지열·수열에너지학회논문집
• /
• 제17권1호
• /
• pp.14-22
• /
• 2021

Drilling equipment is an essential part used in various fields such as construction, mining, etc., and it has drawn increasing attention in recent years. The drilling method is generally divided into three types. There are a top hammer method that strikes on the ground, a DTH (Down-The-Hole) method that directly strikes a bit in an underground area, and a rotary method that drills by using rotational force. Among them, the DTH method is most commonly used because it enables efficient drilling compared to other drilling methods. In the conventional DTH hammer, the valve between the piston and the bit is opened and closed using a face to face method. In order to improve the power of the DTH hammer, a DTH hammer with foot valve which is capable of instantaneous opening and closing is used in the drilling field. In this study, we designed a lab-scale DTH hammer with the foot valve, and manufactured an evaluation device for the experiment of the DTH hammer. In addition, we analyzed the performance of the DTH hammer adopted with foot valve according to the pressure range of 3-10 bar. As a result, the internal pressure distribution in the DTH hammer was experimentally analyzed, and then, the movement of the piston according to the pressure was predicted. We believe that this study provides the useful results to explain the performance characteristics of the DTH hammer with the foot valve.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.201-208
• /
• 2021

본 논문에서는 하부수평브레이싱 설치에 따른 무도상 철도판형교의 횡방향 및 비틀림거동에 관한 영향을 검토하였다. 우선 하부브레이싱의 부재 배치 형태가 다른 해석모델을 대상으로 하여 열차하중에 의한 횡방향변위를 비교 검토하여 가장 효율적인 하부 브레이싱의 배치에 대하여 검토하였다. 다음으로는 하부브레이싱을 설치한 2주형 철도판형교의 비틀림거동에 대해 검토를 수행하였다. 또한, FEM 해석결과로부터 구한 비틀림상수와 상부와 하부수평브레이싱을 등가두께로 치환하여 폐합단면으로 하는 철도판형교의 비틀림상수를 비교하였고, 교량의 지간길이와 하부브레이싱의 단면적의 영향을 검토하였다. 이와같은 해석결과를 기초로 본 연구에서는 횡좌굴모멘트와 비틀림상수비와의 관계곡선을 제시하였고 비틀림보강이 필요한 철도판형교의 범위를 제안하였다.

• 한국정보기술학회논문지
• /
• 제17권10호
• /
• pp.49-55
• /
• 2019

본 논문은 다중 사용자 다중 입력 단일 출력 (MISO) 간섭 채널에서 복수의 도청자가 존재하는 경우에, 보안 채널 수율을 향상시키기 위한 간단한 프리코딩 벡터 설계 기법을 제안한다. 제안하는 기법에서는 보안 채널 수율을 최적화하는 문제에 대해 다루었으며, 수학식으로 주어지는 분석해를 구하는 것을 목표로 하였다. 이를 위해서 신호대 누수 잡음비 (SLNR) 기반으로 프리코딩 벡터를 설계하는 방법을 제시한다. 구체적으로는, 도청자가 정보 신호를 전혀 검출할 수 없도록 도청 채널 수율을 완전히 제거하면서, 송신단-수신단 링크 간의 채널 수율을 최대화시키도록 프리코딩 벡터를 설계한다. 성능 검증을 위하여 모의실험을 수행하였으며, 송신 안테나 개수, 송신단-수신단 링크 개수, 도청자 수 간에 특별한 조건식을 만족하지 않는 환경에서는, 제안하는 기법이 모든 신호대 잡음비 범위에서 기존 기법보다 더 우수한 보안 채널 수율을 나타낸다는 것을 제시한다.