• 한국입자에어로졸학회지
• /
• 제17권2호
• /
• pp.29-36
• /
• 2021

In this study, the clean air delivery rate (CADR) of ceiling air circulator (CAA) was determined under indoor environmental simulation conditions. An air filter was used to provide air cleaning ability to the CAA. The CADR of filter adapted CAA was evaluated and compared with the value of commercial air purifier. The installation of mesh-shaped filter on the CAA showed particle reduction effect on the particles over 0.4 ㎛ in diameter, but the CADR was up to 0.25 m³/min. When the filter having 99.9% in collection efficiency was installed on the CAA, its CADR was 1.52 m³/min, while the CADR of commercial air purifier was 3.19 m³/min.

• 청정기술
• /
• 제7권4호
• /
• pp.291-297
• /
• 2001

본 연구는 중금속 추출 공정에 쓰이는 사차 암모늄 염인 Aliquat 336을 포함하는 콜로이드 액상 에이프런 (colloidal liquid aphrons, CLAs)을 지용성 계면활성제와 수용성 계면활성제를 사용하여 제조하였고 연속상에서 농축된 CLAs의 안정성을 표면으로 떠오르는 유기 용매의 양을 시간에 따라 측정하여 평가하였다. 다양한 조건에서 CLAs의 안정성을 비교하기 위해서 반감기가 도입되었다. 전해질의 첨가나 pH의 변화와 같은 연속상의 상태 변화는 CLAs의 파괴(break-up) 속도에 상당히 영향을 미치는데 이 파괴 속도가 급격히 변화하는 임계 응집 농도가 존재한다. pH의 변화에 따른 임계 응집 농도를 측정하였고 이온의 세기, 수용성 계면활성제 Sodium Dodecyl Sulfonate (SDBS)의 농도에 대한 CLAs의 안정성에 대한 영향을 고찰하였다.

• 한국식품위생안전성학회지
• /
• 제5권4호
• /
• pp.213-217
• /
• 1990

커피, 홍차, 녹차중의 카페인 함량을 간단하고 신속하게 정량하는 방법을 검토하였다. 역상계 액체크로마토그래피에 의한 카페인 정량은 메타놀-초산-물(20 : 1 : 79)을 이동상으로 하여 ${\mu}-Bondapak$ C18 컬럼하에서 이루어졌다. 카페인의 검출에는 UV검출기를 사용하여 280 mm에서 행하였다. Sep-Pak alumina A 카트리지를 이용한 간단한 전처리를 통해 효과적으로 카페인의 추출 및 clean-up를 행하였다. 카페인의 첨가 회수율은 95.2~101.3%이었고 분석의 재현성은 상대표준 편차로서 0.10~0.62%이었으며 검출한계는 $0.1;\mu\textrm{g}$/ml이었다.

• 분석과학
• /
• 제6권3호
• /
• pp.283-288
• /
• 1993

기체 크로마토그래피를 이용하여 과수 재배용 살균제인 nuarimol의 분석을 위한 최적 조건을 조사하고 사과 중에서의 잔류성을 규명하였다. 사과시료를 methanol로 추출, 여과한 후 4.00% NaCl과 dicholromethane액으로 분리농축하고, alumina 컬럼상에서 1-chlorobutane과 methanol 혼합액으로 정제하여 GLC/ECD로 분석하였다. 0.200와 1.00ppm 표준물 첨가 실험결과 평균 회수율이 79~95%였고, 사과 중 nuarimol의 잔류량은 수확 3일 전 8회 처리시 0.0830ppm이었다. 사과에 대한 안전 사용기간은 수확 7일전 6회 사용이 적당한 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.451-455
• /
• 2001

The epitaxial growth of Ge on the clean and surfactant(Sn) adsorbed surface of Ge(111) was studied by the intensity oscillation of a RHEED specular spot. In the case of epitaxial growth without the adsorbed surfactant, the RHEED intensity oscillation was stable and periodic up to 24ML at the substrate temperature of $200^{\circ}C$. Therefore the optimum temperature for the epitaxial growth of Ge on clean Ge(111) seems to be $200^{\circ}C$. However, in the case of epitaxial growth with the adsorbed surfactant, the irregular oscillations are observed in the early stage of the growth. The RHEED intensity oscillation was very stable and periodic up to 38ML, and the $d2{\times}2$ structure was not charged with continued adsorption of Ge at the substrate temperature of $200^{\circ}C$. These results may be explained by the fact that the diffusion length of Ge atoms is increased by decreasing the activation energy of the Ge surface diffusion, resulted by segregation of Sn toward the growing surface. From the desorption process, the desorption energy of Sn in Ge $\sqrt{5}{\times}\sqrt{5}$ structure is observed to be 3.28eV.

• 한국대기환경학회지
• /
• 제34권1호
• /
• pp.120-143
• /
• 2018

The analytical methods and their ambient levels of organic nitrogenous compounds such as nitrosamines, nitramines (nitroamines), imines, amides and nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) in the atmosphere are summarized and discussed. Sampling for the analysis of organic nitrogenous compounds was mostly conducted using high volume air sampler. The direct liquid extraction (DLE) using sonification and the pressurized liquid extraction (PLE) using the accelerated solvent extraction (ASE) have been frequently employed for the extraction of organic nitrogenous compounds in the atmospheric samples. After extraction, clean-up via filtration and the solid phase extraction (SPE) and concentrations using nitrogen and rotary evaporator have been generally conducted but in some studies the clean-up and concentration steps have been omitted to prevent the loss of analyte and improve the recovery rate of the analytical procedure. Instrumental analysis was mainly carried out using gas chromatography (GC) or the high performance liquid chromatography (HPLC) coupled with the single quadrupole mass spectrometer or tandem mass spectrometer in the electron ionization (EI), positive chemical ionization (PCI) and negative chemical ionization (NCI) mode and analysis sensitivity of nitrosamines and nitramines were higher in NCI mode. Desirable sampling and analysis methods for analyzing particulate organic nitrogenous compounds are suggested.

• Advances in materials Research
• /
• 제9권4호
• /
• pp.251-263
• /
• 2020

α-mangostin imprinted polymers have been synthesized by a non-covalent imprinting approach with α-mangostin as a template molecule. The α-mangostin molecularly imprinted polymers (MIPs) prepared by radical polymerization using methacrylic acid, ethlylene glycol dimethacrylate, benzoyl peroxide, and acetonitrile, as a monomer, crosslinker, initiator, and porogen, respectively. The template was removed by using methanol:acetic acid 90:10 (v/v). The physical characteristics of the polymers were investigated by Fourier Transform Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The rebinding studies were carried out by batch methods. The results exhibited that the MIPs was able to adsorb the α-mangostin at pH 2 and the contact time of 180 min. The kinetic adsorption data of α-mangostin performed the pseudo-second order model and followed the Langmuir isotherm model with the adsorption capacity of 16.19 mg·g-1. MIPs applied as a sorbent material in solid-phase extraction, namely molecularly imprinted solid-phase extraction (MISPE) and it shows the ability for enrichment and clean-up of α-mangostin from the complex matrix in medicinal herbal product and crude extract of mangosteen (Garcinia mangostana L.) pericarp. Both samples, respectively, which were spiked with α-mangostin gives recovery more than 90% after through by MISPE in all concentration ranges.

• FOCUS: LIFE SCIENCE
• /
• 제1호
• /
• pp.5.1-5.3
• /
• 2024

The document discusses the regeneration of Partisil/Partisphere ion-exchange columns in chromatography. It mentions that column efficiency can diminish with use due to the accumulation of sample and/or mobile phase impurities at the head of the column. This can lead to a change in back pressure, lower column efficiency, and sometimes a change in selectivity. The document outlines a procedure that may restore column performance. The document also provides everyday practices to enhance the lifetime of a column. These include using only high-purity HPLC solvents and buffers, using freshly prepared mobile phases and buffers, filtering mobile phases to remove particulates, using appropriate sample clean-up procedures, using a guard column or pre-column filter, and working within the pressure and flow rate limitations of the column. For the regeneration of Partisil/Partisphere SAX, SCX, WAX, and WCX columns, the document suggests passing 20 column volumes of various mobile phases through the column. These include a buffer wash, distilled water, an acid wash, a chelating wash, a methanol wash, and a buffer for separation. The document emphasizes that not all of these wash steps are required for every column clean-up and that some chromatographers require only a combination of certain steps.

• 공업화학
• /
• 제23권6호
• /
• pp.529-533
• /
• 2012

본 연구에서는 온순조건에서 용매 추출된 석탄의 물성과 추출특성을 고온조건에서 추출된 석탄의 것과 비교하였다. 석탄의 용매 추출 특성을 알아보기 위해 추출실험에는 아역청탄(Kideco 탄)과 극성 용매인 N-methyl-2-pyrrolidinone (NMP)을 사용하였다. 온순조건과 고온조건에서 석탄의 용매 추출 특성을 알아보기 위해 추출온도 변화, 용매 재사용에 따른 추출 특성 변화에 대한 실험을 하였다. 실험결과 추출온도가 증가할수록 추출수율과 추출탄의 발열량은 증가 하였고, 회분농도는 감소하였다. FT-IR 분석 결과 고온조건($350^{\circ}C$)에서 추출한 추출탄의 표면에 C=O 아미드 결합, 방향족 에테르, 그리고 지방족 에테르 그룹들이 온순조건($150{\sim}300^{\circ}C$)에서 추출한 것에 비해 증가하는 것으로 나타났다. MALDI-TOF/MS 분석 결과 온순조건에서는 300~500 m/z 범위 이하의 작은 분자들이 주로 추출되었고, 고온조건에서는 500~1500 m/z 범위에 걸쳐 상대적으로 큰 분자들까지 추출됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1342-1344
• /
• 2002

Wind is a significant and valuable renewable energy resource. It is safe and abundant and can make an important contribution to future clean, sustainable and diversified electricity supplies. Unlike other sources of energy, wind does not pollute the atmosphere nor create any hazardous waste. In some countries wind energy is already competitive with fossil and nuclear power even without accounting for the environmental benefits of wind power. The cost of electricity from conventional power stations does not usually take full account of its environmental impact (acid rain, oil slick clean up, the effects of climate change, etc). In this paper, a transient phenomenon simulation method for Wind Power Generation System(WPGS) under real weather conditions has been proposed. The simulation method is expected to be able to analyze easily under various conditions with considering the sort of wind turbine, the capacity of system and the converter system. Wind turbine connected to the synchronous generator and power converter was simulated.