• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.150-162
• /
• 2020

The proprietary post-combustion CO₂ solvent (KoSol) developed by the Korea Electric Power Research Institute (KEPRI) was applied at the Shanghai Shidongkou CO₂ Capture Pilot Plant (China Huaneng CERI, capacity: 120,000 ton CO₂/yr) of the China Huaneng Group (CHNG) for performance evaluation. The key results of the pilot test and data on the South Korean/Chinese electric power market were used to calculate the predicted cost of CO₂ avoided upon deployment of CO₂ capture technology in commercial-scale coal-fired power plants. Sensitivity analysis was performed for the key factors. It is estimated that, in the case of South Korea, the calculated cost of CO₂ avoided for an 960 MW ultra-supercritical (USC) coal-fired power plant is approximately 35~44 USD/tCO₂ (excluding CO₂ transportation and storage costs). Conversely, applying the same technology to a 1,000 MW USC coal-fired power plant in Shanghai, China, results in a slightly lower cost (32~42 USD/tCO₂). This study confirms the importance of international cooperation that takes into consideration the geographical locations and the performance of CO₂ capture technology for the involved countries in the process of advancing the economic efficiency of large-scale CCS technology aimed to reduce greenhouse gases

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.297-305
• /
• 2012

In recent large-scale semiconductor manufacturing clean rooms, the energy consumption of outdoor air conditioning systems to heat, humidify, cool and dehumidify incoming outdoor air represents about 45% of the total air conditioning load required to maintain a clean room environment. Therefore, the energy performance evaluation and analysis of outdoor air conditioning systems is useful for reducing the outdoor air conditioning load for a clean room. In the present study, an experiment was conducted to compare the energy consumption of outdoor air conditioning systems with a simple air washer, an exhaust air heat recovery type air washer and a DCC return water heat recovery type air washer. It was shown from the present lab-scale experiment with an outdoor air flow of 1,000 $m^3/h$ that the exhaust air heat recovery type and DCC return water heat recovery type air washer outdoor air conditioning systems were more energy-efficient for the summer and winter operations than the simple air washer outdoor air conditioning system and furthermore, the DCC return water heat recovery type one was the most energy-efficient in the winter operation.

• Environmental Analysis Health and Toxicology
• /
• v.26
• /
• pp.7.1-7.9
• /
• 2011

Objectives: This study was conducted to examine the relationship between crude oil exposure and physical symptoms among residents participating in clean-up work associated with the Hebei Spirit oil spill, 2007 in Korea. Methods: A total of 288 residents responded to a questionnaire regarding subjective physical symptoms, sociodemographic characteristics and clean-up activities that occurred between two and eight weeks after the accident. Additionally, the urine of 154 of the respondents was analyzed for metabolites of volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs) and heavy metals. To compare the urinary levels of exposure biomarkers, the urine of 39 inland residents who were not directly exposed to the oil spill were analyzed. Results: Residents exposed to oil remnants through clean-up work showed associations between physical symptoms and the exposure levels defined in various ways, including days of work, degree of skin contamination, and levels of some urinary exposure biomarkers of VOCs, metabolites and metals, although no major abnormalities in urinary exposure biomarkers were observed. Conclusions: This study provides evidence of a relationship between crude oil exposure and acute human health effects and suggests the need for follow-up to evaluate the exposure status and long-term health effects of clean-up participants.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.419-428
• /
• 2023

Seawater has been used to cool devices in nuclear power plants. However, the pipes used to transport seawater are vulnerable to corrosion; hence, the inner side of pipelines is coated with an epoxy layer as prevention. Upon coating damage, the pipe becomes exposed, and corrosion progresses. The major cause is widely known as cavitation corrosion, causing the degradation of mechanical properties. In this study, corroded specimens were prepared using cavitation and immersion methods to clarify the degradation trend of mechanical properties with corrosion. Three different types of epoxy coatings were used, and accelerated cavitation procedures were composed of amplitudes of 15 ㎛, 50 ㎛, and 85 ㎛ for 2 h, 4 h, and 6 h. The immersion periods were 3 and 6 weeks. We conducted instrumented indentation tests on all degradation samples to measure mechanical properties. The results showed that higher cavitation amplitudes and longer cavitation or immersion times led to more degradation in the samples, which, in turn, decreased the yield strength. Of the three samples, the C coating had the highest resistance to cavitation and immersion degradation.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.135-144
• /
• 2024

The present study investigated waste medium from a domestic shiitake mushroom farm, which was pyrolyzed to produce biochar. The yield rate of the biochar was compared after exposure to various pyrolysis temperature conditions, and the characteristics of the produced biochar were analyzed. The present study focused on the carbon dioxide (CO₂) adsorption capacity of the resulting biochar. The CO₂ adsorption capacity exhibited a correlation with the pyrolysis temperature of the biochar, with increasing temperatures resulting in higher CO₂ adsorption capacities. Brunauer-Emmett-Teller (BET) analysis showed that the CO₂ adsorption capacity was related to the surface area and pore volume of the biochar. Calcium is added to the process of producing mushroom medium. Experiments were performed to investigate the CO₂ adsorption capacity of the biochar from the waste medium with the addition of calcium. In addition, CO₂ adsorption experiments were conducted after the pyrolysis of kenaf biochar with the addition of calcium. The results of these experiments show that calcium affected the CO₂ adsorption capacity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.359-363
• /
• 2009

This study was performed to establish a rapid and simple analytical method for niacin (nicotinic acid and nicotinamide) using HPLC. A pretreatment method for the extraction and clean-up of niacin in infant formula sample and an instrumental condition for HPLC were optimized. Niacin was extracted by 5 mM hexanesulfonate with ultrasonication for 30 min. For the clean-up of the sample, the extract was applied to a HLB cartridge, and then niacin was eluted from the cartridge using 5 mL of 80% methanol after washing with 5 mL of n-hexane. The total recoveries were $83{\sim}104%$ and relative standard deviation were in the range of $1.5{\sim}3.5%$ during the extraction and clean-up process. Niacin was determined by gradient elution with sodium hexanesulfonate/methanol buffer as a mobile phase and a photodiode array detector (260 nm). It showed a high linearity between the content of niacin and the peak area ($r^2$=1.000) in the range of $0.02{\sim}10.0$ mg/L of nicotinic acid and nicotinamide. The detection limit was 0.02 mg/L (0.2 mg/kg in the sample). The method was successfully applied for the determination of niacin in infant formula. Total niacin contents were in the range of $53.5{\sim}140.3$ mg/kg.

• Clean Technology
• /
• v.26 no.3
• /
• pp.168-176
• /
• 2020

The introduction of the Korea toxics use reduction (TUR) program to build a clean society is generally evaluated based on social economic criteria. Among various techniques, benefit-cost analysis is the most commonly used. This method is focused on the calculation and comparison of all the benefits and costs attributable to the TUR program. However, since it is reasonable to consider not only economic criteria but also policy criteria in the process of evaluation, it is necessary to reflect on the criteria weights found in the benefits and costs. This study aims at developing a new evaluation technique to achieve this purpose and apply it to the Korean TUR program to be implemented in 2020. This study selected competitiveness, toxic substances' emission reduction ratio, and health improvement as policy criteria. The Analytic Hierarchy Process (AHP) technique was initially used to calculate the weight and then, based on the results, the concept of information entropy introduced by Claude Shannon was used to eliminate subjective bias. As a result of the study, it was found that the revised benefit-cost analysis considering the weights of the policy criteria, as well as the existing economic criteria, could be a reasonable alternative in evaluating the feasibility of TUR regulations for highly toxic substances.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.6
• /
• pp.471-478
• /
• 2009

The specific some types of compressors are appropriate for a use in hydrogen gas station. Metal diaphragm type of hydrogen compressor is one of them, which can satisfy the critical requirements of maintaining gas purity and producing high pressure over 850 bar. The objective of this study is to investigate an characteristics of compression through two-way Fluid-Structure-Interaction (FSI) analysis as bulk modulus and initial volume of oil independently varies. Deflection of diaphragm, oil density, gas and oil pressure were analyzed during a certain period of compression process. According to the analysis results, bulk modulus and initial volume remarkably affected deflection of diaphragm, oil density, gas and oil pressure. The highest gas pressure were attained with the highest bulk modulus of $7e^9\;N/m^2$ and the lowest initial oil volume of 80 cc.

• Restorative Dentistry and Endodontics
• /
• v.38 no.3
• /
• pp.154-159
• /
• 2013

Objectives: The aim of this study was to compare the cleaning efficacy of different final irrigation regimens in canal and isthmus of mandibular molars, and to evaluate the influence of related variables on cleaning efficacy of the irrigation systems. Materials and Methods: Mesial root canals from 60 mandibular molars were prepared and divided into 4 experimental groups according to the final irrigation technique: Group C, syringe irrigation; Group U, ultrasonics activation; Group SC, VPro StreamClean irrigation; Group EV, EndoVac irrigation. Cross-sections at 1, 3 and 5 mm levels from the apex were examined to calculate remaining debris area in the canal and isthmus spaces. Statistical analysis was completed by using Kruskal-Wallis test and Mann-Whitney U test for comparison among groups, and multivariate linear analysis to identify the significant variables (regular replenishment of irrigant, vapor lock management, and ultrasonic activation of irrigant) affecting the cleaning efficacy of the experimental groups. Results: Group SC and EV showed significantly higher canal cleanliness values than group C and U at 1 mm level (p < 0.05), and higher isthmus cleanliness values than group U at 3 mm and all levels of group C (p < 0.05). Multivariate linear regression analysis demonstrated that all variables had independent positive correlation at 1 mm level of canal and at all levels of isthmus with statistical significances. Conclusions: Both VPro StreamClean and EndoVac system showed favorable result as final irrigation regimens for cleaning debris in the complicated root canal system having curved canal and/or isthmus. The debridement of the isthmi significantly depends on the variables rather than the canals.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.45-52
• /
• 2015

Purpose: Currently, since the energy consumption of apartment buildings is on the rise, it is necessary to reduce the total amount of the energy through the survey and analysis of energy consumption data. Although various studies for energy efficiency have been conducted, studies are more focused on the measurement of energy by using analysis tools. In addition, the studies are sufficient to analyze real data of the city gas in apartment buildings. Therefore, the objective of this study is to identify the property of annual and $1m^2$ city gas amount according to the exclusive dwelling area. Method: To achieve the objective, this study used the statistics such as descriptive, correlation, and analysis of variance (ANOVA) analysis. Result: As a result, there is positive relationship between the annual average of city gas and the exclusive dwelling area. However, in the case of $1m^2$ city gas amount, a negative relationship is mored. In the future, the findings of this study can be applied to develop the prediction model of the city gas consumption and implement it as basic data for energy efficiency of apartment buildings of future.