• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.871-877
• /
• 2018

Storing the surplus energy from renewable energy resource is one of the challenges related to intermittent and fluctuating nature of renewable energy electricity production. $CO_2$ methanation is well known reaction that as a renewable energy storage system. $CO_2$ methanation requires a catalyst to be active at relatively low temperatures ($250-500^{\circ}C$) and selectivity towards methane. In this study, the catalytic performance test was conducted using a pressurized bubbling fluidized bed reactor (Diameter: 0.025 m and Height: 0.35 m) with $Ni/{\gamma}-Al_2O_3$ (Ni70%, and ${\gamma}-Al_2O_3$30%) catalyst. The range of the reaction conditions were $H_2/CO_2$ mole ratio range of 4.0-6.0, temperature of $300-420^{\circ}C$, pressure of 1-9 bar, and gas velocity ($U_0/U_{mf}$) of 1-5. As the $H_2/CO_2$ mole ratio, temperature and pressure increased, $CO_2$ conversion increases at the experimental temperature range. However, $CO_2$ conversion decreases with increasing gas velocity due to poor mixing characteristics in the fluidized bed. The maximum $CO_2$ conversion of 99.6% was obtained with the operating condition as follows; $H_2/CO_2$ ratio of 5, temperature of $400^{\circ}C$, pressure of 9 bar, and $U_0/U_{mf}$ of 1.4-3.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.3
• /
• pp.209-218
• /
• 2005

To find a suitable metal component in oxygen carrier particles for chemical-looping hydrogen generation system(CLH), oxygen transfer capacities of metal components were compared and Ni has been selected as the best metal component. The proper operating conditions to achieve high hydrogen generation rate have been investigated based on the chemical-equilibrium composition analysis for water splitting reactor. Moreover, suitable compositions of syngas from gasifier of heavy residue to achieve high energy efficiency have been investigated by calculation of heat of reaction. Based on the selected operating conditions, the best configuration of two interconnected fluidized beds system for the chemical-looping hydrogen generator has been investigated as well.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.383-386
• /
• 1997

Electrostatic suspension is a method to levitate an object by using electrostatic forces. Its main advantage is to levitate objects without any mechanical contact which fulfills the requirement of an object handling in ultra clean environment. In this paper, the electrostatic suspension system for film-like thin plate such as aluminum sheet, is designed and controlled. In contrast with the conventional electrostatic suspension system which requires the costly and bulky high-voltage amplifiers, it is suggested to use the switching voltage control method in consideration of real industrial application for the handling of such flexible bodies. Some experimental results show that the developed electrostatic suspension system shows good performances to levitate flexible film-like thin plate.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.67-70
• /
• 2004

Semiconductor Wet Station has a very important place in semiconductor process. It is important that to discharge chemical with fit concentration and temperature using chemical supply system for clean process. The chemical supply system which is used currently is not only difficult to make a fit mixing rate of chemical which is need in clean' process, but also difficult to make fit concentration and temperature. Moreover, it has high stability but it is inefficient spatially because its volume is great. We propose In-line System to improve system with implement analysis of fluid and thermal transfer on chemical supply system and understand problem of system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1723-1726
• /
• 2003

Clean and well maintained roadway signs are important for preserving driver's safety. The existing signs on the roadway must be periodically re-painted in order to maintain clean state. However, current sign painting operations are manually performed now. These are very slow and workers are exposed to very dangerous and hazard working environment. In this paper, we present the method for automating this job with gantry robot and spray system. In addition, we suggest two design concepts to resolve the problem that it is impractical to make the gantry system so big as to cover whole lane width. In order to show the validity of this system, the painting operation is simulated and experimentally executed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.443-446
• /
• 2006

For the satisfaction of the high engine performance and the low radiated sound pressure simultaneously, the duct length in the vehicle intake/exhaust system should be tuned carefully in the design and development stage of a vehicle. This study was concerned about the effects of intake duct length in clean and dirty sides on the radiated sound emitted from an inlet. An index derived from the existing prediction model of radiated sound pressure was employed to determine which duct was more influential to the radiated sound. Comparing the experimental and predicted results, we found that the change of dirty-side duct length caused a larger change than that in the clean side in the radiated sound level from a tested intake system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.111-121
• /
• 2005

이 연구는 광화학적 물분해 수소제소 기술의 일환으로 수행 중인 광촉매와 바이오촉매를 복합한 시스템 활용 기술에서 광촉매가 갖는 물리적 특성의 영향을 파악하고자 진행되었다. 다양한 물리적 특성을 갖는 광촉매 얻기 위하여 상용광촉매, 수열화법(HT-TiON), 리고 저온합성법(LT-TiON) 등을 이용하여 샘플을 준비하였다. 가시광 감응을 위하여 암모니아나 triethylamine 처리를 하여 질소를 도핑도 시도하였다. 시도된 복합시스템은 인위적인 전자주개 없이 수소를 발생시키는 결과를 보여주었으나, 광촉매로부터 엔자임으로의 전자전달 부분이 율속단계로 확인되었다. 사용된 광촉매 샘플에 따라 수소발생량에 차이가 나타난 결과로 광촉매의 미세구조 (결정상, 결정도, 기공 크기 및 비표면적 등)이 중요한 역할을 하는 것으로 판단되었다. 얻어진 결과들을 활용하여 재료들이 고정화된 새로운 시스템 구성을 제안하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2004.11a
• /
• pp.10-18
• /
• 2004

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.20 no.6
• /
• pp.391-408
• /
• 1991

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2013

Bio Clean Room(BCR) and pharmaceutical product manufacturing facilities require careful assessment of many factors, including HVAC, controls, room finishes, process equipment, room operations, and utilities. Flow of equipment, personnel, and product must also be considered along with system flexibility, redundancy, and maintenance shutdown strategies. It is important to involve designers, operators, commissioning staff, quality control, maintenance, constructors, validation personnel, and the production representative during the conceptual stage of design. Critical variables for room environment and types of controls vary greatly with the clean space's intended purpose. It is particularly important to determine critical parameters with quality assurance to set limits and safety factors for temperature, humidity, room pressure, and other control requirements. In this paper, oxygen cluster ion equipment was utilized in order to enhance the indoor air quality and to prevent the airborne infection of ward in hospital. Moreover, the performance test of the equipment was also performed in order to develop the optimal sterilization system of BCR using the equipment.