• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.49-55
• /
• 2010

Marine oil spill accidents not only devastates marine ecosystem but also Ins significant adverse socio-economic impact on local community whose living is dependent on clean marine system Although the Marine Environment Management Act of the Republic of Korea stipulates tim marine pollution impact survey must be conducted at the time of the oil spill, the articles do not provide specifics or concrete survey items for socio-economic impact assessment Moreover, there are redundancy questions in the provisions related to socio-economic impact assessment. This paper examined several difficulties encountered in carrying out the socio-economic impact assessment for marine oil spill as required in the law, and presented some recommendation., for the plan to improve the assessment mechanism systematically through the development of the research categories and indicators of socio-economic impact assessment.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.63-71
• /
• 2017

As the demand for automation (or autonmation) or clean workplace has grown, the interest in the knowledge and skill regarding safety is rising in manager duty. Moreover, the importance of severity rate of injury has increased due to the enlargement of industry scale, even safety management area has developed. Thus, it is important that production managers, the core of the line process, realize the safety in their production line, even if a safety manager acts as a staff. However, in the duty oriented National Competency Standard (NCS), the education about the safety duty of production management part is insufficient. According to NCS, it is calculated production managers receive only 6.7% of whole safety education regarding the duty related the safety management for production manager in mechanical industry. However, the ability in safety is more demanded from production managers as the concept of "production and safety" turns into the concept of "production with safety". And then in this paper, we will compare and analyze the safety management duty in Korean NCS and the safety management duty in State Leaders Connecting Learning to Work in US manufacturing industry, in terms of the duty of the production manage in mechanical industry (05). And, we will develop the safety duty education system for production manager, by classifying the safety education in domestic mechanical industry into knowledge education, skill education, and attitude education with using AHP(Analytic Hierarchy Process).

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.5
• /
• pp.503-512
• /
• 2012

There is a new power generation system such as direct coal fuel cell (DCFC) with a solid oxide electrolyte operated at relatively high temperature. In the system, it is of great importance to feed coal continuously into anodic electrode surface for its better contact, otherwise it would reduce electrochemical conversion of coal. For that purpose, it is required to improve the electrochemical conversion efficiency by using either rigorous mixing condition such as fluidized bed condition or just by recirculating coal particle itself successively into the reaction zone of the system. In this preliminary study, we followed the second approach to investigate how significantly particle recycle would affect the coal conversion efficiency. As a first phase, coal conversion was analyzed and evaluated from the thermochemical reaction of carbon with air under particle recirculating condition. The coal conversion efficiency was obtained from raw data measured by two different techniques. Effects of temperature and fuel properties on the coal conversion are specifically examined from the thermochemical reaction.

• Journal of Bio-Environment Control
• /
• v.2 no.1
• /
• pp.16-26
• /
• 1993

A sundry system is one of popular systems for composting livestock manure, of which main honest is to utilize unlimited, clean, and free solar radiation. A sundry system with a composter of two horizontal screw-type concrete ducts at different height, was constructed and operated for three days for each test in May, 1993, to evaluate its composting performance. Four treatments of the mixture ratio of swine manure and saw dust (manure : sawdust= 1 : 1.25, 1 : 1, 1 : 0.7, 1 : 0.5) were implemented to evaluate the effect of the mixture ratio on degradation of the composting materials of a sundry system with a screw-type composter. Maximum temperature of the composting materials was over 5$0^{\circ}C$ at D1 or D2 (one or two days after operation starts) for each test. Mean C/N ratio and water contents of the materials were reduced by more than 15 and 20％, respectively. Microbial density of each test showed a typical variation with the lapse of the composting time. Mesophilic microorganism seemed to play more important role on degradation of the materials than thermophilic. A sundry system with a screw-type composter can be considered as a feasible system on basis of maturity data. The conclusion was completely reverse from that of Choi et at., although both adopted a sundry system. A further study is recommended to pursue the cause of better performance of the screw-type composter, whether it was due to affirmative weather or more efficient composter.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.91-94
• /
• 2016

This study is focused on the development and application of automotive lighting system simulator device to help understanding of the repair and overhaul, electrical instrumentation and automotive circuit checks the contents of the automotive electrical system. The purpose of this study is to define the circuit numeracy, circuit repair preparation skills, detachable power, circuit analysis capabilities, inspection and measurement capability, and repair (problem solving) skills, through the cultivation of clean ability to increase the understanding of electrical equipment maintenance circuitry to verify the improvement of the repair. Automotive electrical device requires understanding of the invisible parts, and understanding of the various symbols and complex circuitry to measure the basic checks and repair are indispensable. This paper would likely contribute to help students to gain more interest in the fields that they feel difficult such as basic skills which necessary to cultivate a variety of electrical equipment fault diagnosis of the basic knowledge needed for electric cars practical.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.235-242
• /
• 2006

This study experimentally investigates the performance improvement of the heat pump by adopting the hot gas bypass method and using the internal heat exchanger according to the automatic defrost test conditions of ISO 5151 This study compares the hot gas bypass method with the time step method, and investigates effect on outdoor coil fan speed when the hot gas of compressor outlet enter outdoor coil inlet after the frost formation. The tests were made for the fan speeds of the outdoor coil controlled at 90, 60 and 30% of the normal speed together with the case of the stationary fan. The performance of the heat pump is evaluated by variables such as COP, heat capacity, and the average COP during the 210 minutes heating mode. Results show that average COP of the hot gas bypass mettled is $2.2{\sim}6%$ higher than that of the time step method. When the outdoor coil fan speed is 60% (780 rpm) of the normal speed, it shows the best COP and heating capacity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4250-4256
• /
• 2011

Mn catalyst promoted with Cu were prepared and tested for selective catalytic reduction of $NO_x$ with $NH_3$. Performance of each catalyst was investigated for $NO_x$ activity while changing temperature, space velocity, water content and $O_2$ concentration. Hydrogen conversion efficiency of catalyst was also measured in the $H_2$-TPR system. The inhibition effect of water on catalyst was investigated with the on-off control of water supply. High activity of Mn-Cu catalyst was observed for $160{\sim}260^{\circ}C$. It is found that increase of oxygen concentration acts as a promotor to the increase of catalyst activity but water content acts as a inhibitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.631-634
• /
• 2004

The method that exists in Photodynamic Therapy uses Photosensibility drug strongly Influencing tumour accumulation together with photochemical laser effect and makes the structure of tumour be localized and become extinct. The intracavity transformation of the Nd :YAP main radiation 1079 nm was Raman converted in barium nitrate crystal and the Stokes frequency (1216 nm) was doubled using KTP or RTA crystals. The LiF or Cr:YAG crystals are used for the Q-switch. The radiation Parameters were obtained at 100 Hz pump repetition frequency. The average power at 608 nm radiation with LiF and KTP was 700 mW at multi-mode generation. The 3-6 single 10-15 ns pulses were generated during one cycle of pumping. The doubling efficiency with RTA was two times more than with KTP. The cells of Ehrlich adenocarcinoma (0.1 ml) were i.m. implanted in hind thighs of ICR white non-imbred mice. The cells were preliminarily diluted in medium 199 in the ratio of 1 to 5. HpD was intravenous administered in a dose of 10 mg/kg. The left clean-shaven hind leg was irradiated with laser light 21-27 hours after the administration of the preparation. The right non-Irradiated leg of each animal served as a control. The animals with the transplanted tumor that were not injected with HpD sewed as a control to estimate the complex effect (HpD+ irradiation). Before the administration of HpD and on 3 and 4 days after irradiation the tumor size was measured and the percent of the tumor growth inhibition was calculated. The results of animal treatments has shown high efficiency of PDT method for cancer treatment by means 0.608 m high power pulse solid state laser.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.75-80
• /
• 2018

The problem of water shortages and water related disasters caused by climate change has increased the seriousness of water problems and the importance of water treatment technology capable of securing clean water is expanding. In this study, we analyzed not only the water pollutant generated by the filtration system technology of various water treatment technologies but also the indirect greenhouse gas emissions generation, and analyzed the influence on the environment. The subjects of study are Fabric Filter, Reverse Osmosis System and Pressurized Microfiltration Device which are widely used for water treatment and we analyzed the impact on the environment using the Life Cycle Assessment (LCA) method using the electricity amount necessary for use, the water purification efficiency, the throughput per ton and the cost. The amount of greenhouse gas generated when the Pressurized Microfiltration Device operates for 1 year is $2.15E+04kg\;CO_2-eq$., Fabric Filter is $3.29E+04kg\;CO_2-eq$., and Reverse Osmosis System is $1.68E+05kg\;CO_2-eq$. As a result of analyzing the amount of greenhouse gas generated at the time of purifying 1 ton of the Pressurized Microfiltration Device and the conventional filtration system, the Pressurized Microfiltration Device was $20.5g\;CO_2-eq$., Fabric Filter was $34.7g\;CO_2-eq$., and Reverse Osmosis System was $191.7g\;CO_2-eq$. The amount of greenhouse gas generated was calculated to be 41.0% less than that of the Fabric Filter by the Pressurized Microfiltration Device and 89.3% less than the Reverse Osmosis System. From the viewpoint of climate change, it is necessary to select a filtration system that takes climate change into account, not from the viewpoint of water quality removal efficiency and economic efficiency according to future water treatment applications, and it is necessary to select a water treatment filtration system more researches and improvements will be made for.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.37-45
• /
• 2020

The development process of deep learning is an iterative task that requires a lot of manual work. Among the steps in the development process, pre-processing of learning data is a very costly task, and is a step that significantly affects the learning results. In the early days of AI's algorithm research, learning data in the form of public DB provided mainly by data scientists were used. The learning data collected in the real environment is mostly the operational data of the sensors and inevitably contains various noises. Accordingly, various data cleaning frameworks and methods for removing noises have been studied. In this paper, we proposed a method for detecting and removing noises from time-series data, such as sensor data, that can occur in the IoT environment. In this method, the linear regression method is used so that the system repeatedly finds noises and provides data that can replace them to clean the learning data. In order to verify the effectiveness of the proposed method, a simulation method was proposed, and a method of determining factors for obtaining optimal cleaning results was proposed.