• 한국작물학회지
• /
• 제53권3호
• /
• pp.292-296
• /
• 2008

Clay-coated rice seeds (clay-coated seeds A and B) were directly sown on dry paddy and their growth and yield were compared with the normal drill-sown seeds on dry flat paddy. In clay-coated seeds, germination was 1 day earlier and the emergence rate was higher up to 5% than that of normal drill-sown seeds. But the apparent number of seedling stand per $m^2$ was lower than that of normal drill-sown seeds, which is due to the smaller amount of seeding in clay-coated seeds. At the early growth stage, the plant height of clay-coated seeds A was taller than that of drill-sown seeds, while the plant height of clay-coated seeds B was 0.7 cm shorter than that of drill-sown seeds. At the late growth stage, however, the difference was insignificant in both cases. The maximum tillering stage was 10 days earlier in drill-sown seeds. Lodging index was the lowest in clay-coated seeds B and there was no difference between clay-coated seeds A and drill-sown seeds. The ratio of stem base weight, culm diameter and culm wall thickness were higher in clay-coated seeds, while the lower internodes (4th, 5th and 6th) length was shorter in claycoated seeds than in drill-sown seeds. In clay-coated seeds, the number of panicle per $m^2$ was smaller, while the number of spikelet per panicle was a little larger than in drill-sown seeds. The rate of ripened grain and brown rice 1,000 grain weight were lower in the clay-coated seeds, thus the yield was $98{\sim}99%$ level of drill-sown seeds. Considering that the amount of seeding in clay-coated seeds was two-thirds of that in drill-sown seeds, it is expected that clay coating method could become an additional technique for direct seeding cultivation.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.678-684
• /
• 1996

기계화 파종으로 파종작업의 생력화를 위하여 배추종자 및 볍씨 pelleting에 대해서 Pelleting 물질과 접착제에 대한 기초적인 시험을 실시하였다. 그 중 pellting 재료와 접착제에 따른 pellet의 모양형성, 경도, 발아에 대하여 조사한 결과 다음과 같은 결과를 얻었다. 1. Pellet 종자의 모양형성은 접착제를 pelgel, AG-11을 사용하고 재료로는 paper clay, lime, PLL-11, coal ash등을 사용할 때 가장 우수하였다. 2. Pellet 종자의 경도는 pelleting 물질에 따라, 또는 접착제의 종류에 따라 공히 영향이 켰다 3. 모양형성과 경도를 함께 고려할 때 가장 우수한 pelleting 재료는 PLL-11 및 paper clay이었고, 접착제로는 pelgel과 AG-11이 었다. 4. Pelgel을 접착제로 하고 여러 가지 재료를 이용한 pellet 종자의 발아는 대체적으로 다양한 발아저해 현상을 보였으나 PLL-11을 재료로하고 여러 가지 접착제로 pelleting한 종자에서는 발아에 지장이 없었다. 그 중 PLL-11을 재료로 한 pellet 종자에서 가장 발아을이 우수하였고 zeolite를 재료로 한 종자에서 발아억제 현상이 가장 심했다. 5. AG-11과 PLL-11을 재료로 한 볍씨 Pelleting 종자의 발아는 무처리와 같았다 6. PLL-11을 재료로 하고 여러 가지 접착제를 이용한 pellet종자에서는 발아저해가 피의 나타나지 않았다. 7. Pellet 물질의 추출물을 이용한 발아에서 zeo-lite와 bentonite추출물에서 약간의 발아저해현상이 나타났다. 8. Pellet 물질의 추출물 산도는 zeolite와 ben-tonite에서 가장 높았고, 전기전도도도 역시 zeolite와 bentonite에서 가장 높았다.