• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.459-469
• /
• 2002

We have remolded marine clay sample collected along the vertical and horizontal directions and investigated the characteristics of the consolidation constants by SCT and CRSC methods. We have studied also on consolidation chracteristics and application for weathered granite soil using SCT and CRSC methods for undisturbed and disturbed samples. As the result, values of pre-consolidation stress, compression index, excessive pore pressure, pore water pressure ratio of the marine-clay were different due to different test methods(SCT and CRSC) and sampling directions(vortical and horizontal directions). Disturbed and undisturbed samples of the weathered granite soil have showed similar change aspect like marine clay during over-consolidatied and normally consolidatied stages.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.595-604
• /
• 2021

With the advantages of high permeability and strength, pervious concrete piles can be suitable for ground improvement with high water content and low bearing capacity. By comparing the strength and permeability of pervious concrete with different aggregate sizes (3-5 mm and 4-6 mm) and porosities (20%, 25%, 30% and 35%), the recommended aggregate size (3-5 mm) and porosity (30%) can be achieved. The model tests of the pervious concrete piles in soft soil (silt and clay) foundations were conducted to evaluate the bearing characteristics, results show that, for the higher consolidation efficiency of the silty foundation, the bearing capacity of the silty foundation is 16% higher, and the pile-soil stress ratio is smaller. But when it is the ultimate load for the piles, they will penetrate into the underlying layer, which reduces the pile-soil stress ratios. With higher skin friction of the pile in the silty foundation, the pile penetration is smaller, so the decrease of the pile axial force can be less. For the difference in consolidation efficiency, the skin friction of pile in silt is more affected by the effective stress of soil, while the skin friction of pile in clay is more affected by the lateral stress. When the load reaches 4400 N, the skin friction of the pile in the silty foundation is about 35% higher than that of the clay foundation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.336-341
• /
• 1996

This study was conducted to investigate the effects of compost application on the soil loss and physico-chemical properties at the slope land from 1990 to 1991. Lysimeters with 15% slope. 5m slope length. 2m width and 1.2m depth were constructed in 1984 and filled with sandy loam, loam, clay loam. and clay soils. Treatments were bare soil, compost(1.5ton/10a) and non-compost with soybean-barley cropping system from 1984. Losses of soil were increased with the order of sandy loam, clay, loam and clay loam. Run-off was increased with the order of sandy loam, loam, clay loam and clay, but leachate was decreased with the same order. Compost treatments decreased 33.6-44.6% of soil loss and 17.0-24.0% of run-off but increased 17.1-33.7.% of leachate as compared with the non-compost treatments. The amount of soil loss was positively correlated with the amount of run-off by Y = 12.125+0.063X (r=$0.970^{**}$)and negatively correlated with the leachate by Y=43.425-0.096X(r=$-0.917^{**}$). The application of compost increased soil pH, OM, CEC and extractable cations. Application of compost decreased bulk density but increased porosity, water stable aggregate and available water. These results provide that the compost application plays an important role in conserving soil and water, and improving soil physico-chemical properties.

• Journal of Forest and Environmental Science
• /
• v.37 no.1
• /
• pp.14-24
• /
• 2021

A plant community is a group of populations that coexist in space and interact directly or indirectly with the environment. In this paper, we determined the pattern of tree species composition in response to soil variables in Khadimnagar National Park (KNP), which is one of the least studied tropical forests in Bangladesh. Soil and vegetation data were collected from 71 sample plots. Canonical Correspondence Analysis (CCA) with associated Monte Carlo permutation tests (499 permutations) was carried out to determine the most significant soil variable and to explore the relationship between tree species distribution and soil variables. Soil pH and clay content (pH with p<0.01 and Clay content with p<0.05) were the most significant variables that influence the overall tree species distribution in KNP. Soil pH is related to the distribution and abundance of Syzygium grande and Magnolia champaca, which were mostly found and dominant species in KNP. Some species were correlated with clay content such as Artocarpus chaplasha and Cassia siamea. These observations suggest that both the physico-chemical properties of soil play a major role in shaping the tree distribution in KNP. Hence, these soil properties should take into account for any tree conservation strategy in this forest.

• Journal of the Korean earth science society
• /
• v.26 no.8
• /
• pp.828-835
• /
• 2005

The purpose of this study is to clarify the landform development of fluvial terrace and the soil characteristics occurring on the terrace deposit. In order to achieve the purpose, the characteristics of soil profiles, the physic-chemical properties of soils that are developed on terrace deposits and X-ray diffraction analysis of clay were investigated. The horizon of Al in the high fluvial surface is silt clay loam of red (2YR 4/6). The soil structure is a developed granular structure. The horizon of B1 is silt clay reddish-brown (2.5YR 4/6). The soil structure is a medium subangular blocky structure. This red soil structure is made on heavy textured and compactly packed parent materials of high terrace sediments and usually has A-B-C profile. In most cases, clay accumulations in B-horizon and clay cutans on ped surfaces are observed, which mean the formation of agrillic horizon. As the result of this study, soils derived from fluvial terrace deposits on high fluvial surfaces are considered paleo-red soil which were developed by pedogenese-strong desilicification and rubefaction and strong leaching of bases- under warmer bio-climatic condition during in the old Pleistocene period.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.129-136
• /
• 2013

This research was conducted to investigate effects of acid buffering capacity and soil component in treatment of phenanthrene using electrokinetic-Fenton process. In Hadong clay of high acid buffering and low iron oxide content, it was difficult to oxidize phenanthrene due to shortage of iron catalyst and scavenger effect of carbonate minerals. The desorbed phenanthrene conductive to Fenton oxidation was transported toward cathode by electroosmotic flow. However, in Youngdong illitic clay, oxidation of phenanthrene near anode readily occurred compared to Hadong clay due to high iron content and low acid buffering capacity.

• Coupled systems mechanics
• /
• v.11 no.5
• /
• pp.373-387
• /
• 2022

In this paper,soil-structure interaction effects on the seismic response of multistory frame structure on raft foundation are numerically analyzed. The foundation soil profile is assumed to consists of a clay layer of variable thicknessresting on bedrock. Amodified plane-strain numerical model isformed in the software Plaxis, and both free vibration analysis, and earthquake analysis for a selected ground motion accelerogram are performed. The behavior of the structure is assumed to be linear elastic with Rayleigh viscous damping included. The behavior of the clay layer is modeled with a Hardening soil model with small strain stiffness. The computed results in terms of fundamental period and structural horizontal displacementsfor the case of fixed base and for different thicknesses of clay layer are presented, compared, and discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.153-159
• /
• 2000

This study was carried out to develop a more convenient way to analyze soil texture by hydrometer. Standard Hydrometer Method(SM), in which at least 7 times of reading is required for soil texture analysis, was compared with two other methods named as Soil Clay Fraction Procedure(SCFP) and Simplified for Soil Texture Analysis(SSTA), in which 2 or 3 times of hydrometer reading may be enough for soil texture analysis, respectively. There appeared to be very close correlation(nearly 1.0) between clay contents measured by the above three methods. The clay content measured by SCFP were overestimated by 0~2 percent than those by SM. Textural classes of 28 soil samples determined by SSTA were identical to those by SM. But, textural classes determined by SCFP appeared to be different from those by SM in 4 of 28 soil samples. Because the measurements of particle size in SSTA is made near $2{\mu}m$ diameter, we can save time and labour to measure the clay contents. Therefore, SSTA could be used as a more convenient method to get the same data as SM.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.705-711
• /
• 2016

Crimson clover, a legume crop, is a landscape crop and green manure crop that can be sowing in spring and autumn. Its red flower blooms in May, and serves various roles such as landscape composition, weeds suppressing, prevention of soil loss and nutrient on sloping land and supplying nitrogen and organic matter in soil. Thus, in order to utilize this crop in agriculture land, we evaluated the growth characteristics of crimson clover cultivated in four different soil textures; sand, sandy loam, loam, and clay loam. The nitrogen content of crimson clover was $15.8g\;kg^{-1}$ and C/N ratio was 20.3. Its plant height was 42.5 cm in sandy loam and 49.5 cm in loamy, respectively, approximately 20 cm longer than the sand and clay loam. The crimson clover in sandy loam and loam bloomed about seven days earlier than those in sand and clay loam. Regarding number of flower per hill and flower length, there were no difference among the soil textures. Dry weight of crimson clover for sandy loam and loam was $2.5Mg\;ha^{-1}$ and $2.3Mg\;ha^{-1}$, respectively, $0.8{\sim}1.1Mg\;ha^{-1}$ higher than that of sand and sandy loam. Plant height and dry weight of crimson clover increased with delaying harvest time. Nitrogen contribution in loam and clay loam was $51.3kg\;ha^{-1}$ and $53.5kg\;ha^{-1}$, respectively. Therefore, in terms of flowering properties and dry weight, the proper soil texture for the growth and development of crimson clover was sandy loam and loam.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.242-248
• /
• 2014

We have five soil series of pan soils in South Korea out of 391 series: Gangreung, Bugog, Yeongog, Jangweon, and Pogog. Productivity decreases in pan soils as pan horizons impede percolation and capillary rise of water and interrupt root extension. This study was performed to investigate pedogenic processes of pan soils mainly located in footslope and river terrace by analyzing physicochemical properties and soil micro-morphology. Korean pan soils belong to Alfisols, Ultisols, or Inceptisols and have udic or aquic soil moisture regime, mesic temperature regime, and mixed mineral substances. Texture of pan horizons selected for the present study was mainly silty clay loam with clay contents ranging from 26.3 to 45.3%. Bulk density of the pan horizons ranged from 1.4 to $2.1Mg\;m^{-3}$ and their soil structure were subangular or angular structure. In terms of micro-morphological structure, Bt horizon of Gangreung series was formed as platy and striated b-fabric structure possibly affected by uplift of coastal terrace following clay sedimentation by flood. Jangweon series showed micro-morphology of massive structure and crystallic b-fabric as macropores between coarse debris established by debris fall in slope were filled with silt-sized particles. The Bt horizons having massive structure and striated b-fabric in Yeongog, Pogog, and Bugog series implies that those horizons experienced horizontal mass flow after clay accumulation.