• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1594-1600
• /
• 2010

A study was conducted to determine the dietary effects of a clay mineral (sodium bentonite, NaB) on manure gas emission, health, production, and meat characteristics of Hanwoo steers. Two diets fed to steers included a control diet (concentrate mix and rice straw) and a treatment diet (control diet+1.0% clay mineral/concentrate mix). Dietary NaB addition considerably reduced concentrations of gases ($H_2S$, $SO_2$ and $NH_3$) in the manure of Hanwoo steers. Growing steers fed NaB had similar blood profiles with the exception of lower (p<0.05) concentrations of blood alkaline phosphatase and lactate dehydrogenase. Dietary NaB addition tended to increase (p = 0.10) live weight by 30 kg at slaughtering and did not affect carcass yield and quality traits. Dietary NaB addition increased concentrations of P (p<0.01), Mg (p<0.01), Na (p<0.01), Zn (p<0.005), K (p = 0.08), Fe (p = 0.08) and Cu (p = 0.07) in the longissimus muscle compared to the control but did not affect (p>0.05) fatty acid composition. The study demonstrated that the dietary addition of a clay mineral could be effective in improving mineral bioavailability to Hanwoo steers, which could be one of the reasons for their improved performance.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.215-225
• /
• 2005

Numerous clay veins along fractures such as fault, joints, cracks and small fissures are found in granitic rocks in the Korean Peninsula. Granitic rocks of three geological stages (Jurassic, Cretaceous and Paleogene) occur in the Korean Peninsula, and are known as the Daebo, Bulguksa and Hoam granites, respectively. Specimens from clay veins composed or mainly mica clay mineral (illite) were dated using the K-Ar method with the hosted granitoids. The respective ages were as follows. Jurassic: granites 143.7 Ma and 160 Ma, clay mineral veins 104 Ma and 107 Ma: Cretaceous: granite 133.2 Ma, clay mineral veins 93.6 Ma, 84.2 Ma and 84.3 Ma: Paleogene: granite 39.7 Ma and 35.4Ma, clay mineral veins 27.1 Ma and 23.9 Ma. The ages of the clay veins in the Korean Peninsula are clearly much younger than those of their hosted granitoids. This contrasts with data for similar clay veins in Cretaceous and Paleogene granitoids in southwest Japan, where the K-Ar ages of mica clay minerals are slightly younger than their host rocks, or are almost the same.

• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.138-144
• /
• 1997

The tidal deposits in the Haenam Bay, southwest coast of Korea, are stratigraphically divided at least into two units (Unit I of Holocene and Unit II of late Pleistocene) based on the obtained vibracoring sediments. In Unit I, clay minerals of illite, chlorite, kaolinite and smectite are observed as similar to those of the other modern tidal deposits. Of note, however, is the absence of smectite and chlorite in the upper part of Unit II compared with the clay mineral compositions of Unit I. It is concluded that the subaerial weathering and diagenetic effects rather than depositional processes are responsible for the positive and characteristic differences in clay mineral compositions between two units, that is, the upper part of Unit II was exposed subaerially and weathered diagenetically prior to the late Holocene transgression. Therefore, the bounding relationship between Unit I and Unit II is unconformable.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.447-454
• /
• 1996

Clay mineral geothermometry using sericites and chlorites in Bobae sericite mine reveals that these clay minerals formed at relatively high temperature. It appears that sericites formed at around $200{\sim}350^{\circ}C$ and chlorites formed at around $250^{\circ}C$. X-ray diffraction study of these minerals reveals that sericite 2M, type and chlorite lib type are dominant phases. Both polytypes indicate that the precipitation temperatures of these minerals shows fairly good agreement with the estimated temperature by clay mineral geothermometry. The Bobae sericite mine was formed at relatively higher temperature than several non-metal ore deposits occurred in the southern part of Korea.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.113-125
• /
• 1999

In this study the occurrence and mineralogical characteristics of clay minerals from the Munhyun-dong landslide area in Pusan city were examined by XRD, SEM, and chemical analyses. Several types of clay minerals such as halloysite, vermiculite, mica/vermiculite interstratified mineral, vermiculite/smectite interstratified mineral, kaolinite and illite are found abundantly in the area. The occurrence of clay minerals suggest that they have been formed by weathering of andesite which is the bedrock of the area. It is believed that halloysite was formed in the early stage of weathering, and vermiculite, mica/vermiculite interstratified mineral and mica/vermiculite interstratified mineral were formed in the middle stage, and finally, kaolinite was formed. The clay minerals occurring in the central part of the landsliding area and within the slip surface are dominated by expandable minerals such as halloysite, vermiculite and vermiculite/smectite interstratified mineral. These clay minerals expand by absorbing water and effectively decrease the shear resistance of the rock mass, and therefore, they could be an important factor for the landslide. The analyses of geology and mineralogical characteristics of the area suggest that the landslide was caused by combination of various factors including steep slope, heavy rainfall, abundant joints, alteration of the rocks, and occurrence of expandable clay minerals. The result of this study suggests that the investigation for the prevention of possible landslide must include the examination of clay mineralogy as well as the site geology.

• Geophysics and Geophysical Exploration
• /
• v.8 no.3
• /
• pp.218-223
• /
• 2005

This study considers to electrical resistivity characteristics for clay minerals types and contents in fractured and fault zone. The electrical resistivity is measured for an artificial agar specimen with clay minerals instead of a natural rock. The artificial agar specimen with clay minerals was special worked in study. The clay minerals used are Kaolinite and Montmorillonite in test, the clay mineral contents increases until $0\~40\%$ to the same specimen. As results, the electrical resistivity of the specimen decreased gradually as the clay mineral contents increases for all types of clay minerals. Montmorillonite shows remarkably lower resistivity than Kaolinite, although its clay content is fewer than that of Kaolinite. Also, a proposed experimental expression shows a good correlation coefficient as high as 0.89 or more in all clay minerals.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.211-220
• /
• 2012

The numerical modeling and simulation have been used increasingly as tools for examining and interpreting the bulk structure and properties of materials. The use of molecular dynamics (MD) simulations to model the structure of materials is now both widespread and reasonably well understood. In this research, we introduced the numerical method to calculate the physico-chemical properties such as a diffusion coefficient and a viscosity of clay mineral. In this research, a series of MD calculations were performed for clay mineral and clay-water systems, appropriate to a saturated deep geological setting. Then, by using homogenization analysis (HA), the diffusion coefficients are calculated for conditions of the spatial distribution of the water viscosity associated with some configuration of clay minerals. This result of numerical analysis is quite similar to the previous experimental results. It means that the introduced numerical method is very useful to calculate the physico-chemical properties of clay minerals under various environmental conditions.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2010

The absolute clay mineral compositions and regional distribution of the 131 bulk marine surface sediments around the Jeju Island was compared to their relative compositions and distribution using quantitative X-ray diffraction analysis. Average absolute clay mineral composition is illite 15.3% (0.5~40.5%), chlorite 2.6% (0~7.9%), and kaolinite 1% (0~5.6%). Total contents of the clay minerals are very high in the South Sea of Korea, northwestern part and southern offshore of Jeju Island. The average relative composition is illite 70.9% (16.7~89%), chlorite 21.5% (8.4~68.5%), and kaolinite 7.6% (0~29.3%). Relative illite contents are high in the northwestern and southeastern part of study area, and southern part of Jeju Island. Chlorite contents are high in the eastern part of study area and western part of Jeju Island. Kaolinite contents are high in the western and southern part of Jeju Island, and southern offshore of Jeju Isand. Absolute Distribution patterns are very similar to those of fine-grained (from clay to silt) sediment, whereas relative distribution patterns do not show any relationship with those of fine-grained sediment.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.65-70
• /
• 2005

A low resistivity zone is found in many places such as a fractured fault zone, weathered zone and aquifer. The electrical resistivity is influenced mainly by pore fluid as well as the clay mineral types and contents, Hence, it is very important to understand the relationship between the electrical resistivity and clay contents associated with the low resistivity zone for geotechnical applications such as civil engineering. This study examines the characteristics of clay mineral types and contents to electrical resistivity through sample measurements, and proposes an expression relating the resistivity and clay content. The electrical resistivity is measured for an artificial agar specimen with clay minerals instead of a natural rock. The clay minerals used are Kaolinite and Montmorillonite. Montmorillonite shows remarkably lower resistivity than Kaolinite, although its clay content is fewer than that of Kaolinite. Also, the proposed expression shows a good correlation coefficient as high as 0.89 or more in all clay minerals.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.483-490
• /
• 2004

Nakdong River Plain and its adjoining sea arc unusually covered by very thick soft clay sediments which were caned Pusan clays, sometimes reaching 40-70m. Since early 1990s a large number of geotechnical investigations have been carried out for land reclamation works in the area, including Busan city and its neighboring cities. Nevertheless, geotechnical engineers have paid little attention to studying geological characteristics on the clays, except some researches related to mineralogy, geo-chemistry, benthic foraminiferal fauna etc. The purpose of reserach is the knowledge of the correlation between engineering properties and mineralogy of clay sediments. The correlation analysis carry out multiple regression that have independent variables (Engineering properties) and dependent variables (mineralogy, geochemistry). Engineering properties of clay are correlated with the mineral compositions and geochemical characteristics. The result of the analysis is Wn = -0,6Feldspar + 1.1pH + 0.01TDS + 27.5, Ip = 0.36Clay + 1.44Vermiculite + 0.94clay mineral - 22.118, PI. = 0.005TDS - 0.31Feldspar + 22.43, eo = 0.02Vermiculite - 0.01Quartz + TDS + 0.93, ${\nu}$t = 0.009Quartz - 0.06Conductivity + 1.67, E50 = 1.94Vermicuhte - 0.96Kaohnite -0.53silt + 49.64, SR = -0.25Kaolinite + 1.5pH -2.3Conductivity, Cc = 0.03pH + TDS -0.2, LL = 0.5Clay + 1.3Vermiculite + 5.5Conductivity + 0.8Caly mineral -20.48