• 제목/요약/키워드: clay bonded sand

검색결과 3건 처리시간 0.017초

Fundamental Properties of Mortar and Concrete Using Waste foundry Sand

  • Moon Han-Young;Choi Yun-Wang;Song Yong-Kyu;Jeon Jung-Kyu
    • 콘크리트학회논문집
    • /
    • 제17권1호
    • /
    • pp.141-147
    • /
    • 2005
  • The development of automobile, vessel, rail road, and machine industry leads an increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 700,000 tons a year, but most WFS has been buried itself and only $5{\~}6\%$ WFS is recycled as construction materials. Therefore, it is necessary for most WFS to research other ways which can be used in a higher value added product. The study on recycling it as a fine aggregate for concrete or green sand has been in progress in America and Japan since 1970s and 1980s respaectively. In this study, two types of WFS were used as a fine aggregate for concrete. Nine types of concrete aimed at the specified strength of 30 MPa were mixed with washed seashore coarse sand in which salt was removed, and WFS and then appropriate mixture proportion of concrete was determined. Moreover, basic properties such as air contents, setting time, bleeding, workability and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

영구 지반앵커에 대한 부식의 영향 평가 (Evaluation of Corrosion Effects on Permanent Ground Anchors)

  • Park, Hee-Mun;Park, Seong-Wan
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.27-36
    • /
    • 2004
  • 극성저항 계측법과 전기화학 임피던스 분광학을 이용하여 영구적 지반 앵커의 부식율을 계측하는 절차를 제시하였다. 극성저항 계측법을 이용하여 대표지반의 종류와 철의 부식률에 관한 특성관계를 도출하였고, 전기화학 임피던스 분광학을 이용하여 시간의존 부식 반응과 다양한 종류의 코우팅 시스템의 평가, 그리고 시멘트 그라우팅이 부식에 미치는 영향에 대하여 각각 평가하였다. 실험 결과 점성토와 사질토의 pH 지수가 5이하인 경우 부식발생이 용이한 지반으로서 영구적 지반 앵커의 부식반응에 심각한 영향을 미치리라 판단된다. 또한 중성 또는 알카리성의 지반은 부식진행이 관찰되지 않았으며 부식률은 pH지수에 관계없이 일정한 결과를 보였다. 포설린 점성토의 경우 pH지수의 변화가 철의 부식에 매우 낮은 영향을 미쳤다. 한편 시멘트 그라우팅의 사용은 철의 부식율을 약 0.003-0.0lmm/y 정도로 낮출 수 있었으며 에폭시 혼합 코우팅의 경우도 부식의 영향을 받지않고 원 상태를 유지할 수 있어 매우 효과적으로 부식효과를 감소시킬 수 있었다.