• 자원환경지질
• /
• 제32권2호
• /
• pp.151-159
• /
• 1999

This research was carried out to evaluate the possible usage of natural clay materials collected from the Kimpo landfill site and nearby clay mines as a clay liner material. In order to evaluate the possible usage as a clay liner material, specific gravity, pH, loss-on-ignition, organic carbon content and mineralogical composition of clay materials were measured. The Atterberg limit test and the size analysis were performed for the engineering classification and the prediction of hydraulic conductivity of clay materials. Caution exchange capacity and batch tests were also carried out for the assessment of attenuation capacity. Clay specimens of KPNCL, KP-1, KP-2 and SH were recommended as suitable clay linder materials from viewpoint of their basic quality and attenuation capacity.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.997-1004
• /
• 2009

A standard approach is to classify all of future observations. In some cases, however, it would be desirable to defer a decision in particular for observations which are hard to classify. That is, it would be better to take more advanced tests rather than to make a decision right away. This motivates a classifier with a reject option that reports a warning for those observations that are hard to classify. In this paper, we present the method which gives efficient computation with a reject option. Some numerical results show strong potential of the propose method.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.112-116
• /
• 2008

The combustion properties of sandwich panels were tested according to ISO 13784-1(Room Corner Test for Sandwich panel building systems) method to supplement ISO 9705 Room corner test, and analyzed comparatively. Several variables including heat release rate, smoke production rate, FIGRA, SMOGRA, thermal configuration, visual check lists and so on, were analyzed for four materials on sandwich panel systems. Finally, Fire performances of test results on each material by ISO 13784-1 are categorized by applying to the classification system of both EN 13501-1 and Eurefic research program

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.61-68
• /
• 2008

It is essential to analyze and classify the physical characteristics of weathered granite for engineering purposes. This paper is to suggest a physical method to determine the degree of weathering of weathered soils. A new classification method for determining the degree of weathering is suggested, based upon the results from laboratory tests including fall cone test. According to the proposed physical method using fall cone apparatus, the measured values of the samples from the same area show distinctive difference of weathering. The water content tends to increase with increasing the degree of weathering at the same penetration in fall cone test. And relationship between CWI and water content are expressed one equation in Hwaseong area and Ilsan area.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.153-156
• /
• 2007

In this paper, we propose a fast face detection approach using PCA and SVM. In our detection system, first we filter the face potential area using statistical feature which is generated by analyzing local histogram distribution. And then, we use SVM classifier to detect whether there are faces present in the test image. Support Vector Machine (SVM) has great performance in classification task. PCA is used for dimension reduction of sample data. After PCA transform, the feature vectors, which are used for training SVM classifier, are generated. Our tests in this paper are based on CMU face database.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.65-71
• /
• 2011

Seakeeping analysis has progressed from the linear frequency-domain 2D strip method to the nonlinear timedomain 3D panel method. Nevertheless, the violent free surface flows such as slamming and green water on deck are beyond the scope of traditional panel methods based on potential theory. Recently, Computational Fluid Dynamics (CFD) has become an attractive numerical tool that can effectively deal with the violent free surface flows. ABS, as a classification society, is putting forth a significant amount of effort to implement the CFD technology to the advanced strength assessment of modern commercial ships and high-speed naval craft. The main objective of this study is to validate the CFD technology as a seakeeping tool for ship design considering fully nonlinear three-dimensional slamming and green water on deck. The structural loads on a large container carrier were successfully calculated from the CFD analysis and validated with segmented model test measurements.

• Journal of the Korean Data and Information Science Society
• /
• 제21권2호
• /
• pp.371-377
• /
• 2010

In this study, we propose two informal hypothesis tests which may be useful in determining the number of trees in a random forest for use in classification. The first test declares that a case is 'easy' if the hypothesis of the equality of probabilities of two most popular classes is rejected. The second test declares that a case is 'hard' if the hypothesis that the relative difference or the margin of victory between the probabilities of two most popular classes is greater than or equal to some small number, say 0.05, is rejected. We propose to continue generating trees until all (or all but a small fraction) of the training cases are declared easy or hard. The advantage of combining the second test along with the first test is that the number of trees required to stop becomes much smaller than the first test only, where all (or all but a small fraction) of the training cases should be declared easy.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2001년도 Proceedings of the 3rd Annual Meeting of Yellow Sea Environment
• /
• pp.64-69
• /
• 2001

The present work provides a result from the preliminary experiment for hydrocyclone technology. In this work, local lake sediments and waste coal fly ash were used as test samples, prior to the application of hydrocyclone technology to the waste sludge thickening. A few cyclones based on the Rietema standard geometry were prepared. Chemical analysis of the sediments showed that more organic contaminants were in smaller particles. The experimental tests further showed that physical characteristics of particles, configuration of the cyclone and operation condition would affect the separation efficiency. The current results showed that small size cyclones might improve the separation and concentration of the lake sediments, and higher inlet velocity would increase the concentration rate of under flow and absolute concentration of sediment particles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.974-979
• /
• 2008

The purpose of this study was to evaluate the effect of vegetation on the cutting slope applied by vegetation system in the whole land. The engineering characteristics of slopes were investigated using the face mapping and physical tests. From the statistical methods, a relationship between a geologic stratum and degree of covering was independent. Therefore, the afforestation of slope was affected more by condition of vegetation as direction and opening of joints, and a topsoil state than by conventional classification of layer. It was concluded that the adjustable vegetation on the slope considering condition of geometric shape of slope, joint data and spontaneous type could make useful early afforestation.