• Structural Engineering and Mechanics
• /
• 제66권3호
• /
• pp.295-303
• /
• 2018

The semi-analytical method to study the nonlinear dynamic behavior of simply supported spiral stiffened functionally graded (FG) cylindrical shells subjected to an axial compression is presented. The FG shell is surrounded by damping and linear/nonlinear elastic foundation. The proposed linear model is based on the two-parameter elastic foundation (Winkler and Pasternak). A three-parameter elastic foundation with hardening/softening cubic nonlinearity is used for nonlinear model. The material properties of the shell and stiffeners are assumed to be FG. Based on the classical plate theory of shells and von $K{\acute{a}}rm{\acute{a}}n$ nonlinear equations, smeared stiffeners technique and Galerkin method, this paper solves the nonlinear vibration problem. The fourth order Runge-Kutta method is used to find the nonlinear dynamic responses. Results are given to consider effects of spiral stiffeners with various angles, elastic foundation and damping coefficients on the nonlinear dynamic response of spiral stiffened simply supported FG cylindrical shells.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.371-388
• /
• 2022

The present study tackles the problem of forced vibration of imperfect axially functionally graded shell structure with truncated conical geometry. The linear and nonlinear large-deflection of the structure are considered in the mathematical formulation using von-Kármán models. Modified coupled stress method and principle of minimum virtual work are employed in the modeling to obtain the final governing equations. In addition, formulations of classical elasticity theory are also presented. Different functions, including the linear, convex, and exponential cross-section shapes, are considered in the grading material modeling along the thickness direction. The grading properties of the material are a direct result of the porosity change in the thickness direction. Vibration responses of the structure are calculated using the semi-analytical method of a couple of homotopy perturbation methods (HPM) and the generalized differential quadrature method (GDQM). Contradicting effects of small-scale, porosity, and volume fraction parameters on the nonlinear amplitude, frequency ratio, dynamic deflection, resonance frequency, and natural frequency are observed for shell structure under various boundary conditions.

• Structural Engineering and Mechanics
• /
• 제85권6호
• /
• pp.729-742
• /
• 2023

It is a recent attraction to the mechanical scientists to investigate state of wave propagation, buckling and vibration in the sport balls to observe the importance of different parameters on the performance of the players and the quality of game. Therefore, in the present study, we aim to investigate the wave propagation in handball game ball in term of mass of the ball and geometrical parameters wit incorporation of the viscoelastic effects of the ball material into account. In this regard, the ball is modeled using thick shell structure and classical elasticity models is utilized to obtain the equation of motion via Hamilton's principle. The displacement field of the ball model is obtained using first order shear deformation theory. The resultant equations are solved with the aid of generalized differential quadrature method. The results show that mass of the ball and viscoelastic coefficient have considerable influence on the state of wave propagation in the ball shell structure.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.375-387
• /
• 2014

The purpose of this paper is to propose a method for evaluation of varying stiffness coefficients of tailored conical shells (TCS). Furthermore, a comparison between buckling loads of these shells under axial load with the different fiber path is performed. A circular truncated conical shell subjected to axial compression is taken into account. Three different theoretical path containing geodesic path, constant curvature path and constant angle path has been considered to describe the angle variation along the cone length, along cone generator of a conical shell are offered. In the TCS with the arbitrary fiber path, the thickness and the ply orientation are assumed to be functions of the shell coordinates and influencing stiffness coefficients of the structure. The stiffness coefficients and the buckling loads of shells are calculated basing on classical shells theory (CST) and using finite-element analysis (FEA) software. The obtained results for TCS with arbitrary fiber path, thickness and ply orientation are derived as functions of shell longitudinal coordinate and influencing stiffness coefficients of structures. Furthermore, the buckling loads based on fiber path and ply orientation at the start of tailored fiber get to be different. The extent of difference for tailored fiber with start angle lower than 20 degrees is not significant. The results in this paper show that using tailored fiber placement could be applied for producing conical shells in order to have greater buckling strengths and lower weight. This work demonstrates the use of fiber path definitions for calculated stiffness coefficients and buckling loads of conical shells.

• Structural Engineering and Mechanics
• /
• 제60권4호
• /
• pp.615-631
• /
• 2016

In this paper, an analytical method for the Post-buckling response of cylindrical shells with spiral stiffeners surrounded by an elastic medium subjected to external pressure is presented. The proposed model is based on two parameters elastic foundation Winkler and Pasternak. The material properties of the shell and stiffeners are assumed to be continuously graded in the thickness direction. According to the Von Karman nonlinear equations and the classical plate theory of shells, strain-displacement relations are obtained. The smeared stiffeners technique and Galerkin method is used to solve the nonlinear problem. To valid the formulations, comparisons are made with the available solutions for nonlinear static buckling of stiffened homogeneous and un-stiffened FGM cylindrical shells. The obtained results show the elastic foundation Winkler on the response of buckling is more effective than the elastic foundation Pasternak. Also the ceramic shells buckling strength higher than the metal shells and minimum critical buckling load is occurred, when both of the stiffeners have angle of thirty degrees.

• Wind and Structures
• /
• 제30권2호
• /
• pp.133-140
• /
• 2020

In this paper, critical fluid velocity and frequency of laminated pipe conveying fluid are presented. Each layer of the pipe is reinforced by functionally graded carbon nanotubes (FG-CNTs). The internal fluid is assumed turbulent and the induced forces are calculated by momentum equations. The pipe is resting on viscoelastic foundation with spring, shear and damping constants. The motion equations are derived based on classical shell theory and energy method. Differential quadrature method (DQM) is used for solution and obtaining the critical fluid velocity. The effects of volume percent and distribution of CNT, boundary condition, lamina layer number, length to radius ration of pipe, viscoelastic medium and fluid velocity are shown on the critical fluid velocity. Results show that with increasing the lamina layer number, the critical fluid velocity increases.

• Earthquakes and Structures
• /
• 제15권4호
• /
• pp.361-367
• /
• 2018

In this paper, dynamic analysis of concrete pipe submerged in the fluid and conveying fluid is studied subjected to earthquake load. The structure is modeled by classical shell theory and the force induced by internal fluid is obtained by Navier-Stokes equation. Applying energy method and Hamilton's principle, the motion equations are derived. Based on Navier and Newmark methods, the dynamic deflection of the structure is calculated. The effects of different parameters such as mode number, thickness to radius ratios, length to radius ratios, internal and external fluid are discussed on the seismic response of the structure. The results show that considering internal and external fluid, the dynamic deflection increases.

• Earthquakes and Structures
• /
• 제24권2호
• /
• pp.127-140
• /
• 2023

The vibration of microtubule in human cells is the source of electrical field around it and inside cell structure. The induction of electrical field is a direct result of the existence of dipoles on the surface of the microtubules. Measuring the electrical fields could be performed using nano-scale sensors and the data could be transformed to other computers using internet of things (IoT) technology. Processing these data is feasible by artificial intelligence-based methods. However, the first step in analyzing the vibrational behavior is to study the mechanics of microtubules. In this regard, the vibrational behavior of the microtubules is investigated in the present study. A shell model is utilized to represent the microtubules' structure. The displacement field is assumed to obey first order shear deformation theory and classical theory of elasticity for anisotropic homogenous materials is utilized. The governing equations obtained by Hamilton's principle are further solved using analytical method engaging Navier's solution procedure. The results of the analytical solution are used to train, validate and test of the deep neural network. The results of the present study are validated by comparing to other results in the literature. The results indicate that several geometrical and material factors affect the vibrational behavior of microtubules.

• 대한한방소아과학회지
• /
• 제13권1호
• /
• pp.63-138
• /
• 1999

From all possible chinese medical literatures, I studied the history of chinese pediatrics by dividing into Chunqiu Zhanguo, QinHan dynasties, LiangJin, SuiTang five dynasties, Song Dynasty, Jin and Yuan dynasties, Ming Qing dynasties. The conclusions are summarized as followings 1. The mentions related with pediatrics existed already in Yan ruins turtle shell letters, and 〈Yellow Emperor's classic of internal medicine> in Chunqiu Zhanguo time formed the system of medicine, established the theoretical foundation. 2. Chang Ji established the system of diagnosis and treatment based on overall analysis of symptoms and signs in , and later pediatricians commonly applied his prescriptions to the febrile diseases. 3. The period from LiangJin to SuiTang, Pediatrics was established as special department then in , Chao Yuanfang stated the etiology, pathogenesis, symptomatology of pediatric diseases. 4. In Song dynasty. pediatric 4 major, symptoms that had been mentioned from SuiTang dynasties, were clearly established, pediatrical special books were published, and written by Qian Yi who is considered as the founder of chinese pediatrics, established the foundation of pediatrical division formation in distinction from adult fields. 5. In Jin and Yuan dynasties, four eminent physicians established the actual relationship between the theories and practical applications and insisted various and creative theories based on the classical medicine, for example, the theory that fire and heat in the body was the main cause of diseases of Liu Wansu purgation theory of Zhang Congzheng, qi regulating theory of Liu Gao, ministerial fire theory and the theory that yang is ever in excess while Yin is ever deficient of Zhu Zhenheng, etc, and they applied those theories to pediatrical various sides. 6, In Ming Qing dynasties, pediatrical specialists and pediatrical publications had increased, eg, father and son Xue Kai Xue Ji, Wan Quan, Lu Bai-si, etc in Ming dynasty, Ye Gui, Chen Fuzheng, Xia Ding, etc in Qing dynasty were famous as pediatricians. Specially, the doctrine of epidemic febrile diseases at that time showed prominent effects to children's epidemic febrile diseases.

• 한국전산구조공학회논문집
• /
• 제20권6호
• /
• pp.719-730
• /
• 2007

Timoshenko의 전통적인 보 이론에 근거한 유한 요소의 전단 잠김 현상을 해결하기 위하여 가정 변형도법을 적용한 7자유도 공간 박벽 뼈대요소를 개발하였다. 2개의 노드를 갖는 직선 보요소에서 한 요소내의 변형도가 일정하다고 가정하여 형상함수를 유도하고 이를 바탕으로 가상일의 원리에 따라 강성행렬을 구성하였다. Corotational 기하 비선형 해석법을 이용하여 불평형 하중을 산정하였으며 부재 길이의 비선형 효과를 반영하기 위하여 bowing effect를 정밀하게 고려하였다. 일축 비대칭 단면을 갖는 곡선 외팔보와 이축 비대칭 단면을 갖는 직선 외팔보에 대하여 횡-비틀림 좌굴에 의한 안정 해석과 후좌굴 해석을 수행한 결과 ABAQUS 쉘요소와 좋은 일치를 보여 주었다.