• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• The Journal of the Korean dental association
• /
• v.37 no.5 s.360
• /
• pp.365-375
• /
• 1999

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2015

Objectives: The purpose of the study is to investigate the psychological state of the patients according to skeletal class III malocclusion symptoms. Methods: The subjects were 200 skeletal class III malocclusion patients. The questionnaire consisted of general characteristics, clinical manifestation, and T score of Korean version of self-rated Symptom Checklist-90-Revision modified by Jae-hwan Kim. The data were analyzed using SAS version 9.2 and t-test, ANOVA, and ANCOVA were used. Clinical manifestation included subjective recognition and radiological analysis. The subjective recognition of the patients consisted of self-satisfaction of the appearance, phonation, mastication, and temporomandibular joint pain. T score consisted of somatization, obsessive-compulsive, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation, and psychoticism. Results: The most serious factor in 9 scales was the severe TMJ pain by ANCOVA. Male patients had a higher T score in phobic anxiety, psyochoticism, somatization and depression than female patients. Those having low appearance satisfaction had the problem in interpersonal sensitivity. Obsessive-compulsive symptoms were conspicuous in phonation difficulty and temporomandibular pain. Conclusions: The patients with skeletal class III malocclusion have more satisfaction with appearance, pronunciation, and phonation than those with skeletal class III malocclusion and overjet. Proper dental treatment will improve the communication and quality of life.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.317-325
• /
• 1999

In proper diagnosis of skeletal Class III malocclusion, it was important to know the pattern of three dimensional skeletal & facial disharmony. The purpose of this study was to obtain P-A cephalometric characteristics in skeletal Class III malocclusion comparing with normal occlusion. The samples were consisted of 120 subjects, divided into four groups : Male normal occlusion, Female normal occlusion, Male skeletal Class III malocclusion, Female skeletal Class III malocclusion. Posteroanterior and lateral cephalogram were taken from the subjects with a x-ray apparatus (ASHAI CX90SP, Japan) and traced on acetate paper with routine manner. The transverse and vertical values from posteroanterior cephalometry, the sagittal values from lateral cephalometry and their ratio were obtained. The results were as follows: 1. The anteroposterior discrepancy in skeletal Class III group was not due to short maxillary length(Cd-A), but to longer mandibular length(Cd-Gn) than normal occlusion group. 2. The faces of skeletal Class III group were longer than normal occlusion group. It was not due to increase of upper face height(Cg-ANS) but to increase of the lower face height(ANS-Me) especially mandibular height(Cd-Me). 3. There was no difference in the facial width values between normal occlusion group and skeletal Class III group, except upper molar width(U6-U6), lower molar width(L6-L6) and mandibular width(Ag-Ag) of female skeletal Class III group which were larger than normal occlusion group. 4. The increase of mandibular length of skeletal Class III group was reflected in the increase of lower facial height but did not have an effect on the mandibular width.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.15-22
• /
• 2013

Objective: The purpose of this study was to investigate the relationship between the mandibular dental and basal arch forms in subjects with normal occlusion and compare them with those of Class III malocclusion using cone-beam computed tomography (CBCT). Methods: CBCT images of 32 normal occlusion (19 males, 13 females; 24.3 years) and 33 Class III malocclusion subjects (20 males, 13 females, 22.2 years) were selected. Facial axis and root center points were identified from the left to right mandibular first molars. Distances between the facial axis and root center points for each tooth were calculated, and 4 linear and 2 ratio variables were measured and calculated for each arch form. The variables were compared between groups by independent t-test. Pearson correlation coefficient was applied to assess the relationships between dental and basal variables within each group. Results: The mandibular dental and basal intercanine widths were significantly greater in the Class III group than in normal occlusion subjects (p < 0.05). The dental and basal intercanine widths as well as the dental and basal intermolar widths were strongly correlated in normal occlusion and moderately correlated in Class III malocclusion. Conclusions: The dental arch form demon strated a strong positive correlation with the basal arch form in the normal occlusion group and moderate correlation in the Class III malocclusion group. These results might be helpful for clinicians to have a better understanding of the importance of basal arch form in the alveolar bone.

• The korean journal of orthodontics
• /
• v.47 no.3
• /
• pp.167-175
• /
• 2017

Objective: To evaluate the differences in maxillomandibular transverse measurements at either the crown or the estimated center of resistance (CR), and to compare values between normal occlusion and Class III malocclusion groups. Methods: Dental casts and computed tomography (CT) data from 30 individuals with normal occlusion and 30 with skeletal Class III malocclusions were evaluated. Using the casts, dental arch widths (DAWs) were measured from the cusp tips, and basal arch widths (BAWs-cast) were measured as the distance between the points at the mucogingival junction adjacent to the respective cusp tips. The BAWs determined from CT (BAWs-CT) images were measured from the estimated CRs of the teeth. Results: None of the DAW measurements or maxillomandibular DAW differences showed statistically significant intergroup differences. In contrast, the maxillary BAWs-CT and BAWs-cast were lesser in the Class III malocclusion group than in the normal occlusion group. The mandibular BAWs-CT were significantly greater in the Class III malocclusion group than in the normal occlusion group. Moreover, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. Conclusions: The maxillomandibular DAW differences showed no significant intergroup differences. In contrast, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. The maxillomandibular BAW differences at the estimated CRs, measured using CT or casts, can reveal underlying transverse maxillary basal arch deficiencies in patients with skeletal Class III malocclusions.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.633-644
• /
• 1993

There has been so much controversies about the position of upper and lower jaws, and their first permanent molars in normal occlusion and Angle's class $I{\cdot}II{\cdot}III$ malocclusions. So, the purpose of this study is to compare the position of upper and lower jaws, and their first molars in normal occlusion and Angle's class $I{\cdot}II{\cdot}III$ malocclusions by lateral cephalometric analysis. The sample consisted of one hundred and twenty girls(thirty in each group) who had completed growth. The findings of this study were as follows : 1. In class I malocclusion, both maxilla and mandible were slightly posterior position than normal occlusion, but they showed harmonious relationship. 2. In class II malocclusion, the mandible was greatly retruded, and the maxilla was also slightly retruded to the cranial base as compared with normal occlusion. 3. In class III malocclusion, the maxilla was significantly retruded to the cranial base, but no significant difference was found in mandibular position as compared with normal occlusion. 4. The maxillary first molar was located at posterior position in class II malocclusion, and anterior position in class III malocclusion to the cranium, so that the rotation of mandible was influenced by that. 5. The mandibular first molar showed constant relationship to the mandible in all four groups, but different position to the cranial base in direct proportion to the mandibular position. 6. On the treatment planning of class III malocclusion, it seems to be better to promote the mandibular horizontal growth by inhibiting the vertical growth of maxillary molar area, and on the treatment planning of class III malocclusion, it seems to be better to promote the antero-inferior growth of maxilla mi to promote the mandibular vertical growth by inducing the vertical growth of maxillary molar area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.152-161
• /
• 2007

This study was conducted to patients visited oral maxillo-facial surgery, KNUH and the purpose of the study was to assess skeletal and dento-alveolar stability after surgical-orthodontic correction treated by skeletal Class III malocclusion patients with open bite versus non-open bite. This retrospective study was based on the examination of 40 patient, 19 males and 21 females, with a mean age 22.3 years. The patients were divided into two groups based on open bite and non-open bite skeletal Class III malocclusion patients. The cephalometric records of 40 skeletal Class III malocclusion patients (open bite: n = 18, non-open bite: n = 22) were examined at different time point, i.e. before surgery(T1), immediately after surgery(T2), one year after surgery(T3). Bilateral sagittal split ramus osteotomy was performed in 40 patients. Rigid internal fixation was standard method used in all patient. Through analysis and evaluation of the cephalometric records, we were able to achieve following results of post-surgical stability and relapse. 1. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in maxillary occlusal plane angle of pre-operative stage(p>0.05). 2. Mean vertical relapses of skeletal Class III malocclusion patients with open bite were $0.02{\pm}1.43mm$ at B point and $0.42{\pm}1.56mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.12{\pm}1.55mm$ at B point and $0.08{\pm}1.57mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in vertical relapse(p>0.05). 3. Mean horizontal relapses of skeletal Class III malocclusion patients with open bite were $1.22{\pm}2.21mm$ at B point and $0.74{\pm}2.25mm$ at Pogonion point. In skeletal Class III malocclusion patients with non-open bite, $0.92{\pm}1.81mm$ at B point and $0.83{\pm}2.11mm$ at Pogonion point. There was no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in horizontal relapse(p>0.05). 4. There were no significant statistical differences between open bite and non-open bite with skeletal Class III malocclusion patients in post-surgical mandibular stability(p>0.05). and we believe this is due to minimized mandibular condylar positional change using mandibular condylar positioning system and also rigid fixation using miniplate 5. Although there was no significant relapse tendency observed at chin points, according to the Pearson correlation analysis, the mandibular relapse was influenced by the amount of vertical and horizontal movement of mandibular set-back(p=0.05, r>0.304).

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.319-329
• /
• 1994

This study was carried out to research the adaptation patterns of head posture after activator therapy in functional class III malocclusion patients. For this purpose, 29 functional class III malocclusion patients, from the ages of 8 to 13 years old, were used. 1, Increse in capacity of oral cavity capacity were found in all the samples, but craniocervical angulation were varied into incresed group and decreased group after activator therapy. 2. Head posture exhibited the compensatory adaptation in the relative growth increments of the vertical dimension, ALFH and PLFH. 1) A group with more PLFH and less sagittal angle showed relatively small growth increment in PLFH during the treatment period, thus craniocervical angulation was increased. 2) A group with less PLFH and more sagittal angle showed relatively great growth incrmenet in PLFH during the treatment period, thus craniocervical angulation was decreased.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.801-813
• /
• 1997

A comparative study was made on the chewing movements of normal occlusion and skeletal class m malocclusion. Thirty normal occlusion subjects and twenty skeletal class III malocclusion patients were given chewing gums for the study : using BioPAK system, the chewing movement on the frontal plane was recorded and analyzed. With a typical chewing path chosen representing each subject, chewing width, opening distance, opening and closing angles, maximum opening and closing velocities were observed. Seven characteristic patterns were classified based on the types of chewing paths. The followings are the results : 1. Compared with the normal occlusion group, the skeletal class III malocclusion group showed more varied and vertical chewing patterns. 2. In comparision of chewing widths, skeletal class m malocclusion group showed narrower path than the normal occlusion group(p<0.01). 3. In opening distance, skeletal class III malocclusion group appeared shorter than the normal occlusion group without statistical significance(p>0.05). 4. In opening and closing angles, skeletal class III malocclusion group showed more acute angles than the normal occlusion group(p<0.01). 5. In maximum opening and closing velocities, skeletal class III malocclusion group was slower than the normal occlusion group but with no statistical significance(P>0.05). 6. In the classification of chewing movement pattern, the normal occlusion group had Type II as the highest rate at 73.4% ; in skeletal class III malocclusion group, the highest rate was Type III at 35.0%, followed by Type II at 30.0% 7. In the classification of chewing movement pattern, Type IV(chopping type)of skeletal class III malocclusion group showed a higher rate with 25.0% over 3.3% of normal occlusion group.