• Design & Manufacturing
• /
• 제13권1호
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.505-509
• /
• 2013

Background The aim of this study was to collect important data on the time of oxygen saturation change in relation to skin flap color alteration using non-invasive pulse oximetry to evaluate its ability to provide continuous monitoring of skin flap perfusion. Methods An experimental study on the monitoring of blood perfusion of 20 tube-island groin flaps of 10 male New Zealand rabbits was performed using pulse oximetry. The animals were randomly assigned to one of two groups representing a blockage of either arterial or venous blood flow. The oxygen saturation change and clinical color alteration were monitored from the beginning of vessel clamping until the saturation became undetectable. The result was analyzed by the t-test using SSPS ver. 10.0. Results The mean times from the vessel clamping until the saturation became undetectable were $20.19{\pm}2.13$ seconds and $74.91{\pm}10.57$ seconds for the artery and vein clamping groups, respectively. The mean time of the clinical alteration from the beginning of vein clamping was $34.5{\pm}11.72$ minutes, while the alteration in flaps with artery clamping could not be detected until 2.5 hours after clamping. Conclusions The use of neonate-type reusable flex sensor-pulse oximetry is objective and effective in early detection of arterial and vein blockage. It provides real-time data on vessel occlusion, which in turn will allow for early salvaging. The detection periods of both arterial occlusion and venous congestion are much earlier than the color alteration one may encounter clinically.

• Journal of Chest Surgery
• /
• 제41권1호
• /
• pp.61-67
• /
• 2008

배경: 여러 가지 원인에 의해서 일반적인 상행대동맥 차단법을 이용한 수술이 제한되는 경우가 있다. 본 연구는 대동맥 내 풍선카테터를 이용하여 대동맥 내 차단법을 이용한 수술의 효용성 및 안전성에 대해 알아보고자 하였다. 대상 및 방법: 2004년 4월부터 2007년 1월까지 총 7명의 환자에서 대동맥내 차단법을 이용한 수술을 시행하였다. 6예에서 RAP catheter를 사용하였고, 2예에서 Pruitt's balloon catheter를 사용하였다. 원인 질환으로는 흉골하 대동맥 근부의 가성대동맥류가 4예, 상행대동맥의 광범위한 석회화를 동반한 대동맥 판막 역류증이 2예, 심방중격결손이 1예이었다. 5예에서 이전에 1회 이상의 심장수술을 받은 과거력이 있었다. 결과: 전 예에서 성공적인 도관의 삽입 및 대동맥 차단이 이루어졌다. 1예에서 RAP catheter의 풍선이 파열되어, 상행대동맥 내 풍선도관을 추가적으로 삽입하여 대동맥 차단을 하였다. 수술사망은 없었으며, 대동맥 박리, 뇌졸중이나 혈관계 합병증은 없었다. 결론: 대동맥 내 풍선을 이용한 대동맥 차단법은 전통적인 수술방법으로 접근하기 어려운 질환에서 유용한 대안으로 이용될 수 있다고 생각된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.357-362
• /
• 2006

쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 바람이 불면 쐐기작용에 의해 큰 압착력으로 레일을 압착하는 구조를 가지고 있다. 이 때 쐐기작용을 위해 레일클램프는 레일을 따라 이동하게 되는데, 만약 지지대를 설치하지 않으면 밀림거리가 증가하여 구조물을 파괴에 이르게 하는 과부하가 발생하게 되므로 이를 방지하기 위한 지지대를 적절히 설치하여야 한다. 이러한 지지대의 적정위치는 초기압착력과 쐐기각에 따라서 결정되므로, 본 연구에서는 이러한 초기압착력과 지지대의 적정위치사이의 관계에 대하여 살펴보기 위하여 5가지 쐐기각을 설계변수로 하여 유한요소해석을 수행하였다.

• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.65-70
• /
• 2007

쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 바람이 불면 쐐기작용에 의해 큰 압착력으로 레일을 압착하는 구조를 가지고 있다. 이 때쐐기작용을 위해 레일클램프는 레일을 따라 이동하게 되는데, 만약 지지대를 설치하지 않으면 밀림거리가 증가하여 구조물을 파괴에 이르게 하는 과부하가 발생하게 되므로 이를 방지하기 위한 지지대를 적절히 설치하여야 한다. 이러한 지지대의 적정위치는 초기압착력과 쐐기각에 따라서 결정되므로, 본 연구에서는 이러한 초기압착력과 지지대의 위치사이의 관계에 대하여 살펴보기 위하여 5가지 쐐기각을 설계변수로 하여 유한요소해석을 수행하였다.

• 소성∙가공
• /
• 제29권6호
• /
• pp.331-337
• /
• 2020

Blind rivet nuts (BRNs) are increasingly used in automotive industry because unlike conventional bolt fastening, BRN fastening requires access from one side only. Generally, fastening is conducted using automated units, but manual fastening may be resorted to in case of small quantities. Since the fastening direction is not exactly perpendicular to the sheet metal, the BRN axis is tilted with respect to the plate and may result in damage or incomplete fastening. As the tilt angle (clamping angle α) increases, undesired plate deformation occurs and the contact area of the plate with the BRN fastening area decreases, reducing the clamping effect. In this study, the reduction of the clamping effect with the α was investigated to ensure stable fastening force. M6 BRNs were used in the tests. The fastening force was measured as follows: the plate was cut in half through the center of the hole; the BRN was inserted into the hole and fastened; and the clamping angle a was measured (values, 0° ≤ α ≤ 9°). The force leading to the separation of the halves was measured using a universal testing machine (UTM). The maximum α range, in which the fastening force remains stable, was determined. Finite element (FE) analysis confirmed that the fastening force decreases approximately linearly with increasing α. Based on the experiment and FE analysis using various α, the fastening force was found to decrease with α. Further, the maximum tolerance for α that provides secure fastening without damage is suggested.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.291-297
• /
• 2009

실험을 통해 고장력 볼트의 릴렉세이션를 측정하였다. 종류와 표면 처리가 다른 볼트를 사용하여 체결길이가 서로 다른 블록형태와 겹침이음형태의 시험체를 조립하였다. 항온항습실에서 시간 경과에 따라 볼트에 도입된 축력을 변형률 게이지를 통하여 측정하였다. 볼트축력의 감소율은 모든 시험체에서 10% 미만으로 나타났다. 결합 형태, 볼트종류, 체결길이 그리고 볼트의 표면 처리가 서로 다른 여러 경우에 대해 실험결과를 이 연구에서 제안한 릴렉세이션 추정 모델을 이용하여 비교, 검토하였다. 제안한 모델은 여러 경우에 대한 실험 결과와 모두 합리적으로 잘 합치하고 있다. F13T와 F10T 볼트사이에 차이점을 발견할 수 없으나 다크로 볼트의 최종 체결력 감소율은 일반 볼트보다 30% 정도 높으며, 또한 전체적으로 볼트 체결길이가 짧아짐에 따라, 전단면의 수가 증가함에 따라 높아지는 경향을 보여주고 있다.

• Journal of Chest Surgery
• /
• 제20권2호
• /
• pp.230-240
• /
• 1987

Cardioplegia and myocardial protection were performed under cardiopulmonary bypass during open-heart surgery with the use of cold St. Thomas Hospital cardioplegic solution [4=C] for the coronary artery perfusion and normal saline solution [4- C] for the topical cardiac cooling. To maintain the state of myocardial protection, coronary artery reperfusion was carried out using St. Thomas Hospital cardioplegic solution at the interval of 30 minutes. A total number of patients studied were 57 cases, including 37 cases of correction for congenital cardiac anomalies and 20 cases for acquired heart valvular diseases. Cardiopulmonary bypass time during the surgery was observed to be average of 87.89*47.55 hours, aortic cross-clamping time to be average of 76.68~44.27 hours raging from 30 to 191 minutes. In order to evaluate the effects of myocardial protection in the surgery, serum enzyme levels were determined. To observe the relationship between aortic cross-clamping time and myocardial protection effects, patients studied were divided into the following 3 groups. I group: aortic cross-clamping time, 60 minutes, II group: aortic cross-clamping time, 90 minutes, III group: aortic cross-clamping time, over 91 minutes. 1. Changes in serum enzyme levels in postoperative period. [1] SCOT; The postoperative value [increased over 200 units] for ischemic myocardial injury during operation was observed in 11 cases [19.3% of the total] of the total patients studied, of which 4 cases [13.3%] in I group, 1 case [10.0%] in II group, and 6 cases [35.3%] in III group. [2] LDH; The positive value [increased over 900 units] for ischemic myocardial injury during operation was observed in 9 cases [15.7% of the total] of the total patients studied, of which 2 cases [6.6%] in I group, 1 case [10.0%] in II group, and 6 cases [35.3%] in III group. [3] CPK; The positive value [increased over 800 units] for ischemic myocardial injury during operation was observed in 10 cases [17. 5% of the total] of the total patients studied, including 4 cases [13. 3%] in I group, 1 case [10.0%] in II group, and 5 cases [29.4%] in III group. 2. The myocardial protection method used in the present study was demonstrated to be effective for the myocardial protection in the surgery with aortic cross-clamping time of up to 90 minutes. A few ischemic myocardial injury were observed in the surgery with aortic cross-clamping time over 91 minutes, but no significant cardiac dysfunction was noted. The surgery with aortic cross-clamping time of up to 191 minutes did not appear to give rise any significant interference with postoperative recovery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.791-793
• /
• 1987