• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.13-22
• /
• 2018

이 연구는 이방성 평판의 휨 해석을 위한 지배방정식을 유도하고 다양한 경계조건을 갖는 평판의 정확한 풀이과정을 제시하였다. 이 해법은 삼각급수를 이용하여 미분 방정식을 대수학적 방정식으로 변환시키는 전통적인 Navier와 Levy의 방법을 따랐다. Levy의 방법을 이용해 해를 구하려면 평판의 마주보는 두 끝단이 단순지지단인 경우에만 가능하다. Navier의 방법은 사각평판의 네 끝단이 모두 단순지지단 이어야 한다. 본 연구는 Navier와 Levy해법이 갖는 경계조건 한계를 극복하였다. 이 해법은 평판 네 끝단의 경계조건이 단순지지단과 고정단의 어떤 조합이라도 적용될 수 있다. 하중조건도 분포하중, 부분하중 그리고 선하중에 대해 적용할 수 있다. 이 해법의 장점은 Navier와 Levy해법이 갖는 경계조건 한계를 극복하였을 뿐만 아니라 정확한 해를 구할 수 있다. 비대칭 경계조건을 갖는 이방성평판에 대하여 이 해법을 이용한 계산결과를 나타냈다. 또한 Navier해법과 Levy해법 그리고 Szilard의 계산결과와 비교를 보여주었는데 계산된 처짐량이 잘 일치한다.

• 전산구조공학
• /
• 제10권4호
• /
• pp.165-175
• /
• 1997

본 연구에서는 현재 자동차구조에 사용되고 있는 점용접 보강 리어사이드 프레임, 비보강 리어사이드 프레임 및 레이저 용접을 이용한 이종두께 리어사이드 프레임의 응력, 좌굴 및 진동해석이 수행되었다. 응력 및 진동해석의 경계조건은 양단고정이며, 좌굴해석시에는 단순지지 경계조건을 사용하였다. 구조해석에는 ANSYS 5.0 Code를 사용하였다. 점용접된 리어사이드 프레임의 최대응력은 메인프레임에서 발생하였으며, 그값은 80.9MPa이다. 이때의 최대변형률은 501.mu.이다. 이종두께 레이저 용접된 리어사이드 프레임은 두께가 1.8mm일 때 점용접 보강 리어사이드 프레임의 최대응력과 같아진다. 따라서 동일등가 응력을 기준으로 할 때 레이저 용접을 이용하면 중량을 17.2% 줄일 수 있다. 양단 단순지지된 보강 점용접 리어사이드 프레임의 좌굴하중은 52.54kN이다. 이때 동일한 좌굴하중을 갖는 이종두께 레이저 프레임의 두께는 1.9mm이다. 따라서 중량을 15% 감소시킬 수 있다. 보강된 점용접 리어사이드 프레임의 고유진동수는 163.6Hz로 굽힘모드이며, 이종두께 레이저 용접 리어사이드 프레임의 고유진동수는 179.8Hz이다.

• Radiation Oncology Journal
• /
• 제13권3호
• /
• pp.205-214
• /
• 1995

목적 : C3H 마우스의 섬유육종에 있어서 저산소 분획 및 대사상태에 미치는 Ginkgo biloba extract (GBE)의 영향을 알아보기 위해 본 실험을 시행하였다. 방법 : C3H 마우스의 우측 대퇴부에 이식한 섬유육종이 6mm가 되었을 때 $TCD_50$를 이용하여 저산소 세포 분획을 계산하였다. 방사선은 GBE (100mg/kg) 1회 투여시는 1시간 후에, 2회 투여시는 24시간 간격으로 2회 투여후 1시간 경과후 방사선을 조사하였으며, 산소공급이 충분한 상태와 결찰에 의한 저산소 상태에서 각각 조사하였다. 종양의 대사 상태 변화를 알아보기 위해 GBE 투여 전과 투여 후 1시간에 각각 ^{31}P$ 핵자기 공명 분광분석법을 시행하였다. 결과 : 종양 치료방사선량은 결찰에 의한 저산소 상태시 81.7 (77.7 - 86.0) Gy, 정상 혈류상태시는 69.6 (66.8 - 72.5) Gy 였으며, GBE 1회 투여한 경우에는 67.5 (64.1 - 71.1) Gy, GBE 2회 투여시는 62.2 (59.1 - 65.5) Gy 로서, 2회 투여시 현저히 감소하였다. 이로부터 계산한 저산소 세포 분획은 정상 혈류 상태에서는 $10.6{\%}$, GBE 1회 투여시는 $7.2{\%}$로 다소 감소하였고, GBE 2회 투여시는 $2.7{\%}$로 현저히 감소하였다. ^{31}P$ 핵자기공명분광분석결과 PCr/Pi 비는 대조군 $0.27{\pm}0.04$, GBE 1회 투여시는 $0.40{\pm}0.04$, 2회 투여시는 $0.71{\pm}0.04$로 GBE 2회 투여시 종양의 대사상태가 현저히 호전되었다. 결론 : 이상의 결과를 종합해 볼 때, GBE 의 투여에 의해 혈류량과 산소 및 영양분의 공급이 증가함에 따라, 저산소세포분획이 감소하였고, 종양의 대사 상태가 호전되어, 종양의 방사선에 대한 감수성이 높아졌다고 판단되었다.

• 대한수의학회지
• /
• 제32권2호
• /
• pp.157-164
• /
• 1992

Changes in the both inward current and conductance of membrane by the fertilization were observed using the one microelectrode voltage clamp(or switch clamp) technique. Unfertilized eggs and both 1- and 2-cell stage eggs after fertilization were donated from the superovulated mouse (ICR, more than 6 weeks old) treated with PMSG(pregnant mare serum gonadotropin, Sigma) and HCG(human chorionic gonadotropin, Sigma) and naturally mated ones, respectively in this experiment. Membrane potential was held at -90mV and the voltage step was applied from -80mV to 50mV with interval of 10mV or 20mV for 300ms. since both of amplitudes and time courses in the membrane currents were various according to the states of cells and clamping condition, results were presented by their $averages{\pm}SEM$(standard mean error)and ratios or percentages. Inward currents began to appear in response to the step depolarization from -60mV and reached its maximum at -50mV. However, since the potential was not clamped evenly during the voltage step, current-voltage(I-V) relationship might be positively shifted 10 or 20mV. From the steady-state currents plotted in the I-V curve, outward rectification was markedly observed. Peak inward currents$(i_{in})$ at -50mV were $-0.62{\pm}0.23nA$(n=4),$-0.52{\pm}0.25nA$(n=5) and $-0.37{\pm}0.25nA$(n=6), in the 1-cell stage, 2-cell stage fertilized eggs and in the unfertilized eggs, respectively. Pure inward current (difference between steady-state and peak, $i_{in. pure}$) were $-1.01{\pm}0.23nA$, $-0.69{\pm}0.43nA$ and $-0.68{\pm}0.29nA$, respectively in the 1-cell stage fertilized eggs, unfertilized eggs and 2-cell stage fertilized eggs. These results suggested that the outward current in fertilized eggs of 2-cell stage was more increased than those in the unfertilized eggs. Pure inward currents in the all stages of eggs showed a similar fashion in the I-V relationship from -50mV to 50mV and reversal potential at 50mV. Time constant of inactivation$({\tau})$ in the inward current was decreased as the membrane potential was depolarized in the unfertilized and 2-cell stage eggs but in the 1-cell stage eggs t was not likely to be affected significantly. Slope conductances were 14.2nS, 8.9n5 and 7.7nS in the 1-cell, 2-cell stage fertilized eggs and the unfertilized eggs, respectively. Membranes between two cells within a zona pellucida seem to be electrical-connected in the 2-cell stage eggs from the observation made in the analysis for the electronic spread and decay to the current stimuli. Both of inward current and membrane conductance were increased after fertilization in the mouse eggs. Inward current seems to be carried by the same ion or through the same channels up to the 2-cell stage and ion that carried inward current was thought to play important function after fertilization in the mouse eggs.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.