• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.15-19
• /
• 2013

Tail wing is important to designing of civil aircrafts, because it is responsible for aircraft stability and control. Tail wing has a role in aircraft control and makes aircraft fly stably without any pilot control input. Also, designing of tail wing determine trim drag force in whole aircraft. Center of gravity(CG) of aircraft travels with various effects as placement of passenger's seats, location of cargo bay, etc. In designing horizontal tail volume, aircraft CG travel has to be considered to have margin so that it should be sized to provide adequate stability and control for the airplane's entire CG range throughout the flight envelope. Finally, it is essential to have sufficient elevator control to perform stall at forward CG for all flaps down configurations. Such stalls establish the FAR stall speed which airplane take-off and landing performance. This paper deals with the process for tail wing design regarding the aircraft CG travel and results for 95-seat type turboprop aircraft.

• The Korean Journal of Air & Space Law and Policy
• /
• v.18
• /
• pp.325-362
• /
• 2003

In an effort to enhance the independence of and expertise in military aircraft accident investigation, a permanent accident investigation board should be established. Establishing permanent accident investigation board would render the military accident investigation more reliable and would increase its public esteem. Because there is no provision governing the responsibilities of the investigation and cooperation between civil and military authority in case that both civil and military aircraft are involved, it is necessary to fill this gap by enacting appropriate laws. In case of civil aircraft accident investigation involving a military issue, it would be better to allow military authority to be involved in the investigation. For the betterment of investigation, it is also necessary to provide a field investigator an authority to directly collect relevant information. Since the sole purpose of accident investigation is to prevent the recurrence of aircraft accidents, the scope of information disclosure should be limited and the investigation report shall be used for neither criminal procedure nor disciplinary procedure so that the objectivity of the investigation should be ensured.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.54-59
• /
• 2010

After the advent of B787(Boeing Co.), a civil aircraft using composite materials more than 50% of it total structural weight for weight savings，best performances and efficiencies, various endeavors to develop and apply the state of art of structural health monitoring(SHM) technologies for composite aircraft have been made for many years. Despite their plentiful advantages composite aircraft structures are susceptible to the hidden or barely visible impact damages(BVID) and excessive loads that if unchecked may lead to lower structural integrity, loss of operational performance and finally a sudden catastrophic failure of the aircraft structure. In this paper background of SHM technology and relevant technologies for application of SHM technology to the composite aircraft in the near future and requirements for certification of SHM system are shortly presented.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.35-41
• /
• 2015

Multilateration(MLAT) is commonly used in civil and military surveillance applications to accurately locate an aircraft, vehicle or stationary emitter. MLAT calculates the TDOA of signals by transmitted aircraft and determines the aircraft's location. With more than four receivers it is possible to estimate the 3D position of the aircraft by calculating the intersection of the resulting hyperbolas and the system integrity. In this study, our objectives are to apply MLAT technique to Jeju terminal control area and to propose a MLAT receiver network to properly estimate the positions of aircraft approaching this area. Based on computer simulations, we determine locations of ground receivers in Jeju terminal control area, calculate estimated position errors of the aircraft with respect to the selected receiver networks, and find the best receiver network with the least position error.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.321-384
• /
• 1993

The paper is to study and analyze the civil aviation industry of China and to present some cooperative and developing models between Korea and China in the fields of civil aviation on the basis of mutul benefit. In this study, civil aviation includes both the air transport industry and aircraft manufacturing industry. As it is not easy and realistic for us to conduct field survey on the civil aviation of China so far, this study has havily depended upon the literature data gathered from the ICAO and other published materials. This study includes the following major contents. 1. The historical development of China civil aviation 2. The present status and future prospect of Civil Aviation Adminstration of China(CAAC) 3. The present status of Chinese aircraft industry 4. Administration of airport and airspace of China 5. Air transport industry of China 6. The design of Korea-China civil aviation cooperation

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2013

In this study, the structural performance of nuclear power plant containment buildings, which are made of steel fiber reinforced concrete(SFRC) and subject to aircraft crash, is examined by finite element analyses. The applied loads by aircraft crash against the buildings are modeled using Riera impact load function and by the varying aircraft contact area with respect to time. CSCM concrete model in LS-DYNA is employed to model SFRC. The parameters for the material model are determined from SFRC strength prediction models. Based on the volume ratio of steel fiber in SFRC, the structural performance of nuclear containment buildings subject to aircraft crash are analysed using a commercial finite element analysis program LS-DYNA. The safety assessments of the buildings subject to the crash are discussed and the effectiveness of SFRC for nuclear power plant containment building on the increase of aircraft crash resistance is also evaluated.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.9 no.2
• /
• pp.63-76
• /
• 2001

The number of civil aviation aircraft registered in Korea has continuously increased. Accordingly the accidents accompanying loss of human or economic resources occurred repeatedly. But the analysis of flight data recorded in FDR was not done by ourselves in the accident investigation because of lack of analysis technology. Therefore, this study is performed to secure the safety of civil aviation by establishing systematic analysis ability of Flight Data Recorder. Through this study, download flight data to personal computer, editing interface file to convert from binary data to engineering data, three dimensional graphical analysis and numerical analysis are performed. For the analysis, the flight of B747-400 model aircraft between Narita(Japan) and Gimpo(Korea) was selected.

• Structural Engineering and Mechanics
• /
• v.17 no.1
• /
• pp.29-50
• /
• 2004

A total life model was developed to assess the service life of aging aircraft. The primary focus of this paper is the development of crack growth life projection using the response surface method. Crack growth life projection is a necessary component of the total life model. The study showed that the number of load cycles N needed for a crack to propagate to a specified size can be linearly related to the geometric parameter, material, and stress level of the component considered when all the variables are transformed to logarithmic values. By the Central Limit theorem, the ln N was approximated by Gaussian distribution. This Gaussian model compared well with the histograms of the number of load cycles generated from simulated crack growth curves. The outcome of this study will aid engineers in designing their crack growth experiments to develop the stochastic crack growth models for service life assessments.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.245-253
• /
• 2008

Quality for civil aviation is very important to maintain the safety of aircraft and public, and strict quality requirements are prescribed in aviation regulations to ensure that each article produced conforms to the type design and is a condition for safe operation. In this study, the quality system requirements for aircraft and parts will be reviewed a concept of FAA's ACSEP(Aircraft Certification System Evaluation Program) and policy for aviation quality system evaluation in comparison with AS9100 for aviation quality management system.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.268-283
• /
• 2016

Aircraft manufacturing companies have to consider multiple derivatives to satisfy various market requirements. They modify or extend an existing aircraft to meet new market demands while keeping the development time and cost to a minimum. Many researchers have studied the derivative design process, but these research efforts consider baseline and derivative designs together, while using the whole set of design variables. Therefore, an efficient process that can reduce cost and time for aircraft derivative design is needed. In this research, a more efficient design process is proposed which obtains global changes from local changes in aircraft design in order to develop aircraft derivatives efficiently. Sensitivity analysis was introduced to remove unnecessary design variables that have a low impact on the objective function. This prevented wasting computational effort and time on low priority variables for design requirements and objectives. Additionally, uncertainty from the fidelity of analysis tools was considered in design optimization to increase the probability of optimization results. The Reliability Based Design Optimization (RBDO) and Possibility Based Design Optimization (PBDO) methods were proposed to handle the uncertainty in aircraft conceptual design optimization. In this paper, Collaborative Optimization (CO) based framework with RBDO and PBDO was implemented to consider uncertainty. The proposed method was applied for civil jet aircraft derivative design that increases cruise range and the number of passengers. The proposed process provided deterministic design optimization, RBDO, and PBDO results for given requirements.